About the Rockford Fosgate P1-1X10
Rockford Fosgate's P1-1X10 ported enclosure fills your ride with juicy, high-volume bass, so you and your passengers can rock out to the latest beats. The enclosure's Punch P1 10" woofer features a paper cone reinforced with Kevlar fibers, supported by a rubber surround. The heavy-duty motor assembly and advanced cooling vents allow this sub to handle up to 250 watts RMS without flinching.
Rugged 5/8" medium-density fiberboard construction means this enclosure will hold strong for fat, heavy bass. Industrial-grade black carpet provides a clean, finished look, and protects your trunk from nicks and scratches. This enclosure uses an advanced port design that promotes generous air movement, while reducing distortion-causing port noise, so you hear louder, deeper bass. Add an amp and some wiring, and feel the thick low end this enclosure adds to your ride.
Product highlights:
- ported hatchback-style enclosure with one 10" Punch P1 subwoofer
- 5/8" medium density fiberboard construction covered with black carpet
- 4-ohm total impedance
- power handling: 50-250 watts RMS
- peak power: 500 watts
- frequency response: 30-250 Hz
- sensitivity: 85 dB
- 17-1/16"W x 13-1/4"H x 16-1/8"D1 x 13-7/8"D2
- warranty: 1 year
- MFR # P1-1X10
What's in the box:
Rockford Fosgate P1-1X10 owner's manual
- Vented subwoofer enclosure loaded with one Punch P1S4 10" Woofer
- Installation and Operation Instructions
Customer reviews for Rockford Fosgate P1-1X10
Loading...
Loading reviews...
Average review:
5.0 out of 5 starsThanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Rockford Fosgate P1-1X10
Features & specs
General | ||
---|---|---|
Woofer Size (inches) | 10 | |
Speakers Per Box | 1 | |
Woofer Material | Kevlar/Paper | |
Enclosure Type | Ported | |
Color | Black | |
Pieces in System | 1 | |
Width (inches) | 17-1/16 | |
Height (inches) | 13-1/4 | |
Depth (inches) | 16-1/8 | |
Connector Type | Spring post | |
Frequency Response | 30-250 Hz | |
Power Range (Watts RMS) | 250 | |
Maximum Wattage | 500 | |
Sensitivity | 85 dB | |
Impedance | 4 ohms | |
Parts Warranty | 1 Year | |
Labor Warranty | 1 Year |
Product Research
Features
Punch Woofer: The enclosure houses one front-firing Rockford Fosgate Punch P1S4-10 10" subwoofer. The 4-ohm, single voice coil sub features a StampCast steel frame, a Kevlar fiber reinforced paper cone, and NBR surround (Nitrile Butadiene Rubber). An anodized aluminum voice coil former and spider venting help keep the subwoofer cool.
Spider: A compliant linear spider made from tear and fatigue resistant poly-cotton improves mechanical stability under high excursion, maintaining consistent excursion characteristics.
Solid MDF Construction: The enclosure is constructed of high quality 5/8" MDF (medium-density fiberboard), which resists flexing and has anti-resonant qualities.
Vented Enclosure: The vented enclosure is aided by precision construction through computer design. The enclosure consists of one front firing 10" Punch P1 series subwoofer with a proprietary high-flow, low-noise port. The speaker terminals are located on the left side of the box (when facing the box). The box is covered in black carpet.
Tuned Port: The enclosure uses a front-firing proprietary high-flow, low-noise port to help produce deep and loud bass efficiently.
Box Carpeting: The enclosure is finished with high-density carpeting for superior durability. The carpet is black.
Speaker Terminal: The subwoofer enclosure uses one pair of high current, spring loaded binding posts. The binding posts are located on the left side of the box and will accept pin connectors, single or dual banana plugs, or bare wire up to 10 gauge.
Power Handling: The subwoofer can handle up to 250 watts RMS; 500 watts peak power.
CEA-2031 Compliant: Power handling on the P1S4-10 subwoofer conforms to CEA-2031 industry standards. This means the subwoofer has the capacity to handle its rated power under continuous demand, not just for an instant.
Dimensions: The depth dimensions listed in Features & Specs include the subwoofer's trim ring, which adds approximately 7/8 of an inch. The depth of just the enclosure is 15-1/4 inches at the base and 13 inches at the top.
The Rockford Fosgate P1-1X10 replaces these items
Rockford Fosgate P1L-1X10
- ported hatchback-style enclosure with one 10" Punch P1 woofer
- 5/8" medium density fiberboard construction covered with black carpet
- handles 150 watts RMS
Loading...
Loading accessories...
Customer Q&A
5 questions already asked
Loading...
Loading articles...
Excellent depth of bass and clean sound at any level. Paired with a Rockford Fosgate amp (200W to sub) this is a great step up from the 8" ported previous sub. The smaller footprint (to previous sub) allows a full golf bag in the hatch now :)
Stewart from Katy, TX