1.888.955.6000
crutchfield.com
Crutchfield

Rockford Fosgate Punch P1T-S

1" dome tweeters

Zoom
  • Rockford Fosgate Punch P1T-S

    Front

Crutchfield OMC logo
You'll have to custom-mount tweeters or midrange speakers, which usually requires drilling holes and running new wires.
 

Our take on the Rockford Fosgate Punch P1T-S

by Jo Greene
Rockford Fosgate

Rockford Fosgate showcases their fanatical commitment to sonic excellence in the Punch Series of speakers, amps, and subs. If you like to listen to potent, powerful music — and feel it too — Punch components will give you impressive sound that'll stand out in a crowd.

If your car's sound system is sounding a little dull, Rockford Fosgate's Punch Series P1T-S tweeters use a dome design that delivers clear, extended highs, so these tweeters can hold their own when the bass gets heavy. Separate crossovers send only the high frequencies to these tweeters, and you'll find three settings for adjusting tweeter output. You can flush- or surface-mount these tweeters, making it easier to find the perfect spot in your vehicle. These tweeters will bring out all the little details in your music that can get lost when your speakers are mounted low in your doors.

See more info on this item

Highlights:

  • 1" polyetherimide (PEI) dome tweeters (pair)
  • flush- and surface-mount hardware included
  • separate passive crossovers (3,000 Hz at 12 dB per octave)
  • power handling: 6-60 watts RMS (80 watts peak power)
  • frequency response: 3,500-22,000 Hz
  • sensitivity: 90 dB
  • top-mount depth: 1"
  • warranty: 1 year
  • Our 60-day money-back guarantee

Hands-on research from the Crutchfield Labs (what are the Labs?)

Features and Specs
General
Tweeter Design 1" Dome
Tweeter Composition PEI
Parts Warranty 1 Year
Labor Warranty 1 Year
Specifications
Sensitivity 90 dB
Frequency Response 3500 - 22k Hz
High-Pass Crossover Frequency 3000 Hz
RMS Power Range (Watts) 6-60
Peak Power Handling (Watts) 120
Impedance (Ohms) 4
Top-mount Depth (Inches) 1
Cutout Diameter or Length (inches) 1 3/4
Product Research
What's in the box?

Download owner's manual

  • Two 1" tweeters (with attached 6" speaker wire terminated with female quick-slide connectors)
  • 2 Crossovers
  • 2 Front flush mount brackets
  • 2 Rear flush mount brackets
  • 2 Surface mounting housings
  • 2 Trim rings
  • Two M4x25mm Machine screws
  • Two M4x10mm Machine screws
  • Two M4x16mm Stud bolts
  • Two 40" Lengths of speaker wire (each with male quick slides on one end and female quick slides on the other)
  • Two 40" Lengths of speaker wire (each with female quick slides on one end and bare wire on the other)
  • Four 7" Zip ties
  • Installation/Operation Instructions (English/ French/ Spanish/ German/ Italian)

Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team — they open the box, verify contents, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.

Features

Overview: The Rockford Fosgate Punch P1T-S is a dedicated tweeter system featuring lightweight PEI domes. The included tweeter housings allow flush or surface mounting (surface mounting at two different angles).

PEI Dome Tweeters: The 1" dome tweeters are made of Poly-Ether-Imide (PEI); PEI is a polymer film that produces a wide soundstage for superior imaging.

Mounting: The P1T-S provides multiple mounting configurations; choose flush or surface mount. The surface mount housing can be positioned at a 10° or 30° angle. Depending on the mount used, the installed dimensions are:

  Flush Surface 10° Surface 30°
Mounting Height 0.393" 1.048" 1.065"
Mounting Depth 0.961" Screw Depth Screw Depth
Frame Diameter 2.128" N/A N/A
Cutout Diameter 1.745" N/A N/A
Frame Width N/A 2.130" 2.130"
Frame Depth N/A 2.162" 2.174"

Crossovers: The tweeters include two passive, high-pass crossover networks. The slope is 12dB per octave and the crossover point is 3000 Hz. There are three positive input terminals, allowing you to attenuate the tweeter output; 0 dB, -2 dB, and -4 dB. The crossovers' dimensions are:

  • Length: 3.35" (4.45" with wiring attached)
  • Width: 1.932"
  • Height: 1.258"
 
Review this product
Great Gear Giveaway rewards card

Submit a review and then enter to win a $500 rewards card

Rockford Fosgate Punch P1T-S Reviews

Average Customer Review:

3 people say:

Review this product:

Thanks for taking the time to share your experiences about this product. Please be sure to focus your comments on the product itself. Read our Review Guidelines for more information.

Your email won't be visible. Please use the email address that is associated with your order.
(e.g., JohnD) Your review will be signed using the display name and location
(e.g., Charlottesville, VA)

Click on a star to rate the overall product on a scale of 1-5
1500 characters left
Attach a YouTube Review
Crutchfield Video Review Guidelines
  • Only submit videos that you made or are authorized to use.
  • Do not submit videos that contain music, video or visuals that are copyrighted and belong to someone else.
  • Please see our Review Guidelines for more information.
500 characters left
500 characters left
Filter by rating:
3 out of 5

Not bad at all for the price

Written By Dano, WV on Wednesday, February 20, 2013
 
Definately bring new life to the music for less cost you will hear the HI's your missing, only had them in a day but a big improvement. Listening is so indivdualized its tough to say hey these are the best etc.

They drop right in the 1 inch tweeters OEM on a Nissan Titan 2011, these were easy to install and a great improvement over the OEM, can you do better probably but can you do better at this price point probably not so far so good.
Pros:
Price point and sound quality
Cons:
None yet
2 out of 2 people found this helpful
Was this review helpful?    Yes | No
 
2 out of 5

Too harsh

Written By MikeE, Ashland, KY on Wednesday, April 04, 2012
 
I am assuming these are the same tweeters that come with the Punch component 2-way speakers. I hate them. Ordered a set of JL silk tweeters to hopefully eliminate the harshness. My EQ cannot fix these.
Pros:
Not much
Cons:
Ear-shredding
1 out of 3 people found this helpful
Was this review helpful?    Yes | No
 
3 out of 5

Loud, harsh hi-hats

Written By rft1d412, Iowa on Sunday, September 25, 2011
 
These tweeters are very loud. That is the only thing good about them. The sound quality isn't there. The hi hats are very loud and harsh, while other things like bells and stringed instruments are quiet and tinny. Boosting the treble with the 13-band EQ on my DEH-P930 makes it even worse. They are powered by an old school Orion 280gx getting 80wrms per channel paired with an older set of Infinity 6x8 coaxial's with the separate tweeter wire un-hooked. It is not my system making them sound the way they do. These replaced a set of lower powered Kenwood tweeters which were also tinny sounding, but were much more even sounding. These Punch tweeters lack in bells and strings, but strive on hi-hats, which produces a very un-even sound that not even my EQ can fix.
4 out of 7 people found this helpful
Was this review helpful?    Yes | No
 

Add accessories for the Rockford Fosgate Punch P1T-S

You may need speaker wire to get the signal to your tweeters. It's sold by the foot, so enter the amount you'll need when you get to your cart. See all categories & accessories

T-Spec 16-gauge Speaker Wire Black/white jacket — priced per foot
13 people say
Your Price: $0.69
Add to Cart
T-Spec 12-gauge Speaker Wire Black/white jacket — priced per foot
29 people say
Your Price: $1.99
Add to Cart
Stinger PRO Series Speaker Wire Priced per foot (16 Gauge)
50 people say
Your Price: $0.39
Add to Cart
Dynamat 10415 Xtreme Speaker Kit Two 10-in. x 10-in. Sheets
45 people say
Your Price: $26.99
Add to Cart
Dynamat 10435 Xtreme Door Kit With four 12" x 36" sheets — covers two doors
31 people say
Your Price: $99.99
Add to Cart
Bojo Trim Panel Tools Set of 6 pry tools — helps remove interior and exterior trim and door panels
52 people say
Your Price: $24.99
Add to Cart
Metra Crimp Tool and Connectors Package contains crimp tool and over 150 pieces
15 people say
Your Price: $19.99
Add to Cart
S&G Wire Cutter/Stripper Tool Cuts and strips 12- to 22-gauge wire
15 people say
Your Price: $19.99
Add to Cart
S&G Tool Aid 87650 Door Trim and Panel Removal Tool
67 people say
Your Price: $9.99
Add to Cart
Skewdriver Pro SPK4042 Ratcheting straight and offset screwdriver set with 40 bits (Skewdriver Pro with ratchet handle, pictured)
8 people say
Your Price: $49.99
Add to Cart
Spec Tools SQR-200a Squeeze Wrench Narrow space ratchet kit with 18 sockets
1 person says
Your Price: $49.99
Add to Cart
Bojo Trim Panel Tools Set of 6 pry tools — helps remove interior and exterior trim and door panels
2 people say
Your Price: $29.99
Add to Cart
Posi-Products™ Car Speaker Connectors 8 connectors for installing car speakers
18 people say
Your Price: $11.99
Add to Cart

Why choose SquareTrade?

The #1-Rated Protection Plan

Thousands of people have reviewed SquareTrade Protection Plans — and made us #1.

5-Day Service Guarantee & Free Shipping

We'll repair or replace your item in five business days or less after we've received it, or your plan is free. And, as always, we pay for all shipping.

Protection from Normal, Everyday Use

Repairing your average mechanical or electrical failure can cost as much as buying a new device. With SquareTrade, you're covered — including parts and labor.

3 Year Protection Plan
3 Year Protection Plan
Your Price: $14.99
Add to Cart

For a more in-depth review and enhanced detailed information on the Rockford Fosgate Punch P1T-S, please visit the Crutchfield website product page (/ISEO-rccbcspd/p_575P1TS/Rockford-Fosgate-Punch-P1T-S.html ).