Watch a product review

Alpine PDX-V9

5-channel car amplifier — 100 watts RMS x 4 + 500 watts RMS x 1

Item #: 500PDXV9

In Stock

18 Reviews

Your price: $699.99 Earn up to 700 Rewards points

Add to Cart

+ Add to wishlist + Email me alerts for this product

View all associated offers

Alpine Authorized Online Dealer

5-channel powerhouse

The Alpine PDX-V9 5-channel amp delivers a whopping 100 watts RMS each to four speakers at the same time it blasts 500 watts RMS to your sub setup. This amazingly compact amp uses beefy internal components and clever engineering to keep the power output strong and the noise low for superb fidelity and control. The adjustable crossovers feature an extended range of crossover points, allowing you to use this amp with component tweeters, midrange speakers, or midbass drivers.

They make a cool stack of amps

Alpine packs Class-D amplifier technology into this PDX amplifier for awesome power from a 2" tall frame. This small-but-mighty amp runs so cool that you can stack it together with other PDX amps into a single unit — the multiple heatsinks actually couple together to cool the entire stack. Each PDX Series amp offers the same 8" by 10" footprint, so they'll fit in hatchbacks, trunks, truck cabs, and any vehicles with limited space.

PDX-V9 connection panel

Front-mounted controls and pop-out connectors

Front-mounted controls make post-installation adjustments a snap, even when multiple amps are stacked together. Nifty removable speaker and power wire plugs make it easy to install or remove an amp, ensuring a tight connection while guaranteeing that your speakers work in unison. Gold-plated RCA inputs, outputs, and power connections resist corrosion and signal degradation.

PDX-V9 control panel

Note: Sorry, Crutchfield cannot ship Alpine products to Guam or Puerto Rico.

Product Highlights:

  • 5-channel car amplifier
  • 100 watts RMS x 4 + 500 watts RMS x 1 at 2 or 4 ohms
  • 200 watts x 2 bridged at 4 ohms + 500 watts x 1
  • CEA-2006 compliant
  • stackable installation design with front-panel controls
  • variable high-pass filter on front channels (30-6000 Hz, 12 dB/oct)
  • variable high-pass filter on rear channels (30-600 Hz, 12 dB/octave)
  • variable low-pass filter on subwoofer channel (50-600 Hz, 24 dB/oct)
  • variable subsonic filter on subwoofer channel (0-30 Hz, 24 dB/oct)
  • quick-connect speaker connectors
  • Class-D amplifier design
  • MOSFET power and output stages
  • fuse rating: 40A x 2
  • 4-gauge power and ground leads recommended — wiring and hardware not included with amplifier
  • 10-1/8"W x 2-1/16"H x 8-9/16"D
  • warranty: 1 year
  • Our 60-day money-back guarantee

My system has plenty of power. Who needs an amp?

You might think you don't need an amp because you have a 400-watt system in your car, or because your new stereo puts out 50 watts a channel. But those are peak wattage ratings, which may boil down to 15 or 20 watts per channel, using the more realistic RMS rating. An amp sends your speakers the power they need to deliver your music with clarity and impact, whether you're using factory speakers or high-performance components. And low-frequency reproduction requires lots of power, so an amp is an absolute must if you're adding a sub to your system.

Alpine PDX-V9 Reviews

Average Customer Review:

18 reviews
Review this product
Great Gear Giveaway

Submit a review and then enter to win a $350 rewards card


Review this product:

Thanks for taking the time to share your experiences about this product. Please be sure to focus your comments on the product itself. Read our Review Guidelines for more information.

Your email won't be visible. Please use the email address that is associated with your order.
(e.g., JohnD) Your review will be signed using the display name and location
(e.g., Charlottesville, VA)

Click on a star to rate the overall product on a scale of 1-5
1500 characters left
  Attach a YouTube Review
Crutchfield Video Review Guidelines
  • Only submit videos that you made or are authorized to use.
  • Do not submit videos that contain music, video or visuals that are copyrighted and belong to someone else.
  • Please see our Review Guidelines for more information.
500 characters left
500 characters left

500 watt bass channel questionable

Written By Rich, norcal on Sunday, November 01, 2015

Purchased to run entire system off one amp in a Tundra crew max.6X9 kicker sepperates up front with kicker tweets in sails and polk tweets in the dash running off front channel and some kicker 6.5 door speakers in the back.JL Audio SB-T-TUNDCMAX/13TW5v2 single stealth box in the back.I was running a pioneer gm d8604 and it sounded good but changed it up when I got a sub.The Alpine sounds clean with plenty of power to run the 4 channels but its not quite driving my sub as expected.Before purchasing the Alpine I unplugged the rear speekers and just bridged the rear channel which provided the sub with 300 watts rms.Upgraded with this Alpine that they list as providing a dedicated 500 watts rms to the mono channel and sadly there was no change in power?I should feel the thump and the pressure on my back with 500 watts rms 3 ohm load.Amps birth sheet listed it as 115 watts x4 and 510w x1.Funny when I first read this and it stuck in my head as 5 (10w) bass outpute.My JL Audio SB-T-TUNDCMAX/13TW5v2 is quite under powered I don't think its pushing 500 watts not when there is no change with another amp that pushes 300 out of two of the 4 channels.Ground checks and 13.8-14+ supplied.Time to dig out the MTX pro BLUE thunder old school dependable no bs power where a 400 watt rms equals a 640 watt rms birth sheet.This amp shook windows of 3 or 4 cars ahead of me?

Pros: Clean sounding amp

Cons: 500 watt rms to sub channel is not accurate.

Allot of thought went into this amp!!

Written By Bravo, Texas on Sunday, July 26, 2015

Look, I have had two 12 inch JL w3 V3 subs hooked up to this amp in my Crew Cab Silverado and it was plenty of power and great sound. I wanted deeper base so I bought one JL W6 V3 subs in a JL Box, and I had to turn the gain down because it was to much power for the sub, but it was still not enough bass. Now I have two SA 8 V.2 Sundowns under my back seat rated at 500 watts RMS a piece. I was worried that I wouldn't get the sound I was looking for with only 250 watts a sub but I was wrong!! My birth sheet was 568 and I did all the install work my self, the hook ups on the back for the speaker wire was just well thought out. My gain and filter for my Focal 165 KRS on the front of the amp make tuning easy. I have this amp mounted underneath my front middle seat, Its like a secret storage box built from the factory and every time I show to some one they are amazed that one amp does all that sound and fits tucked away under my seat. They all are also blown away that I did it my self because it really looks professional, I owe that to the Alpine for the easy plugs they designed. I have had no problems with this amp. YOU WILL NOT BE DISAPPOINTED WITH THIS AMPS SIZE, QUALITY, POWER AND VERSATILITY. Do your self a favor buy this amp and buy the bass knob. Bravo out!

Pros: Compact, powerful, functional and simple design. Well thought out design.

My First Digi-Amp . . .

Written By BiggJonn, Maryland on Monday, May 18, 2015

I just bought my FIRST digi-amp for my 2015 Ford Fusion ... THIS ... THING ... ROCKS!! True it is a bit pricey ..BUT.. it IS an Alpine. Now, be it that I'm not all into the competition thing nor do I need to have it up so loud you can hear me coming down the road ... the clarity is outstanding. I've paired this up with Pioneer TS-D speakers and a Kicker L7-12 in the back and i couldn't have been happier with what ( comes the plug...) POPTRONICS in Baltimore, Md suggested / sold / installed. I got mine . . . You better get yours

Pros: small size .. packs a mean punch .. powers entire system

Cons: it IS pricey ...BUT... it IS an ALPINE (and you get what you pay for)

decent power in a small package

Written By JIReady, Georgia on Tuesday, May 12, 2015

Crutchfield Customer Review (What's this?)

Has all the crossovers and adjustments you will ever need and decent power for such a small package. I have door speakers on 4 channels and 2 jl w1's on the sub channel and I was surprised just how much bass I got out of this. It came pre tested with 125 watts on the four door channels and 550 watts on the sub channel.

Pros: 150 extra watts for free. Small size.

Cons: Gets so hot at times it released a small amount of oil out of the bottom when I first broke it in.

Exceeded expectations

Written By Anonymous, Texas on Tuesday, May 12, 2015

Crutchfield Customer Review (What's this?)

The birth certificate that came from the factory stated actual 125watts x 4 and 555watts x 1 so installed speakers and subs that could handle the power and it does so effortlessly. The wiring is stupid simple whereas anyone can do it and the overall build quality is on par with Alpines reputation..

Pros: Lots of power in a relatively small package

Cons: None noted


Written By Juan, forth worth, tx on Sunday, December 21, 2014

I love this amp im i running everthing with single amp its expensive but you would save money if using 2 amps i have it with 4infinity 5×7 and 2 w1 jl audio and a custom box under the back seat of a 2003 f150 supercrew

Pros: Run all you system with this amp and its small fits everywhere

Cons: none


Written By Steffon, michigan on Wednesday, July 16, 2014

Crutchfield Customer Review (What's this?)

ive had this amp for only a few weeks now, but so far I am highly satisfied with this amplifier. I have pushed it very hard and it doesn't lose its clarity. I have it paired with two alpine swa 12s4 subwoofers and four 6 3/4 kicker cs speakers and it just pounds in my firebird. I couldn't be happier. \

Pros: sound clarity, small

Cons: it tends to get a bi hot even though it is out in the open with plenty of air movement

Alpine PDX-V9

Written By Homer, Millbury, MA on Tuesday, July 01, 2014

Crutchfield Customer Review (What's this?)

Works great have all car speakers hooked up gives good sounding clean power...running a 15" sub that has a 350w draw and everything runs clean and sounds great

Great power, small package

Written By dnut, Ann Arbor, MI on Saturday, June 14, 2014

Crutchfield Customer Review (What's this?)

Bought this unit to power the upgraded 5 speaker system in my new 2014 Mustang. After a lot of looking around, decided to pick this amp as the base unit for the system. Has great power - the system actually goes louder than I can take it - much more than the Shaker 500 system in my previous 2006 Mustang. The unit is small enough that I mounted it under the rear deck - so I still get to keep the trunk space that I had, minus the sub in the corner of course (used the custom fit enclosure for that, so not too bad). Matched with Alpine SPR-68 in front, Rockford Fosgate PPS4-6 in back and Rockford Fosgate 12" P3 sub

Pros: - Great power, clear and clean sound through the range I can take. - Small size makes easy to mount - Nice connectors for the speakers so you can unplug and rearrange wires easily

Cons: None so far.

I must be missing something

Written By SteveB, Fitchburg, MA on Friday, February 14, 2014

Crutchfield Customer Review (What's this?)

Disappointed with the strength delivered to my system. I was truly hoping for more power than I get. Have to turn WAY up to get anywhere near the volume I'd hoped for when powering Alpine SPR-50C component speakers in front, Alpine SPR-69 speakers in the rear, and a JL CS110RG-W3v3 sub in the trunk. The sound quality is quite good, but this system really lacks power.

Pros: Sound quality

Cons: Lack of thump, especially for the price.

Alpine PDX-V9

Written By Anonymous, Aeia HI on Tuesday, October 01, 2013

Crutchfield Customer Review (What's this?)

Perfect for component, 10" sub.

Pros: Small, compact and powerful

Power in Small Footprint

Written By Chris, Bronx, NY on Tuesday, May 07, 2013

Crutchfield Customer Review (What's this?)

I'm currently using this Amp to push Alpine SPR-60C's (component) up front, Alpine SPR-60's (coaxial) in the rears and an Alpine SWR-12D2 in a 2009 Honda Accord. No issue delivering the needed power to all speakers on channels 1-4, nor sub on the 5th channel. The birth sheet included specifically indicated 110W RMS per channel (1-4) and 560W RMS to the sub. The sub has enough power to make the rear deck rattle, so gains are set to normal. When used with the "RUX-KNOB" accessory, the AMP provides full control over your speakers.

I couldn't believe how clear and crisp the highs and lows that are produced. The performance delivered upon initial installation was a bit overwhelming, but a lot of time was needed to adjust the gains and crossover points to get the perfect sound stage needed. This small amp provides the power to adequately run a nice aftermarket system, enough to make a parked car alarm go off if need be. Not my forte though, but nice to know if someone needed the power.

I've never experienced and overheating (weather has been around 60's here in NY) and I have had the Amp running for a good 3+ hours at a time. The real test would be when summer time hits (90+ degree weather). Aside from that, I have not experienced any "hiss" sounds from this amp. I made sure I properly grounded this unit to avoid any electrical noises. The connectors are designed to reduce electrical noise and that's a big plus.

Pros: Power and Efficiency delivered in a compact size for your entire system, including the sub.

Cons: Allen wrench needed to remove the faceplate to gain access to amp settings (channel gains, crossovers, etc).

Smokin' Hot Amp

Written By ScotC, Las Vegas, NV on Tuesday, April 09, 2013

Crutchfield Customer Review (What's this?)

This sucker may be one of the best amps on the market. Each amp comes with a certification of testing, for example, even though this amp says 100W per channel, mine tested out at 144W per channel. My installer dialed down the gains for the cleanest possible sound without distortion and this baby just flat out rocks! It is unbelievably clean, with crystal clear voices and mid-levels, and the bass just booms, baby booms. I had my system installed by a local Master Certified Tech, and even he noted that this was one of the cleanest and most powerful amps he's ever heard. He told me I could power 10 speakers off this if I wanted. Don't hesitate because it's pricey... you get what you pay for.

Pros: Clean, unadulterated power. Everything you need to power your car's system in one package.

Cons: Price ain't cheap.

Can't be beat for the price....

Written By Patrick, Chester, VA on Wednesday, August 08, 2012

I was waiting for Alpine to introduce a more powerful 5-channel amp to their line up, and they finally did! I actually traded up a JL900/5 for the PDX-V9. Same specs and for $300 less. The specs on the PDX-V9 are actually better than the JL900/5, not sure why Crutchfield doesn't list them. I'm not bashing JL Audio in any way, I just couldn't use the JL900/5 for my particular application. The JL amp kept overheating and driving itself into protect mode. Returned one and recieved another, and it did the same thing. Just to find out it was the heat in the trunk driving the internal temperature of the amplifier up even before it was turned on. Anyway, after 2 JL's, decided on the Alpine and absolutley love it! Great sound and plenty of power. I did notice that the Alpine sounds a bit cleaner than the JL, and the gains don't have to be set quite as high. The JL would distort a bit, which was dissapointing, but not the Alpine. The amp runs pretty cool overall even when it's been sitting in the trunk of a car for 8 plus hours in the hot sun. I'm driving 2 pairs of Alpine Type-R's, components in the front and 2-ways in the rear deck. As for a sub, it's pushing a JL Audio H.O. Powerwedge with 12"W6 DVC. The bass is tight and accurate and very LOUD. I wouldn't try to power a W7 with this amp, but mid-grade to some upper end subwoofers will do fine. I would just try to find a subwoofer that is rated for 500W RMS continuous. Overall, I'm very pleased with this Alpine product.

Pros: Plenty of power, small, runs relatively cool, plenty of crossover adjustments

Cons: None that I can think of...

pdx v-9

Written By jplayz187, houston,texas on Saturday, July 28, 2012

the amp is good for what it is,but the sub channel needs more power..waste of money,if you are looking for a amp to run a top of the line sub, go with a mono amp,and add a separate 4 channel amp to go with it. DON'T Waster your money for something that looks good, it lacks power

Pros: the only pro is, it's small

Cons: over priced

Awesome Amp!

Written By Tom T, Eugene, Oregon on Wednesday, July 18, 2012

I have this amp installed in my reinell 207LS Boat. Twp speakers on the tower (6" Kickers), four in the boat itself (6" Alpines), plus an 12" sub. This is the best sounding system I've ever heard in a boat for the price I paid. Nobody can believe how clear and loud that this system is. the amp makes this system!! Takes up littel space and doesn't seem to get too hot.

Pros: Clear, crisp, loud, small, efficient

Cons: None

Alpine PDX-v9

Written By Mike, Chicago on Saturday, June 09, 2012

I have this amp installed in a Toyota FJ Cruiser and this amp rocks. I have it powering 1 set of 61/2 JL Audio C3-650 up front. In the rear I have two Alpine 61/2 and 4" component speakers. For bass I'm using a JL Audio 12w3v3 everything sounds loud and clear the bass hits really hard.

Pros: Small Amp, Good Price for a Powerful 5 Channel Amp.

Cons: None


Written By peter, fountain valley,ca on Sunday, June 03, 2012

great all in one amp. takes up little space.i put this amp under my seat in my dodge ram quad cab. birth card tested at 114watts rms x4 and 586rms mono. it only takes a 4awg wire witch is not that expensive. stays cool even when i go to the desert and crack for hours.

Pros: easy to tune, great quality, and you get what you pay for

Hands-on research

What's in the box?

Download owner's manual

  • 5-Channel Class-D amplifier (with two 40A ATO fuses inserted in chassis)
  • Battery connector plug
  • 5 Speaker connector plugs
  • Four M4 x 36mm Hex/Phillips-head self-tapping screws
  • 2mm Allen wrench
  • 4mm Allen wrench
  • Owner's Manual (Eng/Fre/Spa)
  • Verification Certificate
  • Limited Warranty Card
  • Online Registration Card

Product Research



PDX Amplifier Design: Class-D amplifiers boast higher efficiency, produce much less heat, and draw less current than traditional Class-AB amps. The PDX series is Alpine's super-efficient power density design of full-range and monoblock Class-D amps. They combine MOSFET power supplies, MOSFET final outputs, and a thermal management processor, along with a 6-Layer Glass Epoxy PC Board to create a high-end sound quality without the bulky heat sinks required by most amps with this much power.

STAR Topology: Alpine's unique STAR (Signal Transit for Accurate Response) Circuit PCB design provides a single common ground for all amp sub-blocks, preventing ground interference and minimizing internal noise.

Power Management Processor: The Alpine PDX amplifier incorporates Alpine's new Power Management circuit. The Power Management Processor controls all aspects of amplifier performance, monitoring voltage, temperature and output to ensure uninterrupted power output for non-stop listening.

Uninterrupted Protection Circuits: If the amplifier gets too hot, the Thermal Protection circuit kicks in and gradually decreases output power until it cools down. Once cool, the power output automatically increases back to the previous level. If the circuit detects a Low Battery condition, it will gradually decrease power output if battery voltage becomes too low. Once the battery voltage increases, power will be restored. This interruption-free design allows for non-stop enjoyment with no hiccups or drop-outs, just clean, clear output.

Channel Design: The Alpine PDX-V9 can be configured as a 5-channel, 4-channel, or 3-channel amplifier. The amplifier is stable down to 2-ohms in stereo, and 4-ohms when bridged.

Low Impedance Stability: This amp is stable at low impedances and is capable of its rated power (100 Watts x 4 + 500 Watts x 1) from 2 to 4 ohms. This allows excellent flexibility with multiple speaker and subwoofer loads and is adjusted automatically.

CEA 2006 Compliant: The PDX-V9's power ratings are measured according to the strict standards dictated by the Consumer Electronics Association (CEA). These standards allow you to accurately compare the rated power output of all CEA 2006-compliant amplifiers, even if they come from different brands. Manufacturers who adhere to the standards can display the CEA 2006 logo on their products and packaging.

  • 4 Ohms: 100 watts RMS x 4 and 500 watts x 1 @ 14.4 Volts with <1% THD+N
  • 2 Ohms: 100 watts RMS x 4 and 500 watts x 1 @ 14.4 Volts with <1% THD+N
  • Bridged (4-ohm): 200 watts RMS x 2 @ 14.4 Volts with <1% THD+N

Verification Certificate: The amplifier comes with a certificate that lists the RMS power output of the individual amplifier. It also lists the model number, serial number, test date, and the test conditions (14.4 volts, 4 ohms).

Ultra-Wide Frequency Response: The Alpine PDX-V9 offers a super-wide, frequency range (5Hz-50kHz, +0/-1dB) for unparallel sound quality and detail.

Ultra-Low Output Impedance: With ultra-low output impedance, the PDX-V9 offers extremely controlled, tight bass for unprecedented sound quality. The amplifier's Damping Factor is rated at >500 for channels 1-4 and >1000 for channel 5.

High Signal-to-Noise: This amplifier is capable of S/N ratios up to 92dB S/N at 1W and 112dB S/N at rated power for extremely clean, uncolored sound. The PDX amp delivers crystal clear music every time, without unwanted background noise or static.

Power Supply: The PDX amplifier's power supply delivers tremendous headroom with low distortion and noise. The PDX amplifier has an extremely high total system efficiency of ~80% (power supply is rated at >90%, output stage is rated >90%).

Trim Rings: The PDX-series amps each have removable trim rings that can be custom painted to match your vehicle, or personalized to anything you want.

Stackable: The PDX-series amplifiers are 20% thinner than previous models at only 2" thick. A newly designed stacking system packs the amps closer together so there are no gaps and to save space in the trunk while directly coupling the amps heatsinks to help share cooling duties. The stacking plates are included with other PDX-series amplifiers.

Note: When stacking multiple amplifiers, do not install vertically or at an incline. Any stack installation other than parallel to the vehicle floor, invalidates the warranty.

LED: The top-mounted LED Power indicator glows blue when the amplifier is turned on.


Hidden Controls: The Alpine PDX amplifier's controls are hidden behind a decorative front panel. The front panel is removed by unscrewing one machine screw with the supplied Allen wrench and then prying the front panel open.

Gain Control: The PDX-V9 provides independent rotary controls for the front, rear, and sub channels to set the amplifier's gain according to the level of the incoming signal. The gain settings is continuously variable from 0.2V to 4.0V for the front and rear and 0.1V to 4.0V for the sub.

Optional Remote Bass Control: The amplifier has an RJ-25 modular jack for adding the optional RUX-KNOB Remote Bass Control for full control of the bass adjustments from the dash. You can also control multiple amps from the same controller with simple telephone cord adapters.

Note: The Remote Bass Control will only control the mono subwoofer channel (channel 5).

Crossovers: The Alpine PDX-V9 offers independent crossovers for the front, rear, and sub channels, which can be set as follows:

  • Front (High-pass only): 3-way switch (Off, x1, x10); Frequency: 30-600Hz (x1) or 300-6000Hz (x10)
  • Rear: 3-way switch (Off, HP, LP); Frequency: 30-600Hz (HP) or 300-6kHz (LP, if front switch set to x10); CH3/4 Input Switch (1/2 or 3/4)
  • Sub: Frequency: 50-600Hz (LP), 3-30Hz (Subsonic); SubW Input Switch (1+2+3+4 or SubW)


Terminal Layout: For wiring convenience, all of the inputs and outputs on the amplifier are on one side.

Quick Connect Plugs: The PDX series amplifier uses quick connect plugs to attach your system's speaker wires and power cables to the amp for a simple, error-free installation.

Quick Connect Speaker Terminals: The Alpine PDX-V9 includes 5 quick connect high-power speaker terminals. Bare speaker wire, up to 8 gauge, is held in place by screw clamps on the quick connectors. The speaker terminal quick connectors then plug into the amplifier.

Quick Connect Battery Terminals: The removable battery terminal quick connector features a low-loss, high-current design. It accepts up to 4GA wire for power and ground, to ensure your amp gets the power it needs while allowing for easy installation. The remote-turn on lead will accept up 12 gauge wire. The power, ground, and remote-turn on lead are secured by set-screws on quick connector. The battery terminal quick connector then plugs into the amplifier.

Line Level Input: The Alpine PDX-V9 is equipped with six gold-plated female RCA jacks.

Fuses: The Alpine PDX-V9 is equipped with two 40-amp ATC fuses.

Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.

Product reviews from the Crutchfield Labs

The Alpine PDX-V9 is the "do it all" version of Alpine's popular digital PDX amps. It's small, stackable with other PDX amps, and gives you 100 watts RMS x 4 for your speakers, plus 500 watts RMS x 1...

What are the Labs?