1-888-955-6000
crutchfield.com
Crutchfield

Rockford Fosgate P3-1X10

Punch P3 ported enclosure with 10" sub

Zoom
  • Rockford Fosgate P3-1X10

    Front

  • Rockford Fosgate P3-1X10

  • Rockford Fosgate P3-1X10

  • Rockford Fosgate P3-1X10

Crutchfield OMC logo
We don't check this item for fit or compatibility.
 

Our take on the Rockford Fosgate P3-1X10

by Jo Greene
Rockford Fosgate

Enclosed Subwoofers 101

An enclosed subwoofer is a box with a subwoofer already installed. The advantage to buying an enclosed sub is that the manufacturer made the sub, then designed and built the box as a perfect match, so you'll get the best possible performance. Every enclosed sub has a maximum RMS power handling rating, so pair it with an amp with a similar RMS power rating to get the best performance.

Standout performance

Rockford Fosgate's P3-1X10 ported enclosure offers the extra power handling and advanced heat dissipation of a Punch P3 10" sub, so you'll hear impressive, crowd-drawing bass that just won't quit.

Heat-sink aluminum cone

The enclosure houses a Punch P3 10" sub, with a rigid anodized aluminum cone that holds its shape through heavy play, while staying light and responsive. The aluminum cone acts as a giant heat sink, and works alongside advanced cooling vents to direct heat away from the copper-clad aluminum voice coils. These innovative cooling techniques, plus a heavy-duty motor assembly, let this sub handle up to 500 watts RMS. The sub's dual voice coils are wired for a 1-ohm total impedance, so make sure your amp can power this enclosure safely.

Advanced port design

Rugged 5/8" medium-density fiberboard construction means this enclosure will hold strong for fat, heavy bass. Industrial-grade black carpet provides a clean, finished look, and protects your trunk from nicks and scratches. The spring terminals will accept bare wire, pin connectors, or banana plugs. This enclosure uses an advanced port design that promotes generous air movement, while reducing distortion-causing port noise, so you hear louder, deeper bass. Add an amp and some wiring, and feel the thick low end this enclosure adds to your ride.

See more info on this item

Highlights:

  • ported hatchback-style enclosure with one 10" Punch P3 subwoofer
  • 5/8" medium density fiberboard construction covered with black carpet
  • 1-ohm total impedance
  • power handling: 250-500 watts RMS (1000 watts peak power)
  • frequency response: 27-250 Hz
  • sensitivity: 82 dB
  • 17"W x 13-1/8"H x 16"D1 x 13-3/4"D2
  • warranty: 1 year
  • Our 60-day money-back guarantee

Hands-on research from the Crutchfield Labs (what are the Labs?)

Features and Specs
General
Woofer Size (inches)
Loading...
10
Woofer Material
Loading...
Anodized Aluminum
Enclosure Type
Loading...
Ported
Color
Loading...
Black
Pieces in System
Loading...
1
Width (inches)
Loading...
17
Height (inches)
Loading...
13-1/8
Depth (inches)
Loading...
16
Second Depth (inches)
Loading...
13-3/4
Connector Type
Loading...
Spring post
Frequency Response
Loading...
27-250 Hz
Power Range (Watts RMS)
Loading...
250-500
Maximum Wattage
Loading...
1000
Sensitivity
Loading...
82 dB
Impedance
Loading...
1 ohms
Parts Warranty
Loading...
1 Year
Labor Warranty
Loading...
1 Year
Product Research
What's in the box?

Download owner's manual

  • Vented subwoofer enclosure loaded with one Punch P3D2-10 10" Woofer
  • Installation and Operation Instructions

Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team — they open the box, verify contents, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.

Features

Punch Woofer: The enclosure houses one front-firing Rockford Fosgate Punch P3D2-10 10" subwoofer. The dual 2-ohm voice coils are internally wired in parallel to present a 1-ohm load. The sub features a hybrid StampCast basket, an Anodized aluminum cone, and Santoprene surround. An anodized aluminum voice coil former and spider venting help keep the subwoofer cool.

Spider: Dual spiders made from tear and fatigue resistant poly-cotton improve mechanical stability under high excursion, maintaining consistent excursion characteristics.

Solid MDF Construction: The enclosure is constructed of high quality 5/8" MDF (medium-density fiberboard), which resists flexing and has anti-resonant qualities.

Vented Enclosure: The vented enclosure is aided by precision construction through computer design. The enclosure consists of one front firing 10" Punch P3 series subwoofer with a proprietary high-flow, low-noise port. The speaker terminals are located on the left side of the box (when facing the box). The box is covered in black carpet.

Tuned Port: The enclosure uses a front-firing proprietary high-flow, low-noise port to help produce deep and loud bass efficiently.

Box Carpeting: The enclosure is finished with high-density carpeting for superior durability. The carpet is black.

Speaker Terminal: The subwoofer enclosure uses one pair of high current, spring loaded binding posts. The binding posts are located on the left side of the box and will accept pin connectors, single or dual banana plugs, or bare wire up to 10 gauge.

Power Handling: The subwoofer can handle up to 500 watts RMS; 1000 watts peak power.

CEA-2031 Compliant: Power handling on the P3D2-10 subwoofer conforms to CEA-2031 industry standards. This means the subwoofer has the capacity to handle its rated power under continuous demand, not just for an instant.

Dimensions: The depth dimensions listed in Features & Specs include the subwoofer's trim ring, which adds approximately 7/8 of an inch. The depth of just the enclosure is 15-1/8 inches at the base and 12-7/8 inches at the top.

 
Be the first to review this product
Great Gear Giveaway rewards card

Submit a review and then enter to win a $500 rewards card

Review this product:

Thanks for taking the time to share your experiences about this product. Please be sure to focus your comments on the product itself. Read our Review Guidelines for more information.

Your email won't be visible. Please use the email address that is associated with your order.
(e.g., JohnD) Your review will be signed using the display name and location
(e.g., Charlottesville, VA)

Click on a star to rate the overall product on a scale of 1-5
Rate the following specific attributes
  Value
 Sound Quality
 Ease of Use
 "Coolness Factor"
 Build Quality
1500 characters left
Attach a YouTube Review
Crutchfield Video Review Guidelines
  • Only submit videos that you made or are authorized to use.
  • Do not submit videos that contain music, video or visuals that are copyrighted and belong to someone else.
  • Please see our Review Guidelines for more information.
500 characters left
500 characters left

Add accessories for the Rockford Fosgate P3-1X10

It's critical to have good wire, and none is included with the sub. See all categories & accessories

T-Spec 16-gauge Speaker Wire Black/white jacket — priced per foot
11 people say
Your Price: $0.69
Add to Cart
T-Spec 12-gauge Speaker Wire Black/white jacket — priced per foot
27 people say
Your Price: $1.99
Add to Cart
Stinger PRO Series 16-gauge Speaker Wire Black jacket — priced per foot
45 people say
Your Price: $0.39
Add to Cart
Dynamat Xtreme Wedge Pack 1 sheet, 4 square feet
6 people say
Your Price: $39.99
Add to Cart
Dynamat SuperLite Tri-Pak Triple package — 3 sheets, 12 square feet (Model #10612)
17 people say
Your Price: $69.99
Add to Cart
Dynamat 19100 License Frame Kit
15 people say
Your Price: $14.99
Add to Cart
Dynamat Xtreme Trunk Kit 5 sheets, 20 square feet
12 people say
Your Price: $169.99
Add to Cart
Dynamat Dynaliner One 54" x 32" sheet (1/8" thick)
6 people say
Your Price: $69.99
Add to Cart
Rockford Fosgate P2P3G-10 Grille for 10" Punch P2 and P3 subwoofers
1 person says
Your Price: $19.99
Add to Cart
5 people say
Your Price: $7.99
Add to Cart
Your Price: $69.95

After $10.00 Price Break

Add to Cart

Why choose SquareTrade?

The #1-Rated Protection Plan

Thousands of people have reviewed SquareTrade Protection Plans — and made us #1.

5-Day Service Guarantee & Free Shipping

We'll repair or replace your item in five business days or less after we've received it, or your plan is free. And, as always, we pay for all shipping.

Protection from Normal, Everyday Use

Repairing your average mechanical or electrical failure can cost as much as buying a new device. With SquareTrade, you're covered — including parts and labor.

3 Year Protection Plan
3 Year Protection Plan
Your Price: $41.99
Add to Cart

For a more in-depth review and enhanced detailed information on the Rockford Fosgate P3-1X10, please visit the Crutchfield website product page (/ISEO-rccbcspd/p_5751P31X10/Rockford-Fosgate-P3-1X10.html ).