Chat
Contact us
Close contact box
Connect ID #
392 168 797 4
Connect ID #
392 168 797 4
Don't wait on hold. We'll call you back when it's your turn to talk with the next available .
Please enter your name  
Please enter your phone number  
Please enter a message  

Calls may be recorded for training and quality control purposes.

We are located in Virginia USA.

Thank you. We will be calling you .
We're sorry. We have encountered a problem.

Rockford Fosgate RFKHD9813 Installation Kit Install Rockford Fosgate compact Power and Punch amplifiers in select 1998-2013 Harley-Davidson motorcycles

Item # 575HD9813

Find what Fits your vehicle

Remove

Checking fit...

1 question - 1 answer

Item # 575HD9813

About the Rockford Fosgate RFKHD9813 Installation Kit

Bob Bihlmayer

Amp up your Harley

The RKFHD9813 kit allows you to install a Rockford Fosgate Power or Punch Series compact-chassis amplifier in select 1998-2013 Harleys. The kit includes everything you need to install your new amp, from wiring harnesses right down to the screws. Add some good speakers and you'll be ready to rock!

  • install a Rockford Fosgate compact-chassis amplifier in select 1998-2013 Harleys
  • everything you need to install your new amp
  • warranty: 2 years
  • MFR # RFKHD9813

What's in the box:

  • Amp mounting plate for select Harley-Davidson motorcycles
  • Type 1 bracket (large)
  • Type 2 bracket (small)
  • 76" 8-gauge Power/ground harness with in-line 60A MAXI fuse and fuse holder
  • 9.5' Rear Input/Output harness
  • 32" Front output harness
  • 18" Front input harness
  • 4 Flat-head screws (requires 2mm Allen wrench)
  • 4 Pan-head screws (requires T-10 Torx wrench)
  • Two 3/4" threaded pins (requires 2mm Allen wrench)
  • Installation and Operation Manual

Scratch & Dent items may be missing non-essential accessories. In some cases the manufacturer's accessories have been replaced with generic equivalents.

See the difference between "Open Box" and "Scratch & Dent" Outlet items

Customer reviews for Rockford Fosgate RFKHD9813 Installation Kit

Loading reviews...

Average review:

3.5 out of 5 stars
3 reviews

Thanks for submitting your review

Filter by rating

Customer photos

Customer provided image, click to load a larger version.
Customer provided image, click to load a larger version.

Sort reviews

Sort by:
Items per page:
View page:

Verified customer (What's this?)
Verified employee review (What's this?)

Reviewed on Samsung.com

This review was collected as part of a promotion

Pros:

Cons:

Crutchfield response
Customer provided image, click to load a larger version.
<< >>

More details on the Rockford Fosgate RFKHD9813 Installation Kit

Mark G.

Product Research

Features

Overview: The Rockford Fosgate RFKHD9813 is an amplifier installation kit, designed to add a Rockford Fosgate compact chassis amplifier onto a 1998-2013 Harley Davidson motorcycle. The kit contains a mounting plate, power, signal, and speaker wiring.

Compatible Amplifiers: The installation kit is specifically designed for RF's compact chassis amplifiers. This includes the following models: PBR300X2, PBR300X4, T400X2ad, TM400X2ad, and TM400X4ad. Threaded mounting screw holes on the included mounting plate are marked for specific mounting locations of the two- and four-channel Punch or Power Series amps. The hardware for mounting the amplifier is also included.

Compatible Motorcycles: The kit will mount and wire the amplifier in 1998 to 2013 Ultra Classic, Electra Glide, Street Glide, Tri Glide, Road Glide, and Road Glide Ultra models. (May not be compatible with CVO and Screaming Eagle models.)

Kit Contents: The RFKHD9813 amp installation kit contains the following:

  • Mounting plate/Brackets: The mounting plate is designed to hold the amplifier, and provide an additional heatsink to cool the amp. A large bracket (labeled Type 1) is used on Road Glide and Road Glide Ultra models, and mounts to the clutch-side turn signal bracket. A smaller bracket (Type 2) is to be used on Ultra Glide, Electra Glide, and Tri Glide motorcycle fairings, and mounts the amp to the top of the factory radio. (It does not work on models with the Communication Module.) Hardware is included for mounting the brackets to the plate.
  • Power and Ground Harness: This harness has 8-gauge power and ground wire terminated into a Molex plug that directly connects to the amplifier. The other ends of the cables have ring terminals to connect the wiring directly to the battery. The power wire has an in-line fuse holder with a 60A MAXI fuse. The power wires are cut to length: Power wire is 74", while the Ground wire is 53".
  • Front Speaker Input Harness: This pre-terminated, 18" harness has a 4-pin Molex plug that connects directly to the amp's front input socket, and to the factory front speaker wire harness.
  • Front Speaker Output Harness: This 32" pre-terminated 16-gauge speaker output harness has a 4-pin Molex plug that connects directly to the amp's front output socket, and female quick slides that connect to the motorcycle's front speakers.
  • Rear Speaker Output/Input Harness: The longest harness in the kit (at 9.5 feet) contains both the input and output connectors for the rear channels. This harness is used only when installing a 4-channel amplifier. The input connector is a 4-pin Molex plug that plugs into the amp's rear input socket. Female quick slides connect to the factory stereo's rear speaker wire harness, and to the factory rear speakers. The input wires are color coded purple and green, while the output wires are silver and bronze, and labeled for connecting to the clutch-side and brake-side rear speakers.

Loading accessories...

Customer Q&A

1 question already asked

Q
How do i wire 4 speakers and a woffer to this amp ??
tracy  Sep 08, 2017
1 answer
A
This is not an amplifier; it's the mounting bracket and wiring for compatible Rockford Fosgate compact chassis series amps: http://www.crutchfield.com/p_575T400X2A/item.html http://www.crutchfield.com/p_575TM400X2/item.html & http://www.crutchfield.com/p_575TM400X4/item.html
ryan  Sep 11, 2017 (Staff)

Loading articles...

Compare the sound