Skip Navigation

Russound SS-6.2

6-pair speaker selector

1 Review | 1 question - 1 answer

Item #: 543SS62

In Stock

Was: $159.00

Savings: -$40.00

Add to Cart

Ask an expert

Our VA-based experts can help.

1.888.955.6000

ChatEmail

Add to Cart

Russound SS-6.2

Overview

Our take on the Russound SS-6.2

You want tunes playing on the patio, in the living room and kitchen, but not in the bedrooms where people are calling it a day. Now you can have your music right where you want it. The Russound SS-6.2 gives you flexible speaker-switching options for multi-room applications. It allows you to connect as many as six pairs of speakers and play them all simultaneously without damaging your equipment. Create a whole-house system so you can listen to music in every room. Impedance-matching protection circuitry ensures that your amplifier or receiver operates at a safe load.

You want tunes playing on the patio, in the living room and kitchen, but not in the bedrooms where people are calling it a day. Now you can have your music right where you want it. The Russound SS-6.2 gives you flexible speaker-switching options for multi-room applications. It allows you to connect as many as six pairs of speakers and play them all simultaneously without damaging your equipment. Create a whole-house system so you can listen to music in every room. Impedance-matching protection circuitry ensures that your amplifier or receiver operates at a safe load.

Custom-tailored advice — before and after you buy
Have questions about using this speaker selector in a multi-room setup? Our Audio/Video Designers can help you put together the ideal system — from planning the wire run to picking out speakers. Plus, our tech support specialists can help you through your installation step-by-step.

Very easy set up; instructions straight forward and clear. Works very well.

Francis, Bonita Springs, FL

What's in the Box:

  • SS-6.2 speaker selector
  • Instruction Manual
  • Sheet of 52 room labels and 8 blanks

Product Highlights:

  • play up to 6 pairs of speakers simultaneously
  • power handling: 70 watts per channel
  • accepts up to 12-gauge speaker wire
  • includes room/speaker labels
  • 11-1/2"W x 1-13/16"H x 6-1/4"D
  • warranty: 10 years
  • Our 60-day money-back guarantee
Reviews

Russound SS-6.2 Reviews

Average Customer Review:

1 Review

Russound SS-6.2

Written by: Francis from Bonita Springs, FL on October 29, 2012

Crutchfield Customer Review (What's this?)

Very easy set up; instructions straight forward and clear. Works very well.

Pros:

Cons:

Details

Hands-on research

What's in the box?

Download the Russound SS-6.2 manual

  • SS-6.2 speaker selector
  • Instruction Manual
  • Sheet of 52 room labels and 8 blanks

Product Research

Features

Overview: The Russound SS-6.2 Speaker Selector allows you to switch up to six speaker pairs connected to a stereo amplifier. Each pair of speakers can be turned on or off through individual front panel switches. It provides switchable built-in impedance matching, or can be used with impedance matching volume control. The SS-6.2 is designed for use with 8-ohm loudspeakers.

Impedance Matching Protection: When used with multiple speaker pairs, the impedance matching circuitry lets you operate the system safely with automatic overload protection. When connecting more than one pair of 8 ohm speakers to the speaker selector, the rear panel impedance switch should be placed in the "In" position. If using impedance matching volume controls (such as ALTx-2 or LPTx-2), the switch should be in the "Bypass" position.

Amplifier Requirements: When using internal impedance matching (switch set to "In") a 4-ohm stable amplifier is required. When using external impedance matching volume controls (switch set to "Bypass"), a 4 to 8 ohm stable amplifier may be used. You should use only the Amplifier "A" speaker outputs when the SS-6.2 is used. "B" speaker outputs should not be used.

Connections: The SS-6.2 features spring clip speaker terminals that can accommodate up to 12-gauge wire. For most applications, stranded 16-gauge speaker wire is recommended. For runs of over 100 feet, 14-gauge is recommended, while 12-gauge can be used for runs of up to 200 feet.

Performance: The speaker selector is designed for use with amplifiers with a power output of up to 100 watts per channel RMS (200 watts per channel peak. The frequency response is 20Hz to 20kHz (+/- 0dB).

Room Labels: The SS-6.2 comes with a sheet of non-adhesive room labels which slide into a groove in the front panel. A total of 52 labels and 8 blanks are included.

Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.

Accessories
Q & A

Customer Q&A

1 question already asked

Depends on the model. Some allow you to run aux speakers. Regardless, If it has preouts I would get a low cost amp (such as from Emotiva, Mini) and run the speakers off of that. This allows you to control the volume independently and still keep your 7.1; use your L/R preouts. [ Joseph  Dec 17, 2013 ]
Library

Looking for more? Check out the next model in this lineup.

Russound PRO-6 HP Six Pair Speaker Selector with Impedence

More power handling and source switching

The Russound PRO-6HP offers these features:

100 watts per channel

ability to switch between two powered sources, like a separate amp and receiver