Skip Navigation

Rockford Fosgate P2-2X12

Ported enclosure with two 12" Punch P2 subwoofers

4 Reviews | 4 questions - 4 answers

Item #: 5751P22X12

In Stock

Was: $449.99

Sale: -$140.00

Add to Cart

Ask an expert

Our VA-based experts can help.

1.888.955.6000

ChatEmail

Overview

Our take on the Rockford Fosgate P2-2X12

Standout performance

Rockford Fosgate's P2-2X12 ported enclosure offers the extra power handling of Punch P2 12" subs, so you and your passengers can rock out to powerful bass.

Bulletproof bass

The enclosure houses two Punch P2 12" subs, each with a paper cone that's reinforced with Kevlar fibers and supported by a rubber surround. The heavy-duty motor assemblies and advanced cooling vents allow these subs to handle up to 400 watts RMS each without flinching. The subs are internally wired for a 1-ohm total impedance, so make sure your amp can power this enclosure safely.

Advanced port design

Rugged 5/8" medium-density fiberboard construction means this enclosure will hold strong for fat, heavy bass. Industrial-grade black carpet provides a clean, finished look, and protects your trunk from nicks and scratches. The spring terminals will accept bare wire, pin connectors, or banana plugs. This enclosure uses an advanced port design that promotes generous air movement, while reducing distortion-causing port noise, so you hear louder, deeper bass. Add an amp and some wiring, and feel the thick low end this enclosure adds to your ride.

Absolutely insane subs, they bump so hard it shakes your brain! actually made my rear view mirror fall off my car. would recommend

Matt J, plainfield, IL

What's in the Box:

  • Vented subwoofer enclosure loaded with two Punch P2D4-12 12" Woofers
  • Installation and Operation Instructions

Product Highlights:

  • ported hatchback-style enclosure with two 12" Punch P2 subwoofers
  • 5/8" medium density fiberboard construction covered with black carpet
  • 1-ohm total impedance
  • power handling: 300-800 watts RMS
  • peak power: 1600 watts
  • frequency response: 27-250 Hz
  • sensitivity: 86 dB
  • 33-7/8"W x 15-1/4"H x 16-5/8"D1 x 14"D2
  • warranty: 1 year
  • Our 60-day money-back guarantee
Reviews

Rockford Fosgate P2-2X12 Reviews

Average Customer Review:

4 Reviews

Amazing

Written by: Matt J from plainfield, IL on February 20, 2016

Crutchfield Customer Review (What's this?)

  • "Coolness Factor"
  • Build Quality
  • Ease of Use
  • Sound Quality
  • Value

Absolutely insane subs, they bump so hard it shakes your brain! actually made my rear view mirror fall off my car. would recommend

Pros:

Cons:

Best subs I've owned.

Written by: Kelson C from Tucson, AZ on May 24, 2014

  • "Coolness Factor"
  • Build Quality
  • Ease of Use
  • Sound Quality
  • Value

I have owned a set of kenwoods and the 2 12" Kicker CompR. The Rockfords blow them both out of the water. They have a cleaner sound and don't struggle to hit any high or low. Easily the best subs I've owned.

Pros:

Cons:

Great subs for the price

Written by: K from Utah on July 2, 2013

  • "Coolness Factor"
  • Build Quality
  • Ease of Use
  • Sound Quality
  • Value

These subs hit you in your chest when the bass is up. They hit way hard and look and sound amazining thanks to the ported enclosure. If your thinking about buying these think no longer! Go set off some car alarms with these woofers my friend!

Pros: Loud, clean, hit hard, dope

Cons: None at all!

Rockford Fosgate Rocks

Written by: Josh P. from Hawkins, WI on March 14, 2013

Crutchfield Customer Review (What's this?)

  • "Coolness Factor"
  • Build Quality
  • Ease of Use
  • Sound Quality
  • Value

I am very happy with the amount of bass I can get from these speakers, great buy.

Pros: Great box construction, and great bass.

Cons: Nothing that I can think of.

Details

Hands-on research

What's in the box?

Download the Rockford Fosgate P2-2X12 manual

  • Vented subwoofer enclosure loaded with two Punch P2D4-12 12" Woofers
  • Installation and Operation Instructions

Product Research

Features

Punch Woofer: The enclosure houses two front-firing Rockford Fosgate Punch P2D4-12 12" subwoofers. Both woofers' dual 4-ohm voice coils are internally wired in parallel to present a 1-ohm load. The sub features a StampCast steel frame, a Kevlar fiber reinforced paper cone, and Santoprene surround. An anodized aluminum voice coil former and spider venting help keep the subwoofer cool.

Spider: Dual spiders made from tear and fatigue resistant poly-cotton improve mechanical stability under high excursion, maintaining consistent excursion characteristics.

Solid MDF Construction: The enclosure is constructed of high quality 5/8" MDF (medium-density fiberboard), which resists flexing and has anti-resonant qualities.

Vented Enclosure: The vented enclosure is aided by precision construction through computer design. The enclosure consists of two front firing 12" Punch P2 series subwoofers with a proprietary high-flow, low-noise port. The speaker terminals are located on the left side of the box (when facing the box). The box is covered in black carpet.

Tuned Port: The enclosure uses a front-firing proprietary high-flow, low-noise port to help produce deep and loud bass efficiently.

Box Carpeting: The enclosure is finished with high-density carpeting for superior durability. The carpet is black.

Speaker Terminal: The subwoofer enclosure uses one pair of high current, spring loaded binding posts. The binding posts are located on the left side of the box and will accept pin connectors, single or dual banana plugs, or bare wire up to 10 gauge.

Power Handling: The subwoofer can handle up to 800 watts RMS; 1600 watts peak power.

CEA-2031 Compliant: Power handling on the P2D2-12 subwoofer conforms to CEA-2031 industry standards. This means the subwoofer has the capacity to handle its rated power under continuous demand, not just for an instant.

Dimensions: The depth dimensions listed in Features & Specs include the subwoofer's trim ring, which adds approximately 7/8 of an inch. The depth of just the enclosure is 15-3/4 inches at the base and 13-1/8 inches at the top.

Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.

Accessories
Q & A

Customer Q&A

Crutchfield asked  
Why did you buy this?

I choose this because it appears to be a good quality audio product and has good specs. [ Larry  Feb 10, 2016 ]

4 questions already asked

Assuming the amp is 1 Ohm stable (The woofers are prewired to present a 1 Ohm load to the connected amp), yes. The enclosure is rated to handle up to 800 watts RMS so 750 is very close to their full potential. I hope that helps! My Bio: http://www.crutchfield.com/Support/Bio.aspx?bio=5 [ Ryan  Apr 25, 2016 ]  Staff
Thanks for your question. For information on selecting the best amp for your subs I would recommend reaching out to an Advisor by phone (1-800-324-9695) or online chat. They will be able to help determine the differences between the amp models and help you make the best choice for your system. [ Krissy  Dec 28, 2014 ]  Staff
I forwarded your question to an Advisor and they responded with the following: First, warm up the interior of the car if unit is in a trunk not getting heat use low volume, full range music like trance type dance music or classical. If you would like to discuss further you can contact an Advisor directly by phone (1-800-324-9695) or online chat. [ Krissy  Nov 26, 2014 ]  Staff
We have not received any answers from other customers on your question. I would recommend reaching out to an Advisor by phone (1-800-324-9695) or online chat. They should be able to help answer your question. [ Krissy  Sep 29, 2014 ]  Staff
Library