About the Rockford Fosgate P210D2
Step up and enjoy the big sound of Rockford Fosgate's Punch Stage 2 subwoofer. A molded polypropylene cone, heavy-duty foam surround, and stamped steel frame combine to ensure you'll enjoy reliable operation and heavy-duty bass.
The P210D2 10" subwoofer's dual voice coil design allows you to get the most out of your amplifier, whether you have a single sub or a multi-woofer system. However you use it, the sub's beefy internal parts ensure solid power handling and resistance to the heat buildup that can damage lesser speakers.
This sub delivers a big sound from small sealed or ported enclosures, a real plus if you've got limited space for a sub in your vehicle.
Priced per speaker
Product highlights:
- 10" subwoofer with dual 2-ohm voice coils
- molded polypropylene cone with foam surround
- stamped steel frame
- 60-ounce magnet and aluminum voice coil former
- power range: 50-250 RMS watts (125 watts per voice coil)
- peak power: 500 watts
- frequency response: 29-200 Hz
- sensitivity: 84.2 dB
- mounting depth: depth: 5-3/16"
- sealed box volume: 0.65 cu. ft.
- ported box volume: 1.25 cu. ft.
- warranty: 1 year
- MFR # P210D2
What's in the box:
Rockford Fosgate P210D2 owner's manual
- 10" Dual voice coil woofer
- Concealing ring
- Twelve 1-1/4" self-tapping Allen head screws
- Allen head bit
- Installation and Operation manual (English/ French/ Spanish/ German/ Italian)
Customer reviews for Rockford Fosgate P210D2
Loading...
Loading reviews...
Average review:
4.5 out of 5 starsThanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Rockford Fosgate P210D2
Features & specs
Features and Specs | ||
---|---|---|
Size | 10 -inch | |
Impedance (Ohms) | --- | |
Cone Material | Molded polypropylene | |
Surround Material | Foam | |
Port diameter (inches) | 3 | |
Port length (inches) | 7.3 | |
Free-Air | No | |
Dual Voice Coil | Yes | |
Sensitivity |
84.2 dB at 1 watt | |
Frequency Response | 20 - 200 Hz | |
Max RMS Power Handling | 250 | |
Peak Power Handling (Watts) | 500 | |
Top Mount Depth (inches) | 5 5/16 | |
Bottom Mount Depth (inches) | N/A | |
Cutout Diameter or Length (inches) | 9 1/8 | |
Frame Width | 10.163 | |
Frame Length | 10.163 | |
Vas (liters) | 30.5 | |
Fs (Hz) | 29 | |
Qts | 0.482 | |
Xmax (millimeters) | 11 | |
Parts Warranty | 1 Year | |
Labor Warranty | 1 Year | |
Box Requirements | ||
Ideal Sealed Box Volume (cubic feet) | 0.65 | |
Minimum Sealed Box Volume (cubic feet) | 0.5 | |
Maximum Sealed Box Volume (cubic feet) | 1 | |
Ideal Ported Box Volume (cubic feet) | 1.25 | |
Minimum Ported Box Volume (cubic feet) | 1 | |
Maximum Ported Box Volume (cubic feet) | 1.5 |
Product Research
Features
Enclosure Compatibility
Features
Woofer: The cone uses a parabolic injection molded polypropylene design. Polypropylene is lightweight and strong, giving the woofer high power handling and low distortion.
High Excursion Large Roll Surround: A large edge roll surround allows Punch woofers to produce 20% more linear excursion than standard surrounds, resulting in more bass output.
Anodized Aluminum Voice Coil Former: Aluminum voice coil formers offer superior heat dissipation over other commonly used materials. The hard-anodized finish on this 2" former increases its strength. These two factors combine to improve the overall power handling characteristics of the subwoofer.
Precision Stamped CRS Basket: Reinforced cold roll steel basket legs dampen unwanted resonance for better bass coupling.
Double Stacked Magnet Motor Assembly: The stacked magnet assembly is used to create a powerful linear motor with increased excursion capability for superior bass output.
Removable Magnet Cover: The cosmetic magnet cover can be removed when additional mounting clearance is required. With the magnet cover installed, the woofer has the following dimensions:
- Magnet Diameter: 7.109"
- Depth as top: 5.643"
Spring Posts: The heavy-duty spring posts will accept pin connectors and bare wire up to 10 gauge.
Concealing Ring: Once the subwoofer is mounted, the concealing ring can be installed to hide the mounting screws, giving the subwoofer a finished look. With the ring in place the mounting height increases to 0.844".
Enclosure Compatibility
Sealed Box Volume: The sealed box sizes recommended by Rockford Fosgate range from 0.5 cu/ft to 1.0 cu/ft. The ideal size recommended is 0.65 cu/ft.
Recommended Vented Box Volume: The vented box sizes recommended by Rockford Fosgate range from 1.0 cu/ft to 1.5 cu/ft. The ideal size recommended is 1.25 cu/ft with one 3" diameter x 7.3" long port. A 1.0 cu/ft box requires a 3" diameter x 9.6" long port; a 1.5 cu/ft box requires a 3" diameter x 5.7" long port.
Loading...
Loading accessories...
Customer Q&A
Loading...
Loading articles...
I got these for my '00 Ext Cab GMC for under my back seat and they slam. I've owned many subs before for different trucks, but these by far have been my favorite. These are practically a steal at their price, don't hesitate to buy!
Steve from New Orleans, LA