About the Alpine SWR-M100
You'll rock the boat with Alpine's SWR-M100 marine subwoofer — it delivers classic Alpine punch for resonant bass you can hear and feel. A molded polypropylene cone with a Santoprene™ rubber surround provides reliable performance, and you can feed it up to 300 watts RMS from your marine amplifier. The SWR-M100's airflow management system and CRC motor keep it running cool, even in the summer heat.
The SWR-M100 works well in free-air applications — it doesn't need an enclosure to deliver great bass. The high-excursion design gives you high performance, no matter where it's installed. Alpine engineered this subwoofer to stand up to heat and humidity, so you'll enjoy great bass, season after season.
Product highlights:
- 10" 4-ohm marine subwoofer
- molded polypropylene woofer with Santoprene rubber surround
- marine-grade Nomex® spider
- high-strength polypropylene frame and waterproof rubber mounting gasket
- suitable for free-air use
- power handling: 300 watts RMS
- peak power handling: 900 watts
- high-excursion design
- warranty: 1 year
- MFR # SWR-M100
What's in the box:
Alpine SWR-M100 owner's manual
- 10" Marine subwoofer with attached silver grille
- Grille trim ring
- 8 Self-tapping screws
- 8 Speed clips
- Allen wrench
- Application Guide
- Customer Care Registration/Survey
- Warranty sheet
- Important notice sheet
Customer reviews for Alpine SWR-M100
Loading...
Loading reviews...
Average review:
5.0 out of 5 starsThanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Alpine SWR-M100
Product Research
Features
Molded Polypropylene Cone: This Alpine Type-R marine subwoofer has a molded polypropylene cone with a 2-piece structural parabolic design.
HAMRS: The SWR-M100 woofer features a High Amplitude Multi Roll Surround (HAMRS), made of injection-molded Santoprene, that allows for an incredible amount of linear excursion and greater SPL.
Progressive Nomex Spider: This subwoofer has a progressive Nomex spider for added stability and mechanical durability. The custom progressive rolls gives the woofer a longer, more linear stroke with maximum centering and restoring force. Special edge control design and Nomex construction provide excellent tear resistance, strength and long-term reliability.
Tinsel Leads: The woofer features insulated, 16-gauge stranded tinsel leads that are sewn to the spider for added strength and durability.
Frame: The woofer is mounted to a custom, high-strength, 5-leg frame made of injection-molded polypropylene. The woofer is protected by a silver plastic grille, attached to the frame. A rubber mounting gasket helps to seal the woofer into the enclosure.
Hidden Screw Mounting: The 8 supplied mounting screws are inserted through the grille and into the mounting surface. A round grille trim ring fits over the grille to cover the screw holes. This helps protect the hardware from corrosion as well as adds to the cosmetics of the woofer system.
Voice Coil: The woofer has a single 4-layer, 4-ohm voice coil of high-temperature copper wire wound on a TIL former.
Terminals: The terminals are located on one side of the woofer basket, and feature a 2-way design. You can use .205" (+) and .187" (-) female quick slides on your speaker wires, or directly insert the speaker wire, up to 12 gauge, into the terminal and tighten the set screw with the supplied Allen wrench.
Enclosure: The SWR-M100 is designed to work in a sealed enclosure or infinite baffle. The optimum sealed box volume is 4.85 cu/ft.
Loading...
Loading accessories...
Customer Q&A
3 questions already asked
Loading...
Loading articles...
Replaced my factory sub in my Sea Doo Challenger with the Alpine. Great bass and the SPR-M700 are a great compliment to the sub. I would highly recommend this sub. The silver grills look good and seem very durable.
Chuck from Lincoln, NE