Russound AB-2.2

Tabletop A/B selector

Item #: 543AB22

In Stock

5 Reviews

Your price: $79.00 Earn up to 79 Rewards points

Add to Cart Free Shipping Lifetime Tech Support

+ Add to wishlist + Email me alerts for this product

View all associated offers

The Russound AB-2.2 table-top "A/B" selector comes in handy for two different types of custom audio installations. Use it to safely switch between two different powered audio systems you connect to one pair of in-wall speakers. Or, send music from a single audio system to one of two pairs of connected speakers. Hum along to your favorite music in the kitchen while you cook, then switch to your patio speakers while you enjoy an outdoor meal.

Custom-tailored advice — before and after you buy
Have questions about using this speaker selector in a multi-room setup? Our Audio/Video Designers can help you put together the ideal system — from planning the wire run to picking out speakers. Plus, our tech support specialists can help you through your installation step-by-step.

Product Highlights:

  • table-top speaker or amplifier selector
  • handles up to 150 watts per channel
  • accepts up to 14 gauge speaker wire
  • 5-9/16"W x 2-1/4"H x 3-11/16"D
  • warranty: 10 years
  • Our 60-day money-back guarantee

Hands-on research

What's in the box?

Download owner's manual

  • Dual source selector switch
  • Instruction Manual

Product Research


Overview: The Russound AB-2.2 is a dual-source selector switch that allows a single pair of speakers to be driven by either of two amplifiers, or to allow a single amplifier to drive either of two pairs of speakers. It is a tabletop unit with a push-on, push-off button to switch between the dual amplifier or speaker pairs.

Connections: The AB-2.2 has three removable, color-coded, screwless snap connectors which accept up to 14-gauge wire. These connectors have wire locking levers which snap the speaker wire into place.

Specifications: The AB-2.2 is designed for use with amplifiers with a power output of up to 150 watts RMS per channel.

Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.

Russound AB-2.2 Reviews

Average Customer Review:

5 reviews
Review this product
Great Gear Giveaway

Submit a review and then enter to win a $350 rewards card


Review this product:

Thanks for taking the time to share your experiences about this product. Please be sure to focus your comments on the product itself. Read our Review Guidelines for more information.

Your email won't be visible. Please use the email address that is associated with your order.
(e.g., JohnD) Your review will be signed using the display name and location
(e.g., Charlottesville, VA)

Click on a star to rate the overall product on a scale of 1-5
1500 characters left
  Attach a YouTube Review
Crutchfield Video Review Guidelines
  • Only submit videos that you made or are authorized to use.
  • Do not submit videos that contain music, video or visuals that are copyrighted and belong to someone else.
  • Please see our Review Guidelines for more information.
500 characters left
500 characters left

Decent product but could be a LOT better

Written By Jayne, Long Island, New York on Saturday, March 14, 2015

Crutchfield Customer Review (What's this?)

It works and is small and unobtrusive, but it has these tiny connector block modules for the connections and not binding posts or spring terminals. I used 14 AWG wire and it was a challenge to fit the wire into those connectors and the spacing between conductors is really close. I would have gladly paid more for a more substantial switch that would accept banana plugs or pins. I couldn't find a pic of the back of this unit and now I know why. You can only insert a very short length of stripped wire into the connector block.

Pros: Small Works as it should

Cons: Tiny connector blocks will only allow a very short length of 14 AWG or smaller to be inserted. Should be larger to accommodate real speaker terminals.

Simple but effective device

Written By David, Cincinnati, OH on Monday, October 20, 2014

Crutchfield Customer Review (What's this?)

Needed a way to manage my indoor and outdoor speakers on Zone 2. Wanted to be able to play music in the great room as well as either the lower level or patio and choose based upon whether it was an indoor outdoor gathering or more indoors based upon weather. This basic device provided me with simple A/B switching. Worked as expected.

Pros: Super simple Cost effective

Cons: None

Russound AB-2.2 performs well

Written By KrisN, Washington,IL on Wednesday, January 29, 2014

Crutchfield Customer Review (What's this?)

This product is well built and looks good.I used it to use one pair of speakers with two receivers. So far I have had no issues with deterioration of sound quality or any other sort of problems.The small terminals make it a little difficult to install wires but you just have to strip them to the proper length and be sure there are no stray strands protruding because the terminals are very close together. I'm only giving it 4 stars because I think for the money, it is a little expensive for a simple passive devise like this.

Pros: Smooth switching with just a single button.

Cons: Small wire terminals.Expensive.

Well Designed and Versatile

Written By Jim, Morgantown, PA on Thursday, December 15, 2011

Crutchfield Customer Review (What's this?)

I installed an Onkyo 7.1 home theather AV receiver in a lower level. Tech support at Polk and Crutchfield gave me advice on how to combine four Polk bookshelf speakers I already owned with a Polk center speaker and sub-woofer for a 5.1 system. The set-up sounds great. However I was left with a most beloved NAD Power Envelope Amp, an NAD Pre-Amp Receiver, and two Polk SDA 2A Stero/Dimensional Array speakers.

For a year I listened to the two SDA's powered by zone two of the Onkyo in an upper level living area. During this time the NAD power amp & pre-amp sat unused and unappreciated.

Enter the Russound AB-2.2. This versatile switch (can be used as a switch for two sets of speakers from one source OR to power one set of speakers from two diferent sources) allowed me to maintain the inputs from the home theater (Sat TV/music, BluRay with internet apps like Pandora, CD, etc) and to reconnect my NAD equipment as a second source in my upper level area. Don't get me wrong......I'm not an audio snob... (the Onkyo TX-SR608 is an amazing piece of equipment for the bucks), but I still love the powerful, clean sound the NAD amp kicks out on the SDA's. So now I have the best of both worlds. Thanks again to some great American companies (Crutchfield, Polk, and Russound) for their support and products). Additionally, Onkyo USA has exceptional tech support! Happy Holidays....

Pros: Well designed and well built

Cons: Nothing

Works fine BUT!

Written By Sandy, Connecticut on Tuesday, November 01, 2011

Crutchfield Customer Review (What's this?)

Pros: It allows me to share a pair of tower speakers with two receivers.....a HT Receiver (5.1 setup, 100W/channel) and a Stereo Receiver (2.1 setup, 100W/channel)). A rare but useful product for people who do not wanna listen to music in a HT setup. Build quality acceptable. No need to hide this from plain sight. You can put this on the main cabinet along with your other black boxes. This is why I went with Russound AB-2.2 and not Niles DPS-1. In the picture the Niles DPS-1 looked a bit crude. Overall the product works fine, no issues on that end.

Cons: The speaker inputs are really tiny and it was quite a battle to connect my 14 gauge wires. I recommend using wires which are at least 18 gauge. I didnt wanna purchase another set of wires just to connect this, hence I went with what I had.

The speaker clips are really tiny as well and are extreeemely difficult to work with. Normally, with clips you have to press the clip down and the wire slides in. Here its just the opposite. You have to use your nails (yes thats the only way!!...because they are so tiny) and pull them up (with all your strength) to slide the wire in. Thats why my fingers are hurting even after two days. Ouch!! Hence a 4 star rating.

Pros: It allows me to share a pair of tower speakers with two receivers.....a HT Receiver (5.1 setup) and a Stereo Receiver (2.1 setup). A rare but useful product for people who do not wanna listen to music in a HT setup.

Cons: The speaker inputs are really tiny and it was quite a battle to connect my 14 gauge wires. The wire clips are very difficult to work with.

Get everything you’ll need to enjoy your new Russound AB-2.2

You'll need speaker wire to get the signal to your speakers.
AudioQuest X2 Speaker Cable

AudioQuest X2 Speaker Cable

14-gauge cable, connectors optional (30 feet, Gray)

Item #: 703X230G


Add to Cart
AudioQuest G2 Speaker Cable

AudioQuest G2 Speaker Cable

16-gauge cable, connectors optional (30 feet, Gray)

Item #: 703G230G


Add to Cart
Monster XPHP™ MKII

Monster XPHP™ MKII

Speaker cable with clear jacket (100 feet)

Item #: 119XPHP100


Add to Cart
Monster XP®

Monster XP®

Speaker cable with clear jacket, connectors optional (100 feet)

Item #: 119XPMS1H


Add to Cart
Monster XP® Navajo White MkII

Monster XP® Navajo White MkII

Speaker cable (50 feet)

Item #: 119XPNWS50


Add to Cart
Arista 16-Gauge Speaker Wire

Arista 16-Gauge Speaker Wire

50 feet

Item #: 043185882


Add to Cart

Looking for more? Check out the next model in this lineup.

Russound SDB-2.1 Two Pair

Russound SDB-2.1


In Stock


Add to Cart

Controls two pairs of speakers and powered sources

The Russound SDB-2.1 offers these features:

11-step impedance matching volume control for two pairs of speakers

switch between two powered sources, like an amplifier and receiver

handles 100 watts per channel