1-888-955-6000
crutchfield.com
Crutchfield

Rockford Punch P600X4

4-channel car amplifier — 75 watts RMS x 4

Save 50% on a select amp wiring kit with any $249+ car amplifier with any $249+ car amplifier
Zoom
  • Rockford Punch P600X4

    Front

  • Rockford Punch P600X4

  • Rockford Punch P600X4

  • Rockford Punch P600X4

Crutchfield OMC logo
We don't check this item for fit or compatibility.
 

Our take on the Rockford Punch P600X4

by Buck Pomerantz
Rockford Fosgate

My system has plenty of power. Who needs an amp?

You might think you don't need an amp because you have a 400-watt system in your car, or because your new stereo puts out 50 watts a channel. But those are peak wattage ratings, which may boil down to 15 or 20 watts per channel, using the more realistic RMS rating. An amp sends your speakers the power they need to deliver your music with clarity and impact, whether you're using factory speakers or high-performance components. And low-frequency reproduction requires lots of power, so an amp is an absolute must if you're adding a sub to your system.

Big power for your speakers or subwoofers

Rockford Fosgate's Punch P600X4 amplifier can put out 75 watts RMS to each of your front and rear speakers, plenty of power for clean music even at high levels. You can use the amp's high-pass filter to remove low bass from your speakers so they'll play more efficiently. You can also switch this amp into 2-channel mode to drive a couple of subwoofers with up to 300 watts RMS each. The amp's low-pass filter comes in handy for getting the right sound from your sub/enclosure combo. The Punch EQ2 includes bass and treble boosts, in case you want to add some boom and sizzle back into the mix.

Easy to set for optimum performance

P300X2 control panel shown as example

P300X2 control panel shown as example

Once again, Rockford Fosgate steps away from the crowd with their C.L.E.A.N. technology (Calibrated Level Eliminates Audible Noise) — a setup system that ensures your music will sound as clean and powerful as possible. It works like this: play the setup tone on the included test CD, adjust the receiver volume until a red clip light on the amp goes out, then turn the amp gain up until a blue light comes on. It's that simple — your amplifier is now set to match your receiver's output. When your receiver reaches maximum clean volume, you'll get maximum clean power from your Punch amp. At quiet listening levels, you'll hear less background noise and more of your music.

Keeps an eye on things while playing

If that blue light turns solid red while you're playing music, the amp's telling you that your source is distorting and you should turn it down, or risk damage to your gear. The optional PLC2 remote level control also doubles as a clip indicator, so you can see from the front seat if your music's clipping. The amp's built-in computer keeps tabs on the output current, ensuring that plunging speaker impedances (they change during play) or even a short circuit won't hurt anything.

Maintaining coolness raises efficiency and lowers distortion

Rockford Fosgate's Dynamic Thermal Management system uses forced air to dissipate heat evenly across the amp and out through the high-mass heatsink, efficiently drawing heat away from vital internal parts. Their proprietary MEHSA cooling process maximizes the heat transfer from the MOSFET devices to the heatsink, allowing the heat to escape more readily, so the transistors stay cooler and work better.

Rockford Fosgate P600X4

                                                     P600X4 connection panel and input clip light

See more info on this item

Highlights:

  • 4-channel car amplifier
  • 75 watts RMS x 4 at 4 ohms (150 watts RMS x 4 at 2 ohms)
  • 300 watts RMS x 2 bridged at 4 ohms (4-ohm stable in bridged mode)
  • CEA-2006 compliant
Features:
  • variable high- and low-pass filter filter (50-250 Hz, 12 dB/octave)
  • variable PEQ2 bass/treble boost (0-18 dB at 45 Hz and 0-14 dB at 12.5K Hz)
  • C.L.E.A.N. gain setup system includes test tone CD
  • test tones also available as MP3 download from Amazon On Demand, Rhapsody, Google Play, and Spotify, labeled "3sixty.3 setup disc" (Punch amps and the 3sixty.3 use the same test tone tracks for setup)
  • Class-AB amplifier design
  • frequency response: 20-20K Hz
  • Dynamic Thermal Management and MEHSA MOSFET cooling systems
  • MOSFET power and output stages
  • preamp inputs and outputs
  • speaker-level inputs (speaker wire to RCA adapter required)
  • signal-sensing turn-on with speaker-level inputs eliminate need for remote turn-on lead
More Info:
  • optional PLC2 wired remote level control with clip light available
  • 4-gauge power and ground leads and an 100-amp fuse recommended — wiring and hardware not included with amplifier
  • no onboard fuses — when installing multiple amps in a system, an additional 100-amp in-line fuse between the distribution block and the amplifier is recommended
  • 13-3/8"W x 2-7/16"H x 8-13/16"D
  • warranty: 1 year
  • Our 60-day money-back guarantee

Hands-on research from the Crutchfield Labs (what are the Labs?)

Features and Specs
Performance
RMS Power Output (Watts x Channels)
Loading...
75 x 4
Peak Power Output (Watts x Channels)
Loading...
N/A
Power at 2 Ohms (Watts x Channels)
Loading...
150 x 4
Bridged Power (Watts x Channels)
Loading...
300 x 2
Minimum Impedance Bridged
Loading...
4
Minimum Impedance Unbridged
Loading...
2
Best Frequency Response
Loading...
20-20k Hz
THD at Rated RMS Power
Loading...
1%
Signal to Noise Ratio
Loading...
85 dB
Input Voltage
Loading...
14.4v
Features
Amplifier Class
Loading...
AB
Low-Pass Crossover Frequency
Loading...
50-250 Hz
Low-Pass Slope (dB/octave)
Loading...
12 dB/octave
High-Pass Crossover Frequency
Loading...
50-250 Hz
High-Pass Slope (dB/octave)
Loading...
12 dB
Bass Boost
Loading...
0-18 dB
Bass Boost Frequency
Loading...
45 Hz
Fan Cooled
Loading...
No
Fuse Rating
Loading...
100
Speaker Level Inputs
Loading...
RCA
Preamp Outputs
Loading...
1 pair
Width (inches)
Loading...
13-3/8
Height (inches)
Loading...
2-7/16
Depth (inches)
Loading...
8-13/16
Parts Warranty
Loading...
1 Year
Labor Warranty
Loading...
1 Year
Product Research
What's in the box?

Download owner's manual

  • 4-Channel amplifier
  • Four 1-1/2" Self-tapping screws
  • 2.5mm Allen wrench
  • Quick setup instructions
  • Certificate of Performance
  • Setup/Manual disc

Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team — they open the box, verify contents, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.

Features
Controls
Connections

Features

CEA-2006 Compliant: CEA-2006 is a system of testing and measurement methods for mobile audio amplifiers. This voluntary standard advocates a uniform method for measuring an amplifier's RMS power output and signal-to-noise ratio. The criteria for measuring power uses a DC input voltage of 14.4 volts and the RMS power output is measured with 1% or less Total Harmonic Distortion plus noise (THD+N) over a frequency range of 20 Hz to 20 kHz (for full range amplifiers). Signal-to-Noise ratio is measured in weighted absolute decibels (dBA) at a reference of 1 watt into 4Ω. CEA-2006 allows consumers to compare car amplifiers and receivers on an equal basis. Using CEA-2006 criteria, the Rockford Fosgate P600X4 is rated as follows:

  • Power Output:
    • 4Ω: 75 watts x 4-channels
    • 2Ω: 150 watts x 4-channels
    • Bridged: 300 watts x 2-channel (into 4Ω)
  • Signal to Noise Ratio: 85 dBA (105 dB at rated power)

Cast Aluminum Heatsink: The cast aluminum heatsink dissipates heat generated by the amplifier's circuitry. The inherent advantage of casting provides a 30% cooling improvement over conventional extrusion heatsink designs.

Dynamic Thermal Management (DTM): DTM evenly distributes excess heat across the amplifier's entire heatsink.

MEHSA³ (Maximum Efficiency Heat Sink Application-3rd Generation): MEHSA is a Rockford Fosgate proprietary process that increases the heat transfer from the MOSFET devices to the heatsink. The multi-layer insulated metal MEHSA substrate operates with minimal thermal resistance, spreading heat both downward and outward to quickly dissipate heat from each device across the heatsink. This allows greater power output, enhanced thermal stability, and maximum reliability.

Trans-ANA (TRANSconductance Active Nodal Amplifier): Trans-ANA is a circuit that allows the audio signal to pass through the amplifier at low voltage. The signal is directly level-shifted to the fixed high voltage rails via a pair of drive transistors. Signal linearity is assured by an active node formed by the drive transistors at ultrasonic frequencies. The result is crystal clear sound quality.

NOMAD (NOn-Multiplying Advanced Decision): NOMAD is an intelligent protection circuit that uses an analog computer to make real time decisions regarding temperature, voltage, current and impedance. The amplifier is protected without limiting sound output unless needed.

DSM (Discrete Surface Mount): High speed robotics are used in the manufacturing process to place 1% tolerance parts and large board traces. DSM improves the efficiency of the circuit, decreases cross-talk from other discrete components and lowers operating temperature.

CLEAN Set-Up: Rockford's integrated level setting technology, CLEAN (Calibrated Level Eliminates Audible Noise), replaces sophisticated test equipment with input/output clip LEDs, allowing you to match the source unit's output to the amp's gain, and optimize the amp's output. The input clip indicator works in conjunction with the audio source volume, illuminating red when the source reaches it's clipping point. The output clip indicator works in conjunction with the input level dial on the amp, illuminating the appropriate color depending on the audio content used for the setup.

Power and Protection LEDs: The LEDs are located on top of the amplifier. A blue Power LED illuminates when the amplifier is turned on. A red Thermal LED illuminates if the amplifier overheats. The yellow Protect LED illuminates if a short circuit or too low an impedance is detected at the speaker connections. When any of the protection circuits engage, the amp automatically shuts down until the problem is corrected.

Balanced Differential Inputs: Differential inputs eliminate noise picked up by signal cables by measuring the voltage of both the (+) and (-) input signal, then subtracting the voltage common to both conductors (noise), resulting in only the clean signal entering the amplifier.

Controls

Input Level: The front and rear sections of the amplifier have separate input level controls. To accommodate the varying range of signal levels from today's factory and aftermarket radios, the input levels are adjustable from 150mV to 12V.

Crossover: The amplifier's internal crossovers are also independent for the front and rear channels. The slope is 12 dB/octave and both can be set to high-pass, all-pass (full range), or low-pass operation. The crossover points are variable from 50 Hz to 250 Hz.

Punch EQ: Both the front and rear amplifier sections have Punch EQ circuits, the function of which changes with the crossover switch. When the crossover is set to low-pass, the Punch EQ acts as a variable bass boost; 0-18 dB at 45 Hz. When the crossover is set to high-pass, the Punch EQ acts as variable treble boost, 0-14 dB at 12.5 kHz. When the crossover is set to all-pass, both the bass and treble boost circuits are active.

Input Switch: With the input switch in the 2-channel position, connecting only the front inputs will send the signal to both the front and rear sections of the amplifier. In the 4-channel position, both front and rear inputs must be used.

Connections

Power Connections: The power and ground terminals are nickel-plated captive c-clamp wire connectors and will accommodate up to 4-gauge wire. An external 100-amp fuse (not included) must be installed on the power wire. The remote turn-on terminal will accept up to 12-gauge wire. A Phillips or flat-head screwdriver (not supplied) is required to tighten/loosen the terminals.

Speaker Connections: The four pair of speaker output terminals are also nickel-plated captive c-clamps and will accept up to 8-gauge wire. A Phillips or flat-head screwdriver (not supplied) is required to tighten/loosen the terminals.

Signal Input: The front and rear RCA inputs will accept either a line-level or speaker-level input. A speaker-level signal can be connected using a Speaker Wire to RCA adapter (sold separately). When using a speaker-level input signal, the auto turn-on feature is active and the remote turn-on terminal becomes a 12 volt output to turn on/off up to two additional amplifiers or other components.

Line Level Output: The amplifier has a pair of RCA line level pass-thru outputs to feed another amplifier. The pass-thru output is passive (the same signal present at the amp's input) and the amp's crossover has no effect on the signal.

Punch Level Control (PLC): An RJ-45 jack is provided for connecting an optional wired remote PLC2 (item number 575PLC2, sold separately), allowing remote control of the output level of the amplifier. A second RJ-45 jack is the PLC output, used to daisy-chain additional amplifiers controlled by a single remote.

Note: Previous model PEQ, Punch Bass, and Para-Punch remotes will not work with this amp.

 

Product reviews from the Crutchfield Labs (what are the Labs?)

Review this product
Great Gear Giveaway rewards card

Submit a review and then enter to win a $500 rewards card

Rockford Punch P600X4 Reviews

Average Customer Review:

1 people say:

Review this product:

Thanks for taking the time to share your experiences about this product. Please be sure to focus your comments on the product itself. Read our Review Guidelines for more information.

Your email won't be visible. Please use the email address that is associated with your order.
(e.g., JohnD) Your review will be signed using the display name and location
(e.g., Charlottesville, VA)

Click on a star to rate the overall product on a scale of 1-5
1500 characters left
Attach a YouTube Review
Crutchfield Video Review Guidelines
  • Only submit videos that you made or are authorized to use.
  • Do not submit videos that contain music, video or visuals that are copyrighted and belong to someone else.
  • Please see our Review Guidelines for more information.
500 characters left
500 characters left
Filter by rating:
5 out of 5

Rockford Punch P600X4

Written By Anonymous, North Augusta, SC on Thursday, May 30, 2013
Crutchfield Customer Review (What's this?)
 
Great product powers the set of component Speakers I purchased great. Sounds great and have had no problems with it at all. The clean setup was a breeze to do.
Was this review helpful?    Yes | No
 

1 question already asked

How do digital amps compare to the standard MOSFET amps in areas of power, bass attack,midrange, clean? [ Paul  Feb 07, 2014 ]
1 answer
  • We have not received any answers from other customers on your question. I would recommend reaching out to an Advisor by phone (1-800-324-9695) or online chat. They should be able to help answer your question. [ Jeff Staff  Feb 10, 2014 ]

Add accessories for the Rockford Punch P600X4

You'll need an amp wiring kit to install your new amplifier, as wiring is not included. See all categories & accessories

Rockford Fosgate RFK4X Complete 4-gauge amplifier wiring kit
Includes patch cable and speaker wire
12 people say
Your Price: $159.99
Add to Cart
Rockford Fosgate RFK4 4-gauge amplifier power wiring kit
7 people say
Your Price: $114.99
Add to Cart
Kicker PK4 4-gauge amplifier power wiring kit
Your Price: $129.99
Add to Cart
T-Spec 4RAK Installation Kit 4-gauge amplifier wiring kit — includes 2-channel patch cable and speaker wire
6 people say
Your Price: $99.99
Add to Cart
T-Spec 4PK Installation Kit 4-gauge amplifier wiring kit — includes speaker wire
3 people say
Your Price: $89.99
Add to Cart
EFX PA4BX Wiring Kit 4-gauge amplifier wiring kit — includes 2-channel patch cable
Your Price: $79.99
Add to Cart
Rockford Fosgate PLC2 Amp Remote Control For 2013-up Punch and Power Series amplifiers with C.L.E.A.N. setup system
3 people say
Your Price: $30.99
Add to Cart
T-Spec 12-gauge Speaker Wire Black/white jacket — priced per foot
24 people say
Your Price: $1.99
Add to Cart
T-Spec 16-gauge Speaker Wire Black/white jacket — priced per foot
11 people say
Your Price: $0.69
Add to Cart
Stinger PRO Series 16-gauge Speaker Wire Black jacket — priced per foot
44 people say
Your Price: $0.39
Add to Cart
7 people say
Your Price: $29.99
Add to Cart
Rockford Fosgate RFiF2SW 2-channel speaker output adapter (bare speaker wires to female RCAs)
3 people say
Your Price: $7.99
Add to Cart
T-Spec 2-Channel RCA Patch Cables Available in 7 different lengths (17-foot)
20 people say
Your Price: $19.99
Add to Cart
JL Audio XD-CLRAIC2-SW 2-channel speaker output converter (bare speaker wires to male RCAs)
12 people say
Your Price: $9.99
Add to Cart
Kicker KISL 2-channel speaker wire adapter (bare-wire connector to RCAs)
10 people say
Your Price: $12.99
Add to Cart
50 people say
Your Price: $9.99
Add to Cart
T-SPEC V8 Mini-ANL Fuses Pair of nickel-plated mini-ANL fuses (100-amp)
6 people say
Your Price: $3.99
Add to Cart
Rockford Fosgate RFFM100 MAXI Fuse Pair of 100-amp platinum-plated wafer fuses
2 people say
Your Price: $4.99
Add to Cart
T-SPEC V6-MANL Fuse Holder 4- to 8-gauge mini-ANL fuse holder
1 person says
Your Price: $9.99
Add to Cart
Rockford Fosgate RFFAGU Fuse Holder Platinum-plated AGU fuse holder
Fits 4- or 8-gauge cable
23 people say
Your Price: $10.99
Add to Cart
EFX CFHG4 Fuse Holder In-line AGU fuse holder accepts 4- to 8-gauge wire
Your Price: $9.99
Add to Cart
T-Spec Capacitor 1.5-farad capacitor with red LCD meter
8 people say
Your Price: $79.99
Add to Cart
T-Spec Capacitor 3.0-Farad capacitor with red LCD meter
5 people say
Your Price: $99.99
Add to Cart
S&G Wire Cutter/Stripper Tool Cuts and strips 12- to 22-gauge wire
13 people say
Your Price: $19.99
Add to Cart
Pro.Fit Wire Worm Installation tool helps route wiring through tight spaces
27 people say
Your Price: $12.99
Add to Cart
Metra Crimp Tool and Connectors Package contains crimp tool and over 150 pieces
15 people say
Your Price: $19.99
Add to Cart
Bojo Trim Panel Tools Set of 6 pry tools — helps remove interior and exterior trim and door panels
47 people say
Your Price: $24.99
Add to Cart
S&G Tool Aid 87650 Door Trim and Panel Removal Tool
65 people say
Your Price: $9.99
Add to Cart
Pro.Fit Hook Tool Set Installation tools — pair
8 people say
Your Price: $6.49
Add to Cart
Pro.Fit Trim Panel Tool Remove your vehicle's trim panels without damage
76 people say
Your Price: $5.99
Add to Cart
Skewdriver Pro SPK4042 Ratcheting straight and offset screwdriver set with 40 bits (Skewdriver Pro with ratchet handle, pictured)
7 people say
Your Price: $49.99
Add to Cart
Bojo Trim Panel Tools Set of 6 pry tools — helps remove interior and exterior trim and door panels
2 people say
Your Price: $29.99
Add to Cart
DEI Heat Shrink Tubing Black 4-foot length (Assortment)
5 people say
Your Price: $24.99
Add to Cart
InstallCard: Amp or Equalizer Prepaid professional amplifier or EQ installation
17 people say
Your Price: $79.99
Add to Cart
Rockford Fosgate RFK4D 4-gauge dual amplifier complete wiring kit
31 people say
Your Price: $184.99
Add to Cart
Your Price: $69.95
Add to Cart
Autosound 2000 Disc Five System Demonstration — Test CD
Your Price: $9.99
Add to Cart
Autosound 2000 Disc Two Image/Placement Test CD
Your Price: $19.99
Add to Cart
Autosound 2000 Disc Three System/Environmental Test CD
Your Price: $19.99
Add to Cart
Autosound 2000 Disc One Low Frequency Test CD (Disc One)
1 person says
Your Price: $19.99
Add to Cart
Autosound 2000 Disc Four Amplifier Optimizer Test CD
8 people say
Your Price: $9.99
Add to Cart

Why choose SquareTrade?

The #1-Rated Protection Plan

Thousands of people have reviewed SquareTrade Protection Plans — and made us #1.

5-Day Service Guarantee & Free Shipping

We'll repair or replace your item in five business days or less after we've received it, or your plan is free. And, as always, we pay for all shipping.

Protection from Normal, Everyday Use

Repairing your average mechanical or electrical failure can cost as much as buying a new device. With SquareTrade, you're covered — including parts and labor.

3 Year Protection Plan
3 Year Protection Plan
Your Price: $63.99
Add to Cart

For a more in-depth review and enhanced detailed information on the Rockford Punch P600X4, please visit the Crutchfield website product page (/ISEO-rccbcspd/p_575P600X4/Rockford-Punch-P600X4.html ).