About the Alpine SPS-610
Top-tier sound
Top-tier sound
The sonic specialists at Alpine optimize their SPS-610 6-1/2" speakers for great range and impressive tone definition, even at low power levels. You can connect these versatile Type-S Series speakers to your factory stereo for an immediate sonic improvement, or hook them up to a powerful aftermarket stereo or amp for increased performance.
Mineral-fortified polypropylene cones are exceptionally stiff, yet lightweight, which means they can push out accurate bass and deliver clear midrange. Resilient rubber surrounds help keep the woofer centered for accurate cone movement, reducing distortion. Silk dome tweeters bring out all the details in your music.
Grilles are not included; the factory grilles should be suitable for most applications.
Priced per pair
Product highlights:
- 6-1/2" 2-way speakers (pair)
- mineral-fortified polypropylene woofer cone with rubber surround
- 1" silk dome tweeter
- power range: 2-80 watts RMS (240 watts peak power)
- frequency response: 70-22,000 Hz
- sensitivity: 88 dB
- top-mount depth: 2-1/4"
- grilles not included
- warranty: 1 year
- MFR # SPS-610
What's in the box:
- Two 2-Way 6-3/4" Speakers
- Two 6-1/2" Adapter rings (includes GM/Chrysler 6-3/4G size)
- Two 12" Lengths of speaker wire (each has quick-slides on one end and bare wire on the other)
- Eight 1-1/8" Self-tapping screws
- Eight M4x12mm Machine screws
- 8 Speed clips
- Warranty information
- Important Notice sheet
- Template and specs on box
Customer reviews for Alpine SPS-610
Loading...
Loading reviews...
Average review:
4.5 out of 5 starsThanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Alpine SPS-610
Features & specs
General | ||
---|---|---|
Speaker Size | 6 1/2 | |
Design | 2-way | |
Tweeter Design | 1" Dome | |
Impedance (Ohms) | 4 | |
Tweeter Composition | Silk | |
Woofer Composition | Poly-Mica | |
Woofer Surround | Butyl rubber | |
Parts Warranty | 1 Year | |
Labor Warranty | 1 Year | |
Specifications | ||
Sensitivity (1W at 1 meter) | 88 | |
Sensitivity at 2.83 volts | N/A | |
Frequency Response | 70 - 22k Hz | |
Minimum RMS Wattage | 2 | |
Maximum RMS Wattage | 80 | |
Peak Power Handling (Watts) | 240 | |
Top-mount Depth (Inches) | 2 1/4 | |
Bottom-mount Depth (Inches) | 2 9/16 | |
Cutout Diameter or Length (inches) | 5 | |
Mounting Height (Inches) | 0.783 | |
Frame Width | 6.477 | |
Frame Length | 6.477 |
Product Research
Features
Poly-Mica Cone: Each SPS-610 speaker features a Poly-Mica cone and butyl rubber surround. Mica adds strength and heat resistance to polypropylene, resulting in reduced distortion and improved reliability.
Silk Dome Tweeters: Each speaker has a 1" Wide-Range Silk Dome Tweeter for smooth high frequencies. The tweeters also swivel up to 10° so you can optimize them based on your listening position.
Efficient Design: The SPS-610's high-efficiency design allows the speaker to be powered by your factory or aftermarket head unit, resulting in an easy system improvement for many vehicles requiring 6-1/2" or 6-3/4" speakers.
Mounting: Without an adapter, the SPS-610 speakers fit standard 6-3/4" applications. Given their required cutout, they will also fit standard 6-1/2" applications without an adapter, but new screw holes must be drilled. Using the included adapter brackets the SPS-610s can be mounted in a variety of standard 3-hole 6-1/2" applications, Ford 4-hole 6-1/2" applications, and non-standard 6-3/4" applications, without any modification.
No Grilles: No grilles are included with these speakers.
The Alpine SPS-610 replaces these items
Alpine SPS-600
- polypropylene-mica woofer cone with air-injected rubber surround
- 1" silk dome tweeter
- 2-80 watts RMS power range
Alpine SPG-17C2
- pearl-mica injected polypropylene woofer with rubber surround
- 3/4" silk dome tweeter
- 2-60 watts RMS power range
Loading...
Loading accessories...
Customer Q&A
16 questions already asked
Loading...
Loading articles...
Excellent sound for the price. The speakers really need to be powered by an amplifier to perform at their best. When using with the stock head unit there was virtually no base response, but after install an amplifier (45W RMS) they really came to life.
Michael from La Grange, IL