1.888.955.6000
crutchfield.com
Crutchfield

Rockford Fosgate Punch P1000X5D

5-channel car amplifier — 75 watts RMS x 4 at 4 ohms + 500 watts RMS x 1 at 2 ohms

Zoom
  • Rockford Fosgate Punch P1000X5D

    Front

  • Rockford Fosgate Punch P1000X5D

    Back

  • Rockford Fosgate Punch P1000X5D

  • Rockford Fosgate Punch P1000X5D

Crutchfield OMC logo
We don't check this item for fit or compatibility.
Item #: 575P1000X5
 
DISCONTINUED
 
This item is no longer available to purchase.
 
Contact us for other options
 
Call   Email  
 
Original price $699.99
We recommend this similar item, or shop all All Car Amplifiers
 
 
 
 
 

Our take on the Rockford Fosgate Punch P1000X5D

by Buck Pomerantz
Rockford Fosgate

My system has plenty of power. Who needs an amp?

You might think you don't need an amp because you have a 400-watt system in your car, or because your new stereo puts out 50 watts a channel. But those are peak wattage ratings, which may boil down to 15 or 20 watts per channel, using the more realistic RMS rating. An amp sends your speakers the power they need to deliver your music with clarity and impact, whether you're using factory speakers or high-performance components. And low-frequency reproduction requires lots of power, so an amp is an absolute must if you're adding a sub to your system.

Heat is the enemy of all amplifiers — sucking power away from your music and damaging internal components over time. Rockford Fosgate came up with some clever innovations that keep these Class D Punch amplifiers running cool, improving efficiency and reducing their size so they can fit in almost any vehicle.

One compact amp for your whole system
The 5-channel Punch P1000X5D amplifier sends 75 watts RMS to each of your front and rear speakers and up to 500 watts RMS to your subwoofer, giving you the crystal-clear power you need to hear and feel the full impact of your music. Separate front, rear, and subwoofer frequency filters give you razor-sharp control over your music's clarity, while the onboard Punch EQ bass boost allows you to reinforce your music's low end even more.

Read more

Small and cool
This versatile amp utilizes full-range Class D amp technology, drawing much less current from your car's electrical system than traditional amps, running cooler and generating tons of power from a remarkably compact chassis. Rockford Fosgate builds this amp using precision components assembled by high-speed, super-accurate robots — this Discrete Surface Mount system results in less interference between parts, lower operating temperature, and increased life for the amplifier. An amplifier that's built to last, packed with power, and fits almost anywhere — what more could you want for your music?

Highlights:

  • 5-channel car amplifier
  • 75 watts RMS x 4 at 4 ohms + 200 watts RMS x 1 at 4 ohms
  • 125 watts RMS x 4 at 2 ohms + 500 watts RMS at 2 ohms
  • 250 watts RMS x 2 bridged at 4 ohms + 500 watts RMS x 1 at 2 ohms
  • CEA-2006 compliant
  • separate variable high-pass filters (50-500 Hz, 12 dB/octave) for front and rear channels
  • variable low-pass filter (50-500 Hz, 12 dB/octave) for subwoofer channel
  • variable bass boost (0-18 dB at 45 Hz) and for subwoofer channel
  • switchable subsonic filter (25 Hz, 24 dB/octave) and phase switch for subwoofer channel
  • full-range Class-D amplifier design
  • Discrete Surface Mount construction
  • 4-gauge power and ground leads and an 100-amp fuse recommended — wiring and hardware not included with amplifier
  • no onboard fuses — when installing multiple amps in a system, an additional 100-amp in-line fuse between the distribution block and the amplifier is recommended
  • 11-15/16"W x 2-1/4"H x 8-3/8D
  • warranty: 1 year
  • Our 60-day money-back guarantee

Hands-on research from the Crutchfield Labs (what are the Labs?)

Features and Specs
Performance
RMS Power Output (Watts x Channels) 75 x 4
200 x 1
Peak Power Output (Watts x Channels) ---
Power at 2 Ohms (Watts x Channels) 125 x 4
Bridged Power (Watts x Channels) 250 x 2
Minimum Impedance Bridged 4
Minimum Impedance Unbridged 2
Best Frequency Response 20-20000 Hz
THD at Rated RMS Power 1%
Signal to Noise Ratio 85 dB
Input Voltage 14.4v
Features
Amplifier Class D
Low-Pass Crossover Frequency 50-500 Hz
Low-Pass Slope (dB/octave) 12 dB/oct
High-Pass Crossover Frequency 50-500 Hz
High-Pass Slope (dB/octave) 12 dB/oct
Bass Boost 0-18 dB
Bass Boost Frequency 45 Hz
Fan Cooled No
Fuse Rating 100A
Speaker Level Inputs No
Preamp Outputs No
Width (inches) 11-15/16
Height (inches) 2-1/4
Depth (inches) 8-3/8
Parts Warranty 1 Year
Labor Warranty 1 Year
Product Research
What's in the box?

Download owner's manual

  • 5-Channel amplifier
  • Four 1-1/2" Self-tapping screws
  • 4mm Allen wrench
  • 2mm Allen wrench
  • Installation & Operation manual (Eng/ Fren/ Span/ Ger/ Ita)

Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team — they open the box, verify contents, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.

Features
Controls
Connections

Features

Overview: The Rockford Fosgate P1000X5D is a Full Range Class-D 5-channel amplifier with 4 full-range channels plus a dedicated subwoofer channel. Class-D amplifiers are very efficient, which reduces current consumption from the vehicle's charging system.

CEA-2006 Compliant: CEA-2006 is a system of testing and measurement methods for mobile audio amplifiers. This voluntary standard advocates a uniform method for determining an amplifier's RMS power output and signal-to-noise ratio. The criteria for measuring power uses a DC input voltage of 14.4 volts and the RMS power output is measured into a 4-ohm load with 1% or less Total Harmonic Distortion plus noise (THD+N). Signal-to-Noise ratio is measured in weighted absolute decibels (dBA) at a reference of 1 watt into 4 ohms. CEA-2006 allows consumers to compare car amplifiers and receivers on an equal basis. Following the CEA-2006 criteria, the P1000X5D is rated at 75 Watts RMS x 4 channels + 200 x 1 channel with an 85dBA signal to noise ratio for the front/rear channels and 75dBA for the subwoofer channel. The signal to noise ratio at the rated power output is 105dB F/R and 95dB Sub.

Note: The amplifier's power output is 125 watts x 4 + 500 watts x 1 at 2 ohms.

Cast Aluminum Heatsink: The cast aluminum heatsink dissipates heat generated by the amplifier's circuitry. The inherent advantage of casting provides a 30% improvement of cooling over conventional extrusion heatsink designs.

DSM (Discrete Surface Mount): In the manufacturing process high speed robotics are used to place 1% tolerance parts and large board traces. DSM improves the efficiency of the circuit, decreases cross-talk from other discrete components and lowers operating temperature.

Power and Protection LEDs: Power and Protection LEDs are located on top of the amplifier. The Power LED glows red when the amplifier is turned on. The Protect LED illuminates yellow if a short circuit or too low an impedance is detected at the speaker connections. When any of the protection circuits engage, the amp automatically shuts down until the problem is corrected.

Punch EQ2: The Punch EQ2 on-board equalization circuit helps correct for acoustical deficiencies in the listening environment. The Gyrator-based Punch EQ control is a narrow band adjustment, variable from 0dB to +18dB at 45Hz, that eliminates frequency shift with boost. The Punch EQ2 operates for the subwoofer channel only.

Note: If the optional PEQ Remote Punch EQ is connected to the amplifier, it will override the built-in Punch EQ2.

Controls

Control Panel: The P1000X5D has top-mounted controls, covered by a removable panel. There are three sets of controls: one set each for the front, rear and subwoofer channels. The controls are as follows:

  • Front/Rear Channels:
    • Butterworth Crossovers: the 2-way crossover switch lets you select High Pass (HP) or All Pass (AP); the High Pass crossover point is continuously variable from 50Hz to 500Hz; the crossover slope is 12dB per octave
    • Gain: rotary gain control; continuously variable from 150mV to 5V (labeled 1 to 11)
  • Subwoofer Channel:
    • Punch EQ: rotary control to adjust the Punch EQ; 0-+18 dB, centered at 45 Hz; operates when Crossover switch is set to Low Pass (LP)
    • Butterworth Crossover: the Low Pass crossover point is continuously variable from 50Hz to 500Hz; the crossover slope is 12dB per octave
    • Infrasonic Filter: a 2-way switch to turn the 20Hz, 24dB/octave infrasonic filter on or off.
    • Phase: the variable 0-180° phase control allows you to listener to change the arrival time of the subwoofer sound waves relative to the same frequencies from the main speakers.
    • Gain: rotary gain control; continuously variable from 150mV to 5V (labeled 1 to 11)

Input Switches: Two side-mounted 2-way switches let you set the input modes. The 2/4CH switch lets you set the front and rear inputs to 2-channel or 4-channel mode. In 2-channel mode, only the front inputs need to be connected to send audio to all four output channels. In the 4-channel mode, both front and rear inputs are connected. The Sub Input switch lets you set the subwoofer channel to receive signals from the dedicated sub input or from the front channel input.

Connections

Power Connections: The power and ground terminals are nickel-plated set-screw wire connectors and will accommodate up to 4-gauge wire. An external 100-amp fuse (not included) must be installed on the power wire within 18 inches of the battery. If a wiring kit is used which includes a fuse with a value other than 100-amps, the original should be replaced with a 100-amp fuse. The remote turn-on terminal is also a nickel-plated set-screw and will accept wire up to 8-gauge. The supplied 2mm and 4mm Allen wrenches are required to tighten/loosen the terminals.

Speaker Connections: There are five pairs of speaker outputs for front left/right, rear left/right, and subwoofer. The terminals are nickel-plated set-screw wire connectors and will accept up to 8-gauge wire. The supplied 2mm Allen wrench is required to tighten/loosen the terminals.

RCA Inputs: The 3 pairs of RCA input jacks are nickel-plated to resist corrosion.

Remote Punch EQ (PEQ) Connection: An RJ-45 jack is provided for connecting an optional remote PEQ control (575ROCKPEQ, sold separately).

Note: Previous model Punch Bass and Para-Punch remotes will not work with this amp.

 
Be the first to review this product
Great Gear Giveaway rewards card

Submit a review and then enter to win a $500 rewards card

Review this product:

Thanks for taking the time to share your experiences about this product. Please be sure to focus your comments on the product itself. Read our Review Guidelines for more information.

Your email won't be visible. Please use the email address that is associated with your order.
(e.g., JohnD) Your review will be signed using the display name and location
(e.g., Charlottesville, VA)

Click on a star to rate the overall product on a scale of 1-5
1500 characters left
Attach a YouTube Review
Crutchfield Video Review Guidelines
  • Only submit videos that you made or are authorized to use.
  • Do not submit videos that contain music, video or visuals that are copyrighted and belong to someone else.
  • Please see our Review Guidelines for more information.
500 characters left
500 characters left

Add accessories for the Rockford Fosgate Punch P1000X5D

You'll need an amp wiring kit to install your new amplifier, as wiring is not included. See all categories & accessories

Rockford Fosgate RFK4X Complete 4-gauge amplifier wiring kit
Includes patch cable and speaker wire
12 people say
Your Price: $159.99
Add to Cart
Rockford Fosgate RFK4 4-gauge amplifier power wiring kit
10 people say
Your Price: $114.99
Add to Cart
EFX PA4BX Wiring Kit 4-gauge amplifier wiring kit — includes 2-channel patch cable
5 people say
Your Price: $79.99
Add to Cart
T-Spec 4PK Installation Kit 4-gauge amplifier wiring kit — includes speaker wire
3 people say
Your Price: $89.99
Add to Cart
Kicker PK4 4-gauge amplifier power wiring kit
Your Price: $129.99
Add to Cart
T-Spec 16-gauge Speaker Wire Black/white jacket — priced per foot
13 people say
Your Price: $0.69
Add to Cart
T-Spec 12-gauge Speaker Wire Black/white jacket — priced per foot
29 people say
Your Price: $1.99
Add to Cart
Stinger PRO Series Speaker Wire Priced per foot (16 Gauge)
50 people say
Your Price: $0.39
Add to Cart
T-Spec 2-Channel RCA Patch Cables Available in 7 different lengths (17-foot)
25 people say
Your Price: $19.99
Add to Cart
54 people say
Your Price: $7.99
Add to Cart
Rockford Fosgate PEQ Amp Remote Control For 2007-up Power and Punch Series amps
22 people say
Your Price: $29.99
Add to Cart
Rockford Fosgate RFFM100 MAXI Fuse Pair of 100-amp platinum-plated wafer fuses
2 people say
Your Price: $4.99
Add to Cart
T-SPEC V6-MANL Fuse Holder 4- to 8-gauge mini-ANL fuse holder
2 people say
Your Price: $9.99
Add to Cart
T-Spec Capacitor 1.5-farad capacitor with red LCD meter
11 people say
Your Price: $79.99
Add to Cart
Bojo Trim Panel Tools Set of 6 pry tools — helps remove interior and exterior trim and door panels
52 people say
Your Price: $24.99
Add to Cart
Pro.Fit Wire Worm Installation tool helps route wiring through tight spaces
31 people say
Your Price: $12.99
Add to Cart
Metra Crimp Tool and Connectors Package contains crimp tool and over 150 pieces
15 people say
Your Price: $19.99
Add to Cart
S&G Wire Cutter/Stripper Tool Cuts and strips 12- to 22-gauge wire
15 people say
Your Price: $19.99
Add to Cart
S&G Tool Aid 87650 Door Trim and Panel Removal Tool
68 people say
Your Price: $9.99
Add to Cart
Skewdriver Pro SPK4042 Ratcheting straight and offset screwdriver set with 40 bits (Skewdriver Pro with ratchet handle, pictured)
8 people say
Your Price: $49.99
Add to Cart
Bojo Trim Panel Tools Set of 6 pry tools — helps remove interior and exterior trim and door panels
2 people say
Your Price: $29.99
Add to Cart

Why choose SquareTrade?

The #1-Rated Protection Plan

Thousands of people have reviewed SquareTrade Protection Plans — and made us #1.

5-Day Service Guarantee & Free Shipping

We'll repair or replace your item in five business days or less after we've received it, or your plan is free. And, as always, we pay for all shipping.

Protection from Normal, Everyday Use

Repairing your average mechanical or electrical failure can cost as much as buying a new device. With SquareTrade, you're covered — including parts and labor.

3 Year Protection Plan
3 Year Protection Plan
Your Price: $89.99
Add to Cart
4 Year Protection Plan
4 Year Protection Plan
Your Price: $119.99
Add to Cart

For a more in-depth review and enhanced detailed information on the Rockford Fosgate Punch P1000X5D, please visit the Crutchfield website product page (/ISEO-rccbcspd/p_575P1000X5/Rockford-Fosgate-Punch-P1000X5D.html ).