Skip Navigation

Rockford Fosgate Punch P1T-S

1" dome tweeters

3 Reviews | 1 question - 1 answer

Item #: 575P1TS

In Stock

Was: $99.99

Sale: -$40.00

Add to Cart

Ask an expert

Our VA-based experts can help.

1.888.955.6000

ChatEmail

Add to Cart

Rockford Fosgate Punch P1T-S

Overview

Our take on the Rockford Fosgate Punch P1T-S

Rockford Fosgate showcases their fanatical commitment to sonic excellence in the Punch Series of speakers, amps, and subs. If you like to listen to potent, powerful music — and feel it too — Punch components will give you impressive sound that'll stand out in a crowd.

Bring out the details in your tunes

Rockford Fosgate showcases their fanatical commitment to sonic excellence in the Punch Series of speakers, amps, and subs. If you like to listen to potent, powerful music — and feel it too — Punch components will give you impressive sound that'll stand out in a crowd.

If your car's sound system is sounding a little dull, Rockford Fosgate's Punch Series P1T-S tweeters use a dome design that delivers clear, extended highs, so these tweeters can hold their own when the bass gets heavy. Separate crossovers send only the high frequencies to these tweeters, and you'll find three settings for adjusting tweeter output. You can flush- or surface-mount these tweeters, making it easier to find the perfect spot in your vehicle. These tweeters will bring out all the little details in your music that can get lost when your speakers are mounted low in your doors.

Installation note: You'll need a pair of our universal backstraps to install these tweeters in the factory locations.

What's in the Box:

  • Two 1" tweeters (with attached 6" speaker wire terminated with female quick-slide connectors)
  • 2 Crossovers
  • 2 Front flush mount brackets
  • 2 Rear flush mount brackets
  • 2 Surface mounting housings
  • 2 Trim rings
  • Two M4x25mm Machine screws
  • Two M4x10mm Machine screws
  • Two M4x16mm Stud bolts
  • Two 40" Lengths of speaker wire (each with male quick slides on one end and female quick slides on the other)
  • Two 40" Lengths of speaker wire (each with female quick slides on one end and bare wire on the other)
  • Four 7" Zip ties
  • Installation/Operation Instructions (English/ French/ Spanish/ German/ Italian)

Product Highlights:

  • 1" polyetherimide (PEI) dome tweeters (pair)
  • flush- and surface-mount hardware included
  • separate passive crossovers (3,000 Hz at 12 dB per octave)
  • power handling: 6-60 watts RMS (80 watts peak power)
  • frequency response: 3,500-22,000 Hz
  • sensitivity: 90 dB
  • top-mount depth: 1"
  • warranty: 1 year
  • Our 60-day money-back guarantee
Reviews

Rockford Fosgate Punch P1T-S Reviews

Average Customer Review:

3 Reviews

Not bad at all for the price

Dano from WV on 2/20/2013

Definately bring new life to the music for less cost you will hear the HI's your missing, only had them in a day but a big improvement. Listening is so indivdualized its tough to say hey these are the best etc. They drop right in the 1 inch tweeters OEM on a Nissan Titan 2011, these were easy to install and a great improvement over the OEM, can you do better probably but can you do better at this price point probably not so far so good.

Pros: Price point and sound quality

Cons: None yet

Too harsh

MikeE from Ashland, KY on 4/4/2012

I am assuming these are the same tweeters that come with the Punch component 2-way speakers. I hate them. Ordered a set of JL silk tweeters to hopefully eliminate the harshness. My EQ cannot fix these.

Pros: Not much

Cons: Ear-shredding

Loud, harsh hi-hats

rft1d412 from Iowa on 9/25/2011

These tweeters are very loud. That is the only thing good about them. The sound quality isn't there. The hi hats are very loud and harsh, while other things like bells and stringed instruments are quiet and tinny. Boosting the treble with the 13-band EQ on my DEH-P930 makes it even worse. They are powered by an old school Orion 280gx getting 80wrms per channel paired with an older set of Infinity 6x8 coaxial's with the separate tweeter wire un-hooked. It is not my system making them sound the way they do. These replaced a set of lower powered Kenwood tweeters which were also tinny sounding, but were much more even sounding. These Punch tweeters lack in bells and strings, but strive on hi-hats, which produces a very un-even sound that not even my EQ can fix.

Pros:

Cons:

Details

Hands-on research

Product Research

Features

Overview: The Rockford Fosgate Punch P1T-S is a dedicated tweeter system featuring lightweight PEI domes. The included tweeter housings allow flush or surface mounting (surface mounting at two different angles).

PEI Dome Tweeters: The 1" dome tweeters are made of Poly-Ether-Imide (PEI); PEI is a polymer film that produces a wide soundstage for superior imaging.

Mounting: The P1T-S provides multiple mounting configurations; choose flush or surface mount. The surface mount housing can be positioned at a 10° or 30° angle. Depending on the mount used, the installed dimensions are:

  Flush Surface 10° Surface 30°
Mounting Height 0.393" 1.048" 1.065"
Mounting Depth 0.961" Screw Depth Screw Depth
Frame Diameter 2.128" N/A N/A
Cutout Diameter 1.745" N/A N/A
Frame Width N/A 2.130" 2.130"
Frame Depth N/A 2.162" 2.174"

Crossovers: The tweeters include two passive, high-pass crossover networks. The slope is 12dB per octave and the crossover point is 3000 Hz. There are three positive input terminals, allowing you to attenuate the tweeter output; 0 dB, -2 dB, and -4 dB. The crossovers' dimensions are:

  • Length: 3.35" (4.45" with wiring attached)
  • Width: 1.932"
  • Height: 1.258"

Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.

Accessories
Staff Reviews

Product reviews from the Crutchfield Labs

Four popular car speaker lines
by Robert Ferency-Viars

We listen to Alpine Type-S, Polk Audio DXi, Infinity Reference X, and Rockford Fosgate Punch car speakers in the Crutchfield Labs.

What are the Labs?
Q & A

Customer Q&A

Crutchfield asked  
Why did you buy this?

wolf suggested them. Wolf's Bio: http://www.crutchfield.com/Support/Bio.aspx?bio=205 [ michael  Mar 21, 2016 ]
I love Rockford fosgate best company for sound, durability, and good pricing [ kyle  Mar 02, 2016 ]

1 question already asked

We have not received any answers from other customers on your question. I would recommend reaching out to an Advisor by phone (1-800-324-9695) or online chat. They should be able to help answer your question. [ Kenny  Feb 12, 2016 ]  Staff
Library