Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere.
That's because we have our own in-house Product Research team — they open the box,
verify contents, check the owner's manual, and record dimensions, features and specs.
We stay on top of new products and technologies to help people make informed choices.
Overview: The Russound SS-6.2 Speaker Selector allows you to
switch up to six speaker pairs connected to a stereo amplifier. Each pair of
speakers can be turned on or off through individual front panel switches. It
provides switchable built-in impedance matching, or can be used with impedance
matching volume control. The SS-6.2 is designed for use with 8-ohm loudspeakers.
Impedance Matching Protection: When used with multiple speaker pairs,
the impedance matching circuitry lets you operate the system safely with
automatic overload protection. When connecting more than one pair of 8 ohm
speakers to the speaker selector, the rear panel impedance switch should be
placed in the "In" position. If using impedance matching volume controls (such
LPTx-2), the switch should be in the "Bypass" position.
Amplifier Requirements: When using internal impedance matching (switch
set to "In") a 4-ohm stable amplifier is required. When using external impedance
matching volume controls (switch set to "Bypass"), a 4 to 8 ohm stable amplifier
may be used. You should use only the Amplifier "A" speaker outputs when the
SS-6.2 is used. "B" speaker outputs should not be used.
Connections: The SS-6.2 features spring clip speaker terminals that
can accommodate up to 12-gauge wire. For most applications, stranded 16-gauge
speaker wire is recommended. For runs of over 100 feet, 14-gauge is recommended,
while 12-gauge can be used for runs of up to 200 feet.
Performance: The speaker selector is designed for use with amplifiers
with a power output of up to 100 watts per channel RMS (200 watts per channel peak.
The frequency response is 20Hz to 20kHz (+/- 0dB).
Room Labels: The SS-6.2 comes with a sheet of non-adhesive room labels
which slide into a groove in the front panel. A total of 52 labels and 8 blanks