1.888.955.6000
crutchfield.com
Crutchfield

Rockford Fosgate P2D2-10

Punch P2 10" subwoofer with dual 2-ohm voice coils

Watch video
Zoom
  • Rockford Fosgate P2D2-10

    Front

  • Rockford Fosgate P2D2-10

    Back

  • Rockford Fosgate P2D2-10

    Group

  • Rockford Fosgate P2D2-10

  • Rockford Fosgate P2D2-10

  • Rockford Fosgate P2D2-10

  • Rockford Fosgate P2D2-10

Crutchfield OMC logo
We don't check this item for fit or compatibility.
 

Our take on the Rockford Fosgate P2D2-10

by Jo Greene
Rockford Fosgate

What's a component sub and why would I want one?

A component sub is simply a speaker that's designed to reproduce bass once it's installed in a compatible enclosure. Think about the impact of a movie soundtrack in a big theater or even in your own home HDTV setup. A component sub can add the same kind of power to the music in your car. And a car sub is not all about the boom that you hear on a street corner (although that's cool too) - you can pair a component sub with your choice of enclosure to get bass just the way you like it, from tight and punchy to fat and loose. And once you experience music in your car with a well-tuned subwoofer, you'll never go back.

Standout performance

Rockford Fosgate showcases their fanatical commitment to sonic excellence in the Punch Series of speakers, amps, and subs. If you like to listen to potent, powerful music — and feel it too — Punch components will give you impressive sound that'll stand out in a crowd.

Cutaway view

Bulletproof bass

Engineers at Rockford Fosgate designed the P2D2-10 10" subwoofer to dish out the kind of powerful low end you crave in your ride. Its responsive paper cone is reinforced with the same Kevlar® fibers used in bulletproof vests so you get the best of both worlds — warm bass that's exceptionally hard-hitting. Rockford Fosgate uses a new technique to attach the oversized rubber surround to the cone that increases available cone area up to 25%, so this sub can push more air for even bigger bass.

Made for heavy excursion

This P2 sub features an extended pole piece and bumped backplate that leaves more room for heavy excursion, so it'll hit deeper lows without "bottoming out." Special venting keeps the copper-clad aluminum voice coils cool through heavy use for consistent bass performance over time.

The dual 2-ohm voice coils allow you to wire the sub for 1-ohm impedance to get maximum power output, or for 4-ohm impedance if you're using multiple subs. The P2D2-10 sub works equally well in a sealed or ported enclosure, so you can choose the kind of bass you want for your system.

To drive this single subwoofer, we recommend a mono amplifier rated between 225 and 450 watts RMS at 4 ohms. For more information, please refer to our article on How to Match Subwoofers and Amplifiers.

See more info on this item

Highlights:

  • 10" subwoofer with dual 2-ohm voice coils
  • Kevlar® reinforced paper cone
  • Santoprene surround
  • hybrid StampCast basket provides strength while minimizing weight and resonance
  • power range: 75-300 watts RMS (600 watts peak power)
  • frequency response: 29-250 Hz
  • sensitivity: 84 dB
  • top-mount depth: 5-15/16"
  • sealed box volume: 0.5-0.85 cubic feet
  • ported box volume: 1.4 cubic feet
  • warranty: 1 year
  • Our 60-day money-back guarantee

Hands-on research from the Crutchfield Labs (what are the Labs?)

Features and Specs
Size 10 -inch
Impedance 2 ohms
Cone Material Kevlar reinforced paper
Surround Material Santoprene
Ideal Sealed Box Volume (cubic feet) 0.59
Ideal Ported Box Volume (cubic feet) 1.4
Port diameter (inches) 4
Port length (inches) 14
Free-Air No
Dual Voice Coil Yes
Sensitivity 84 dB at 1 watt
Frequency Response 29 - 250 Hz
RMS Power Range (Watts) 75-300
Peak Power Handling (Watts) 600
Top Mount Depth (inches) 5 15/16
Bottom Mount Depth (inches) N/A
Cutout Diameter or Length (inches) 9
Vas (liters) 35.4
Fs (Hz) 29
Qts 0.5
Xmax (millimeters) 8.5
Parts Warranty 1 Year
Labor Warranty 1 Year
Product Research
What's in the box?

Download owner's manual

  • 10" Dual 2-ohm voice coil subwoofer
  • Trim ring
  • Eight 1-1/8" Allen head screws
  • 4mm Allen head bit
  • Installation/Operation manual (English/ French/ Spanish/ German)

Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team — they open the box, verify contents, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.

Features
Enclosure Compatibility

Features

Overview: The Rockford Fosgate Punch P2D2-10 is a 10-inch subwoofer with dual 2Ω voice coils. The sub features a StampCast steel frame, quick-release compression terminals, a Kevlar fiber reinforced paper cone, and Santoprene surround. An anodized aluminum voice coil former and spider venting help keep the subwoofer cool.

Dual 2Ω Voice Coils: The dual 2Ω voice coils offer wiring flexibility; when wired in parallel the woofer presents a 1Ω load, when wired in series the woofer presents a 4Ω load.

Steel Basket: The P2D2-10 subwoofer features a StampCast steel basket for added rigidity.

Compression Terminals: The P2D2-10 features spring post terminals which accommodate speaker wire up to 10 gauge.

CEA-2031 Compliant: Power handling on the P2D2-10 subwoofer conforms to CEA-2031 industry standards. This means the subwoofer has the capacity to handle power under continuous demand, not instantaneous power handling, that over time, can damage voice coils.

FlexFit Basket: The Flex Fit frame utilizes slots (where possible) instead of single screw sized holes; allowing slight adjustment of the speaker when mounted.

Trim Ring: To improve the cosmetic look, a decorative trim ring is included that mounts over the flange of the woofer. When using the cast aluminum trim ring the woofer is first mounted with four screws, then the ring is placed on top of the woofer, aligning the final four holes of the woofer with ring. The other four screws are used for these holes to mount the ring and woofer to the enclosure. Without the trim ring the mounting height of the woofer is 7/8 of an inch.

Enclosure Compatibility

Sealed Box: Rockford recommends a sealed enclosure with an optimum internal volume of 0.59 cubic feet (from 0.5 to 0.85 cubic feet is acceptable). Sealed enclosures provide the most control over a woofer, will handle a lot of power, and provide accurate sonic reproduction, making them suitable to all types of music.

Ported Box: Rockford recommends a ported enclosure with an internal volume of 1.4 cubic feet using one 4" diameter x 14" long port; this yields a tuning frequency of 40 Hz. Ported (or vented) enclosures typically provide better overall efficiency than sealed so they are suitable for use with smaller amplifiers, giving you more bass output from less power. However, this efficiency comes at the expense of very low frequency output (below 32 Hz).

 
Review this product
Great Gear Giveaway rewards card

Submit a review and then enter to win a $500 rewards card

Rockford Fosgate P2D2-10 Reviews

Average Customer Review:

1 people say:

Review this product:

Thanks for taking the time to share your experiences about this product. Please be sure to focus your comments on the product itself. Read our Review Guidelines for more information.

Your email won't be visible. Please use the email address that is associated with your order.
(e.g., JohnD) Your review will be signed using the display name and location
(e.g., Charlottesville, VA)

Click on a star to rate the overall product on a scale of 1-5
Rate the following specific attributes
  Value
 Sound Quality
 Ease of Use
 "Coolness Factor"
 Build Quality
1500 characters left
Attach a YouTube Review
Crutchfield Video Review Guidelines
  • Only submit videos that you made or are authorized to use.
  • Do not submit videos that contain music, video or visuals that are copyrighted and belong to someone else.
  • Please see our Review Guidelines for more information.
500 characters left
500 characters left
Filter by rating:
5 out of 5

Subs

Written By Rusty, Tennessee on Tuesday, May 27, 2014
Crutchfield Customer Review (What's this?)
 
Works great
Pros:
Hits hard
Cons:
Big
Was this review helpful?    Yes | No
"Coolness Factor"
Build Quality
Ease of Use
Sound Quality
Value
 

Add accessories for the Rockford Fosgate P2D2-10

We've verified that these enclosures are a good match for this subwoofer. See all categories & accessories

Sound Ordnance™ Bass Bunker Ported single 10" subwoofer enclosure (Model BB10-125V)
9 people say
Your Price: $79.99
Add to Cart
Sound Ordnance™ Bass Bunker Sealed dual 10" subwoofer enclosure (Model BB102-75S)
18 people say
Your Price: $79.99
Add to Cart
Sound Ordnance™ Bass Bunker Sealed single 10" subwoofer enclosure (Model BB10-75S)
14 people say
Your Price: $59.99
Add to Cart
Sound Ordnance™ Bass Bunker Ported dual 10" subwoofer enclosure (Model BB102-125V)
28 people say
Your Price: $79.99
Add to Cart
T-Spec 16-gauge Speaker Wire Black/white jacket — priced per foot
13 people say
Your Price: $0.69
Add to Cart
T-Spec 12-gauge Speaker Wire Black/white jacket — priced per foot
29 people say
Your Price: $1.99
Add to Cart
Stinger PRO Series Speaker Wire Priced per foot (16 Gauge, Black)
49 people say
Your Price: $0.39
Add to Cart
Dynamat Xtreme Wedge Pack 1 sheet, 4 square feet
7 people say
Your Price: $39.99
Add to Cart
Dynamat SuperLite Tri-Pak Triple package — 3 sheets, 12 square feet (Model #10612)
17 people say
Your Price: $69.99
Add to Cart
Dynamat 19100 License Frame Kit
15 people say
Your Price: $14.99
Add to Cart
Dynamat Xtreme Trunk Kit 5 sheets, 20 square feet
13 people say
Your Price: $169.99
Add to Cart
Dynamat Dynaliner One 54" x 32" sheet (1/8" thick)
6 people say
Your Price: $69.99
Add to Cart
Rockford Fosgate P2P3G-10 Grille for 10" Punch P2 and P3 subwoofers
2 people say
Your Price: $19.99
Add to Cart
Polyester Fiber Stuffing Make your subwoofer think it's in a bigger box (1-pound pack)
35 people say
Your Price: $12.99
Add to Cart
Metra Speaker Terminal Round terminal cup with binding post connectors (for do-it-yourself box builders)
13 people say
Your Price: $9.99
Add to Cart
Metra Box Carpet Carpet roll (54" x 5 yards) — available in 3 colors (Black)
24 people say
Your Price: $39.99
Add to Cart
5 people say
Your Price: $9.99
Add to Cart
Metra Speaker Terminal Round terminal cup with spring clip connectors (for do-it-yourself box builders)
6 people say
Your Price: $3.99
Add to Cart
4 people say
Your Price: $5.99
Add to Cart
Metra Speaker Terminal Square terminal cup with binding post connectors (for do-it-yourself box builders)
7 people say
Your Price: $9.99
Add to Cart
2 people say
Your Price: $9.99
Add to Cart
Metra Speaker Terminal Square terminal cup with spring clip connectors (for do-it-yourself box builders)
7 people say
Your Price: $3.99
Add to Cart
Port Tube 4" diameter, 4-1/2" long
1 person says
Your Price: $5.99
Add to Cart

Why choose SquareTrade?

The #1-Rated Protection Plan

Thousands of people have reviewed SquareTrade Protection Plans — and made us #1.

5-Day Service Guarantee & Free Shipping

We'll repair or replace your item in five business days or less after we've received it, or your plan is free. And, as always, we pay for all shipping.

Protection from Normal, Everyday Use

Repairing your average mechanical or electrical failure can cost as much as buying a new device. With SquareTrade, you're covered — including parts and labor.

3 Year Protection Plan
3 Year Protection Plan
Your Price: $26.99
Add to Cart

For a more in-depth review and enhanced detailed information on the Rockford Fosgate P2D2-10, please visit the Crutchfield website product page (/ISEO-rccbcspd/p_5751P2D210/Rockford-Fosgate-P2D2-10.html ).