About the Rockford Fosgate Punch P165-S
High-quality replacement speakers
The poly woofer and butyl rubber surround give you solid bass.
High-quality replacement speakers
Rockford Fosgate designed the Punch P165-S component speaker system as a high-grade replacement for your factory speakers. Each 6-1/2" woofer features a responsive polypropylene cone and butyl rubber surround that'll stand up to hours of high-volume jams. The separate 1" dome tweeters provide clear, extended highs that can hold their own when the bass gets heavy.
Rockford Fosgate innovations
Take a closer look and you'll notice a couple of cool innovations. Rockford Fosgate uses a new technique to attach the surround to the cone that yields up to 25% more cone area, for fuller sound and stronger performance. They build the crossover into the speaker frame so you don't have to find an area to mount a separate box. The slots around the frame eliminate the need to redrill screw holes when the factory holes are just a little bit off. Grilles are included.
Product highlights:
- component speaker system includes 2 woofers, 2 tweeters, and 2 woofer grilles
- 6-1/2" mineral-filled polypropylene woofer
- butyl rubber surround
- 1" polyetherimide (PEI) dome tweeter
- crossovers built into woofer baskets
- Vertical Attach Surround Technique (VAST™) increases cone area
- power range: 6-60 watts RMS (120 watts peak power)
- frequency response: 60-22,000 Hz
- sensitivity: 90.2 dB
- top-mount depth: 1-15/16"
- warranty: 1 year
- MFR # P165-S
What's in the box:
Rockford Fosgate Punch P165-S owner's manual
- Two 6-1/2" Woofers
- 2 Woofer grilles
- Two 1" tweeters (with attached 6" speaker wire terminated with female quick-slide connectors)
- 2 Front flush mount brackets
- 2 Rear flush mount brackets
- 2 Surface mounting housings
- 2 Tweeter trim rings
- Two M4x25mm Machine screws
- Two M4x10mm Machine screws
- Two M4x15mm Stud bolts
- Eight 1-1/4" Allen head screws
- 3mm Allen head bit
- 8 Speed clips
- Two 40" Lengths of tweeter speaker wire (each with male quick slides on one end and female quick slides on the other)
- Installation/Operation Instructions (English/ French/ Spanish/ German/ Italian)
Customer reviews for Rockford Fosgate Punch P165-S
Loading...
Loading reviews...
Average review:
4.5 out of 5 starsThanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Rockford Fosgate Punch P165-S
Features & specs
General | ||
---|---|---|
Speaker Size | ||
Design | 2-way | |
Tweeter Design | 1" Dome | |
Impedance (Ohms) | 4 | |
Tweeter Composition | Treated PEI | |
Woofer Composition | Mineral filled IMPP | |
Woofer Surround | Butyl Rubber | |
Parts Warranty | 1 Year | |
Labor Warranty | 1 Year | |
Specifications | ||
Sensitivity (1W at 1 meter) | 87.2 | |
Sensitivity at 2.83 volts | 90.2 | |
Frequency Response | 60 - 22k Hz | |
Minimum RMS Wattage | 6 | |
Maximum RMS Wattage | 60 | |
Peak Power Handling (Watts) | 120 | |
Top-mount Depth (Inches) | 1 15/16 | |
Bottom-mount Depth (Inches) | N/A | |
Cutout Diameter or Length (inches) | 5 | |
Mounting Height (Inches) | 0.423 | |
Frame Width | 6.15 | |
Frame Length | 6.15 |
Product Research
Features
Injection-Molded Polypropylene Woofers: The woofer cones are mineral filled, injection-molded polypropylene. This molding process assures a uniform cone thickness for superior linearity and clarity. It is also light weight and rigid for decreased distortion and improved bass response.
Butyl Rubber Surrounds: The butyl rubber surrounds dampen unwanted harmonic distortion while maintaining linear geometry under extreme weather conditions. This leads to less distortion, superior frequency response, and superior durability.
VAST Surround: The Vertical Attach Surround Technique (VAST) increases a speaker's effective radiating cone area without increasing the size of the basket.
FlexFit Basket: The Flex Fit frame utilizes slots (where possible) instead of single screw sized holes; allowing slight adjustment of the speaker when mounted.
Woofer Size: Although the FlexFit basket allows a wide range of screw hole positions, it does not offer the standard three hole 6-1/2" pattern. Drilling new screw holes may be necessary.
PEI Dome Tweeters: The 1" dome tweeters are made of Poly-Ether-Imide (PEI); PEI is a polymer film that produces a wide soundstage for superior imaging.
Mounting: The tweeters have multiple mounting configurations; choose flush or surface mount. The surface mount housing can be positioned at a 10° or 30° angle. Depending on the mount used, the installed dimensions are:
Flush | Surface 10° | Surface 30° | |
---|---|---|---|
Mounting Height | 0.446" | 1.075" | 1.265" |
Mounting Depth | 0.911" | Screw Depth | Screw Depth |
Frame Diameter | 2.357" | N/A | N/A |
Cutout Diameter | 1.75" | N/A | N/A |
Frame Width | N/A | 2.130" | 2.130" |
Frame Depth | N/A | 2.162" | 2.140" |
Crossovers: The high-pass crossovers are integrated into the baskets of the woofers. The slope is 12dB per octave.
Speaker Terminals: These speakers have 0.25" wide positive (+) terminals and 0.187" wide negative (-) terminals, which are too large for the vehicle-specific speaker harnesses Crutchfield supplies for many vehicle applications. We recommend that a pack of assorted female quick slides (item number 120FQS10PK, sold separately) be purchased and spliced to the harnesses to adapt them to the speaker terminals.
Loading...
Loading accessories...
Customer Q&A
5 questions already asked
Loading...
Loading articles...
These were used to replace the stock speakers in my wife's 300 Touring. So far I am very happy with them. They reproduce clear/crisp highs.
lambertmjr from Hawaii