Alpine Authorized Online Dealer

Alpine SPR Component Systems

If you appreciate good music, what better place to create an amazing audio system than in your car? Alpine's SPR Series component speakers offer you smooth, extremely accurate performance that'll set up a powerful soundstage.

High-tech woofers and tweeters

SPR woofer

The SPR-13S component system utilizes 5-1/4" hybrid layered-pulp woofers that send out punchy midbass and vibrant midrange. Textile ring-dome tweeters highlight the vocals and instruments, delivering the subtle details that your old speakers could never reproduce. You can pivot the tweeters up to 15 degrees to optimize the stereo image in your car.

SPR tweeter

Crossovers direct the flow

External 2-way crossover networks direct the high and low frequencies to the correct speakers for seamless sound, high efficiency, and maximum clarity. You just might look forward to driving to work after you experience the change that Alpine components can make in your music.

SPR crossover

Priced per system
Note: Sorry, Crutchfield cannot ship Alpine products to Guam or Puerto Rico.

Product Highlights:

  • system includes two 5-1/4" woofers, 2 tweeters, and 2 crossovers
  • hybrid layered-pulp woofer with rubber surround
  • 1" textile ring-dome tweeter
  • external crossovers — 12 dB per octave (high-pass) and 6 dB per octave (low-pass)
  • 7-level tweeter adjustment
  • power range: 8-100 watts RMS (300 watts peak power)
  • frequency response: 70-27,000 Hz
  • sensitivity: 86 dB
  • top-mount depth: 2-3/16"
  • warranty: 1 year
  • Our 60-day money-back guarantee

Why install component speakers?

A component speaker system gives you the best possible performance from your car audio system. A system consists of separate woofers, tweeters, and crossovers, each designed to cover one specific range of frequencies. As separate components, the woofer can move freely to deliver more powerful performance, while the tweeter can be custom-mounted in a better spot up closer to your ears, revealing a whole new world of detail. Separate crossovers are far superior to the simple filters wired into full-range speakers, so the components work together for smoother, more focused sound.

Hands-on research

What's in the box?

Download owner's manual

  • 2 Woofers
  • 2 Grilles
  • Two 6x8 adapter rings
  • 2 Tweeter plugs (installed in adapter rings)
  • 8 Self-tapping screws (4mm x 30mm)
  • 8 Speed clips
  • 4 Self-tapping screws (4mm x 9mm)
  • Two 1" tweeters with attached 8.25' speaker wires (with bare wire ends) mounted in 2-piece flush mount cup assembly
  • 2 Threaded tweeter rings
  • 2 Plastic surface tweeter mounts
  • 2 Self-adhesive foam rings
  • 2 Self-adhesive foam pads (3-1/2" x 2")
  • 2 Crossovers
  • 4 Self-tapping screws (4mm x 18mm)
  • 4 Flat speed clips
  • Warranty sheet
  • "Important Notice!" sheet

Product Research



Woofers: The Alpine Type-R series component speakers feature woofer cones made of hybrid layered-pulp with mica coating for great bass response. For durability and superior linearity, the woofers have rubber surrounds.

Motor Structure: The High-performance Linear Drive Motor structure features a large magnet that is almost as big as the voice coil diameter. Its dual radial magnet and twin gap, combined with a square, edge-wound voice coil, gives the diaphragm linear movement over a much greater range. This design allows the speaker to be faithful to the input signal even during high excursion, for accurate musical reproduction and deep bass.

Adapter Rings: The SPR-13S component speakers come with a pair of adapter rings. The rings allow you to install the woofers in 6"x8" openings. The tweeter can be mounted in the adapter ring, or mounted separately. The rings have a tweeter plug that can be removed if you choose to mount the tweeter in the adapter ring.


Tweeters: The SPR-13S component speakers are equipped with 1" (25mm) silk ring-dome tweeters for greater detail and bright, crisp highs.

Tweeter Mounting Options: The tweeters come installed in a swiveling flush-mount cup. You can also install the tweeters in a stealth mount when it will be hidden behind a factory grille. The stealth mount can be used as a top mount or a bottom mount.

Tweeter Mounting Dimensions:


Flush Mount

Stealth Mount

Top Mount

Bottom Mount

Mounting Depth




Mounting Height




Cutout Diameter




Frame Diameter


2.813" x 1.714"

2.813" x 1.714"


Two-way Crossovers: The SPR-13S component speakers come with 2-way external crossover networks. The crossover features a 6dB/octave low pass filter for the woofers, and a 12dB/per octave high pass filter for the tweeters.

Tweeter Attenuation: The crossover has a 7-level tweeter adjustment to allow you to precisely tune your high frequencies. Using the supplied jumpers, you can select 0dB (no attenuation), or 6 levels of attenuation: -3dB, -4dB, -5dB, -6dB, -7dB and -8dB.

Input/Output Connections: The crossover features gold-plated screw terminals for the amplifier inputs and the woofer and tweeter outputs. The screw terminals are hidden by the crossover cover.

Crossover Mounting: There are two holes in the base of each crossover for the two mounting screws. Each crossover comes with flat speed clips.

Dimensions: The crossover has the following dimensions: Width=4.525", Height=1.265", Depth=2.864"

Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.

Alpine SPR-13S Reviews

Average Customer Review:

4 reviews
Review this product
Great Gear Giveaway

Submit a review and then enter to win a $350 rewards card


Review this product:

Thanks for taking the time to share your experiences about this product. Please be sure to focus your comments on the product itself. Read our Review Guidelines for more information.

Your email won't be visible. Please use the email address that is associated with your order.
(e.g., JohnD) Your review will be signed using the display name and location
(e.g., Charlottesville, VA)

Click on a star to rate the overall product on a scale of 1-5
1500 characters left
  Attach a YouTube Review
Crutchfield Video Review Guidelines
  • Only submit videos that you made or are authorized to use.
  • Do not submit videos that contain music, video or visuals that are copyrighted and belong to someone else.
  • Please see our Review Guidelines for more information.
500 characters left
500 characters left

Alpine SPR-13S

Written By Phong, Washington on Sunday, February 27, 2011

Crutchfield Customer Review (What's this?)

Bought these along with alpines subwoofer, receiver and amps basically an all alpine setup to replace my factory speakers on my 2006 Civic and I am loving these speakers.

The only things I would complain about these are the tweeters and the Crossovers. The tweeters comes with many setup to help you install them but none of them worked for my car. They either end up too big or two small for the front dash areas where a stock tweeters would go for my car. A little bit of modification is required to get them to fit.

The Crossovers are susceptible to electrical noise. The cross over is made to be zip tied to an electrical harness, you would want to make sure you tie it to something that doesn't emit too much noise or else they'll bleed to this box and you'll hear unwanted sound coming out of your speakers.

Other than those, these speakers rock!

Outstanding Speakers

Written By tim, APO Germany on Tuesday, August 03, 2010

Crutchfield Customer Review (What's this?)

Outstanding sound quality these speakers produce. Great price for great speakers! These speakers are very clear and precise sound producers. Replaced my factory speakers, and these are 100 times better sound quality than the OE speakers. They are ran to a 4-channel amp in which puts them to their full potential.

Good replacement for stock speakers in my Accord

Written By Alan, Edmonton, AB on Thursday, August 13, 2009

I bought theese to replace the stock tweeter and door speakers in my
2006 Honda Accord EX V6 MT.

After some testing and listening to different configurations I decided to stick
with the stock crossover, and simply replace the speakers & tweeters. Note
that this was NOT recommended, but it seemed to give the best sound to me.

Removing the door panel to get at the speaker wasn't too difficult, just
undo 4 screws and prise it away gently. There didn't seem to be any way
to get the stock speaker out without breaking the plastic lugs, but I didn't
really care as I was throwing it away. To mount the door speaker I cut the
lugs off the Crutchfield-supplied plastic mounting ring and screwed it to the
door with three of the included black spring clips (drilled 2 holes in the
plastic mount). Then had to just simply bolt the spaker to the plastic mount.
Not the simplest process, but not too difficult either- and didn't involve any
cutting or drilling of the car door.

For the tweeters, I just removed the tweeter from the plastic mount that it
came in and held it to the stock tweeter cover with zipties and foam- pretty
quick and easy.

I combined this with the Alpine SPR-69C 6"x9" in the back, combination
seems to work really well to me. Sound is much clearer than the mushy
stock speakers, and with good response over a wide spectrum of
frequencies- I'm very pleased!


Written By wanderingmind12, Minneapolis, MN on Sunday, February 10, 2008

I purchased these to complete my system which now consists of: Alpine CDA-9856 head unit, Alpine MRP-F450 4-channel amp (70W RMS x 4) powering Alpine SPR-13S's up front and Alpine SPR-57C's in the back. For bass, I've got a 12" Alpine Type-R sub being powered by the Alpine MRP-M350 amp. The car (2001 Mercury Cougar 2.5L MTX) has got quite a bit of Dynamat Xtreme to aid in SQ and reduce rattles.

The Alpine SPR-13S' are wonderful components! Some speakers are very harsh or bright to the ears. The Alpine's are not. A few descriptive words for these speakers are warm, mellow, organic, soothing and savory. The 7-level tweeter control is a great feature. You can be guaranteed that you'll find the perfect setting. Too much mid-bass can be annoying and can really kill sound quality. Too little mid-bass also kills sound quality. These Alpine's are right in the middle and the mid-bass that these speakers produce is superb.

I highly recommend these speakers for anyone looking for a set of very nice components.

Get everything you’ll need to enjoy your new Alpine SPR-13S

Reduce ambient road noise and your vehicle's "rattles," for better sound inside your car.
You'll need speaker wire to connect your speakers to your amp.
Keep your speakers clean and dry. They compress to fit behind your speakers.
The right tools will help keep your installation simple and clean.
Dynamat 10415 Xtreme Speaker Kit

Dynamat 10415 Xtreme Speaker Kit

Two 10-in. x 10-in. Sheets

Item #: 15410415


Add to Cart
Dynamat 10435 Xtreme Door Kit

Dynamat 10435 Xtreme Door Kit

With four 12" x 36" sheets — covers two doors

Item #: 15410435


Add to Cart
Dynamat SuperLite Tri-Pak

Dynamat SuperLite Tri-Pak

Triple package — 3 sheets, 12 square feet (Model #10612)

Item #: 15410612


Add to Cart
T-Spec 16-gauge Speaker Wire

T-Spec 16-gauge Speaker Wire

Black/white jacket — priced per foot

Item #: 120SW16WB1


Stinger PRO Series Speaker Wire

Stinger PRO Series Speaker Wire

Priced per foot (16 Gauge)

Item #: 541SPW516B


T-Spec 12-gauge Speaker Wire

T-Spec 12-gauge Speaker Wire

Black/white jacket — priced per foot

Item #: 120SW12WB1


XTC 5-1/4

XTC 5-1/4" Speaker Baffles

Protect your speakers (Slim-line: 2-1/2" depth)

Item #: 237XT52


Add to Cart
Metra Crimp Tool and Connectors

Metra Crimp Tool and Connectors

Package contains crimp tool and over 150 pieces

Item #: 120CRIMPKT


Add to Cart
S&G Tool Aid 87615

S&G Tool Aid 87615

Window and Door Clip Removal Tool

Item #: 18187615


S&G Tool Aid 87650

S&G Tool Aid 87650

Door Trim and Panel Removal Tool

Item #: 18187650


Bojo Trim Panel Tools

Bojo Trim Panel Tools

Set of 6 pry tools — helps remove interior and exterior trim and door panels

Item #: 126CR6NGL


Add to Cart
Spec Tools SQR-200a Squeeze Wrench

Spec Tools SQR-200a Squeeze Wrench

Narrow space ratchet kit with 18 sockets

Item #: 180SQR200A


Add to Cart
Skewdriver Pro SPK4042

Skewdriver Pro SPK4042

Ratcheting straight and offset screwdriver set with 40 bits (Skewdriver Pro with ratchet handle, pictured)

Item #: 180SPK4042


Add to Cart
Install Bay 3320

Install Bay 3320

Auto-ranging digital multimeter

Item #: 1203320

Add to Cart
Bojo Trim Panel Tools

Bojo Trim Panel Tools

Set of 6 pry tools — helps remove interior and exterior trim and door panels

Item #: 126CR6LNGL


Add to Cart