Overview: The URC MRF-260 base station is an
"addressable" RF base station for compatible URC Complete Control remotes. RF Addressing gives you the ability to control as
many as 60 identical components throughout a house. To enable better range and
reliability, the MRF-260 is equipped with Narrow Band RF reception. The MRF-260
RF Base Station sits
out-of-sight and receives the radio frequency (RF) commands from your compatible
URC remote. It then translate these signals into commands that your various components can
understand. The benefit to you - no more pointing, because RF passes harmlessly
through walls, doors, and floors. That means that you can store all of your
equipment behind closed doors in cabinet furniture.
URC Remote Compatible: The MRF-260's integrated Narrow Band RF
receiver receives commands from any URC Complete Control remote, such as the
Universal MX-450 Remote Control (554MX450,
Note: The MRF-260 is only compatible with Narrow
Band URC remotes. The current versions of the MX-3000, MX-950, MX-900,
TX-1000, MX-850, MX-650, MX-450, and the MX-350 remote controls. The MRF-260
is compatible with all MX-950s, MX-900s and TX-1000s, but is not
compatible with MX-850, MX-650 or MX-350 remote controls manufactured before
November 1, 2006 or an MX-3000 built before April 2005.You can identify the
build date of a remote control by looking at the serial number. The first 6
digits indicate the build date. If the serial number appears as 122905
014054, the first 6 digits indicate that the remote was built on December
RF Receiver: The MRF-260 receives RF (radio frequency) signals
via its integrated RF receiver and antenna. The MRF-260 displays RF interference
via a bright red Status LED which flickers when interference is present, if the
ID is set to 0. Simply relocate the MRF-260 should interference occur.
Built-in Front Blaster: The MRF-260's built-in Front Blaster sends
commands to components in the same cabinet space as the MRF-260.
4 IR Flashers: Self-adhesive "Flashers" affix to the front panels of
your components (over the built-in IR sensor). The Flashers relay commands to
components out of sight of the MRF-260's Front Blaster. The flashers plug
in to the MRF-260's rear flasher line outputs (3.5mm) via their 9.75' cables.
Uniquely, the MRF-260 can also connect to rear panel IR Inputs (3.5mm) via its
- Dual Fixed IR Outputs: The MRF-260
is equipped with two fixed IR line outputs with standard 3.5 jacks for
standard IR emitter/ flashers.
- Dual Variable IR Outputs: The
MRF-260 is equipped with two adjustable IR line outputs. Each output can be
individually matched to rear panel IR inputs on any component that is
designed to be operated by a standard IR repeater. The outputs utilize a
3.5mm jack and are compatible with standard IR emitter/flashers as well.
Addressable: The MRF-260 has four "addressable" IR Line Outputs. For
example, you can control up to four identical TV's with one MRF-260 or route
volume commands for a specific zone to a particular zone IR input on a
multi-zone preamp. If you have more than four identical components or zones, up
to 15 additional MRF- 260s can be installed to control them (thus allowing up to
60 identical components or zones in one house.
Note: Any compatible URC
Complete Control remote is "addressable." They can be programmed to
specifically control components in a particular room by installing an
MRF-260 base station at each location (up to 15 equipment locations).
In operation it's simple, when you select a device located in the Den, the
remote only sends commands to the Den. When you select a device located in
the Family Room, the remote only sends commands there.
Mounting Options: The MRF-260 features 4 integrated rubber feet that
allow it to sit horizontally on a shelf inside your AV cabinet. The RF base
station also features an integrated mounting bracket and comes supplied with 4
mounting screws to wall-mount the device or mount it to the inside of a cabinet.
Power Supply: The MRF-260 operates off of
standard household AC current using the supplied AC power adapter.
- Input: AC 120V - 60Hz, 9W
- Output: DC 9V - 300mA
Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to
find elsewhere. That's because we have our own in-house Product Research
team. They verify what’s in the box, check the owner's manual, and record
dimensions, features and specs. We stay on top of new products and technologies
to help people make informed choices.