1.888.955.6000
 
 
1-888-955-6000
crutchfield.com
Crutchfield

Alpine SWR-T12

Type-R Thin 12" 4-ohm shallow-mount subwoofer

Zoom
  • Alpine SWR-T12

    Front

  • Alpine SWR-T12

  • Alpine SWR-T12

  • Alpine SWR-T12

Crutchfield OMC logo
We don't check this item for fit or compatibility.
 

Our take on the Alpine SWR-T12

by Dominic Devito
Alpine

What's a component sub and why would I want one?

A component sub is simply a speaker that's designed to reproduce bass once it's installed in a compatible enclosure. Think about the impact of a movie soundtrack in a big theater or even in your own home HDTV setup. A component sub can add the same kind of power to the music in your car. And a car sub is not all about the boom that you hear on a street corner (although that's cool too) - you can pair a component sub with your choice of enclosure to get bass just the way you like it, from tight and punchy to fat and loose. And once you experience music in your car with a well-tuned subwoofer, you'll never go back.

Alpine Authorized Online Dealer

What good is a shallow-mount sub if it doesn't move air? Alpine's Type-R Thin subwoofers combine low-profile design with high power handling to pump out powerful bass in your vehicle's hard-to-fit spaces. These shallow subs offer a mounting depth of 3.5 inches, but their cone excursion is nearly as long as that of their regular counterparts — you'll hear deep, satisfying bass from the resulting massive air movement.

Big bass, not much space
The special spider design uses a series of adjacent rolls to get the cone moving without requiring a lot of space, combining with the advanced motor structure that reduces the sub's profile while maintaining accuracy. A dynamic neodymium magnet structure allows the sub to handle more power than the typical shallow-mount sub.

Handles plenty of power
The SWR-T12 12" thin subwoofer handles up to 600 watts RMS for tremendous thump. Its aluminum woofer cone works with the multi-roll Santoprene™ surround for performance that will really surprise you. The finned aluminum heat sink is directly coupled to the frame for rapid heat dissipation that'll keep your sub running cool. Type-R Thin subs present ideal solutions for applications with limited available space, such as pickup trucks and compact cars.

Highlights:

  • 12" 4-ohm shallow-mount subwoofer
  • aluminum cone with Santoprene rubber surround
  • cast aluminum frame with radial finned heat sink
  • frequency response: 26-200 Hz
  • power handling: 300-600 watts RMS
  • peak power: 1,800 watts
  • sensitivity: 84 dB
  • top-mount depth: 3-1/2"
  • warranty: 1 year
  • Our 60-day money-back guarantee

Priced per speaker

Note: Sorry, Crutchfield cannot ship Alpine products to Guam or Puerto Rico.

 

Hands-on research from the Crutchfield Labs (what are the Labs?)

Features and Specs
Size
Loading...
12 -inch
Impedance
Loading...
4 ohms
Cone Material
Loading...
Aluminum
Surround Material
Loading...
Santoprene rubber
Ideal Sealed Box Volume (cubic feet)
Loading...
0.6
Ideal Ported Box Volume (cubic feet)
Loading...
1
Port diameter (inches)
Loading...
N/A
Port length (inches)
Loading...
N/A
Free-Air
Loading...
No
Dual Voice Coil
Loading...
No
Sensitivity
Loading...
84 dB at 1 watt
Frequency Response
Loading...
26 - 200 Hz
RMS Power Range (Watts)
Loading...
300-600
Peak Power Handling (Watts)
Loading...
1800
Top Mount Depth (inches)
Loading...
3 1/2
Bottom Mount Depth (inches)
Loading...
N/A
Cutout Diameter or Length (inches)
Loading...
10 7/8
Vas (liters)
Loading...
33
Fs (Hz)
Loading...
32
Qts
Loading...
0.67
Xmax (millimeters)
Loading...
15
Parts Warranty
Loading...
1 Year
Labor Warranty
Loading...
1 Year
Product Research
What's in the box?

Download owner's manual

  • 12" Thin-mount (4-ohm) subwoofer
  • Rubber trim-ring (installed)
  • Hex-key
  • Application Guide (Eng/Fre)
  • Customer Care Registration Card
  • Limited Warranty Card (US/Canadad)
  • Important Notice! (Eng/Fre)

Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team — they open the box, verify contents, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.

Features
Enclosure Compatibility

Features

Alpine Type-R Thin Subwoofer: The Alpine Type-R Thin subwoofer series combines the low-bass performance and power handling of Alpine's traditional Type-R subwoofers in a thin package optimized for extremely small enclosures. The new Type-R Thin boasts no less than 7 unique Alpine technologies in its industry-first design. These innovations allow the Type-R Thin to have the output and power handling of the traditional Type-R series in less than half the depth. The new Type-R Thin design has the same DNA of the standard Type-Rs; demanding cleaner, deeper bass extension, faster, more accurate transients, and even greater output capability.

Parabolic Aluminum Cone with Force Transfer Assembly: A Heavy-duty magnet assembly calls for heavy-duty cone materials, such as parabolic aluminum cone woofer. This specially engineered aluminum cone is reinforced by an injection-molded force transfer assembly, giving the cone structure outstanding stiffness while minimizing moving mass. A centering ring in the force transfer assembly is also engineered to lock the voice coil assembly in place. This makes the entire piston assembly extremely strong and linear.

FEA Optimized HAMR Surround: The High-Amplitude Multi Roll (HAMR) Surround Design allows for extreme excursions without sacrificing valuable cone area. FEA Optimized for linearity and made with injection-molded Santoprene , the HAMR surround is a key part of the suspension system that provides accurate, distortion-free control at extreme excursions.

1.5lb Neodymium Magnet with 4" Voice-Coil: The Type-R Thin subwoofer's 1.5lb neodymium magnet has 5x the magnetic strength than standard ferrite magnets used for most subwoofers. This powerful magnet combined with a massive 4" (100mm) voice coil delivers increased power handling and more accurate, louder, cleaner bass with even more control.

Segmented Spider Design: You can count on Type-R Thin subwoofer to deliver strong, impactful output like its predecessors. Its Revolutionary Segmented Spider Design provides the Excursion of a tall subwoofer. Most shallow-mount subwoofers have less output than traditional deep subwoofers, since their shallow frame limits how far their cones can move at high power levels. The Type-R Thin subwoofer uses Alpine's patent pending Pass-Through Gap Geometry, allowing the unique Thermoplastic Elastomer Segmented Spider to completely pass through the motor structure. This means the cone and voice coil assembly have the clearance needed for over 50mm of peak-to-peak excursion, allowing for massive output even in such a shallow frame.

FEA Optimized Dual-Sided Machined CRC Motor Structure: An FEA Optimized Dual-Sided Machined CRC Motor Structure creates a symmetrical magnetic field with evenly distributed flux density to greatly reduce distortion, while further improving power handling and output.

Radial Vented VC Heat Sink & Airflow Management System: Alpine's Patented Radial Vented VC Heat Sink and Airflow Management System (helps to minimize power compression and ensures reliable long playing time by actively pulling (or transferring) output-robbing heat away from the Voice Coil.

Cast Aluminum Frame: The new cast aluminum frame is directly coupled to the machined aluminum shorting sleeve assembly. This allows the entire frame to act as a heat sink for sustained power handling, even in the most extreme of applications.

Speaker Terminals: This Alpine Type-R Thin subwoofer features a pair of heavy-duty screw-terminals on one side of the woofer's basket that will accommodate up to 8-gauge speaker wire. A hex-key is provided to adjust the set-screw terminals.

Gasket Cover: Alpine uses a Concealed Mount Gasket System to cover the mounting screws for a clean look. The black rubber gasket ring comes already installed on the woofer and needs to be removed before drilling the mounting screws (not supplied). The gasket ring then snaps back into place once the woofer is mounted.

No Break-in Period: There's no need to play your sub for hours to break it in to achieve consistent performance. This sub is designed to deliver consistent performance right out of the box. Since this revolutionary design is made with an injection mold resin, rather than phenolic stiffened textile, this new spider requires no break-in to achieve ideal performance. A Co-Molded Aluminum collar attaches the voice coil to the spider to ensure a reliable, high-strength design.

Enclosure Compatibility

Thin Mount: The Alpine Type-R Thin series subwoofer has been engineered to offer more installation flexibility and application versatility to build the ideal sound system. At 3-1/2" deep, this 12" sub provides deep bass performance where it normally couldn't fit. And the 0.6 cu/ft ideal sealed enclosure size (or 1.0cu/ft ideal vented enclosure size) means great bass performance can go just about anywhere in your vehicle.

Recommended Sealed Box Volume: The recommended sealed box sizes range from 0.4 cu/ft to 0.75 cu/ft. Within this range, the ideal size is 0.6 cu/ft.

Recommended Vented Box Volume: The recommended vented box sizes range from 1.0 cu/ft to 1.5 cu/ft. Within this range, the ideal size is 1.0 cu/ft. A slot port with the following dimensions should be used: 3.625" (W) x 3.5" (H) x 28.75" (L).

 
Review this product
Great Gear Giveaway rewards card

Submit a review and you will be entered to win a $150 gift card

Crutchfield Great Gear Giveaway Official Sweepstakes Rules

Alpine SWR-T12 Reviews

Average Customer Review:

2 people say:

Review this product:

Thanks for taking the time to share your experiences about this product. Please be sure to focus your comments on the product itself. Read our Review Guidelines for more information.

Your email won't be visible. Please use the email address that is associated with your order.
(e.g., JohnD) Your review will be signed using the display name and location
(e.g., Charlottesville, VA)

Click on a star to rate the overall product on a scale of 1-5
Rate the following specific attributes
  Value
 Sound Quality
 Ease of Use
 "Coolness Factor"
 Build Quality
1500 characters left
Attach a YouTube Review
Crutchfield Video Review Guidelines
  • Only submit videos that you made or are authorized to use.
  • Do not submit videos that contain music, video or visuals that are copyrighted and belong to someone else.
  • Please see our Review Guidelines for more information.
500 characters left
500 characters left
Filter by rating:
5 out of 5

Best shallow mount in the CORRECT box!!

Written By zachz, los angeles, ca on Monday, July 18, 2011
 
I threw one of these in my truck under the seat. I knew it was only one shallow 12 but I wasn't too impressed. Then I realized the box was too small and I put a bigger one in between the front and rear seats. WOW. Even though this is a shallow mount, it still needs about 1 cubic ft of airspace and lots of power and it hits very hard. For a shallow mount, nothing even comes close. There isn't much info on these, and they are pretty expensive but you wont be disappointed.
13 out of 17 people found this helpful
Was this review helpful?    Yes | No
 
5 out of 5

2005 F250 Crew Cab.

Written By JV, Anaheim, CA on Friday, June 03, 2011
 
I installed 2 SWR-T12's behind the back seat of my 2005 F250. These thing sound GREAT!! They are being powered by an Alpine MRX-M100 amplifier with an external bass knob. I wasn't sure what to expect because there isn't much info about them and I couldn't find them on display anywhere. The sound quality is amazing, the bass is LOUD and DEEP! I can't believe that they are shallow mount subs, they remind me of my old JL audio W6 12's. I'm extremely happy with my purchase.
19 out of 21 people found this helpful
Was this review helpful?    Yes | No
 

1 question already asked

Hello, I'm looking at ordering 2 of these shallow mount type r 12's and curious what best alpine amplifier to pair them with would be? Thank you [ Brandon  Mar 25, 2014 ]
1 answer
  • Thanks for your question. For information on selecting the best amp for your subs I would recommend reaching out to an Advisor by phone (1-800-324-9695) or online chat. They will be able to help determine the differences between the amp models and help you make the best choice for your system. [ Krissy Staff  Mar 26, 2014 ]

Add accessories for the Alpine SWR-T12

We've verified that these enclosures are a good match for this subwoofer. See all categories & accessories

Sound Ordnance™ Bass Bunker Single truck-style sealed enclosure for 12" sub (Model BB12-T)
8 people say
Your Price: $59.99

After $20.00 Price Break

Add to Cart
Sound Ordnance™ Bass Bunker Ported dual 12" subwoofer enclosure (Model BB122-125V)
12 people say
Your Price: $79.99
Add to Cart
T-Spec 16-gauge Speaker Wire Black/white jacket — priced per foot
9 people say
Your Price: $0.69
Add to Cart
T-Spec 12-gauge Speaker Wire Black/white jacket — priced per foot
17 people say
Your Price: $1.99
Add to Cart
Stinger PRO Series 16-gauge Speaker Wire Black jacket — priced per foot
37 people say
Your Price: $0.39
Add to Cart
Dynamat 19100 License Frame Kit
11 people say
Your Price: $14.99
Add to Cart
Dynamat Xtreme Trunk Kit 5 sheets, 20 square feet
11 people say
Your Price: $169.99
Add to Cart
Metra Box Carpet Carpet roll (54" x 5 yards) — available in 3 colors (Black)
15 people say
Your Price: $39.99
Add to Cart
Polyester Fiber Stuffing Make your subwoofer think it's in a bigger box (1-pound pack)
31 people say
Your Price: $12.99
Add to Cart
Metra Speaker Terminal Round terminal cup with binding post connectors (for do-it-yourself box builders)
8 people say
Your Price: $9.99
Add to Cart
5 people say
Your Price: $9.99
Add to Cart
2 people say
Your Price: $5.99
Add to Cart
Metra Speaker Terminal Round terminal cup with spring clip connectors (for do-it-yourself box builders)
5 people say
Your Price: $3.99
Add to Cart
Metra Speaker Terminal Square terminal cup with binding post connectors (for do-it-yourself box builders)
5 people say
Your Price: $9.99
Add to Cart
2 people say
Your Price: $9.99
Add to Cart
Metra Speaker Terminal Square terminal cup with spring clip connectors (for do-it-yourself box builders)
5 people say
Your Price: $3.99
Add to Cart
Your Price: $69.95

After $10.00 Price Break

Add to Cart

Why choose SquareTrade?

The #1-Rated Protection Plan

Thousands of people have reviewed SquareTrade Protection Plans — and made us #1.

5-Day Service Guarantee & Free Shipping

We'll repair or replace your item in five business days or less after we've received it, or your plan is free. And, as always, we pay for all shipping.

Protection from Normal, Everyday Use

Repairing your average mechanical or electrical failure can cost as much as buying a new device. With SquareTrade, you're covered — including parts and labor.

3 Year Protection Plan
3 Year Protection Plan
Your Price: $84.99
Add to Cart
4 Year Protection Plan
4 Year Protection Plan
Your Price: $112.99
Add to Cart

For a more in-depth review and enhanced detailed information on the Alpine SWR-T12, please visit the Crutchfield website product page (/ISEO-rccbcspd/p_500SWRT12/Alpine-SWR-T12.html ).