Skip Navigation

Rockford Fosgate Prime R500-1D

Mono subwoofer amplifier — 500 watts RMS x 1 at 2 ohms

2 Reviews

Item #: 575R5001D

This item is no longer available.

Original Price: $199.99

Shop all Car Amplifiers

Add to Cart

Rockford Fosgate Prime R500-1D

Overview

Our take on the Rockford Fosgate Prime R500-1D

Giving you Rockford Fosgate performance in an incredibly small package, Rockford Fosgate's Prime R500-1D mono amp drives your subs with the clean power they need to fill your car with great bass. This Prime Series workhorse delivers up to 500 watts RMS so you will be feeling the bass. Use the low-pass filter and Rockford Fosgate's famous Punch bass boost to adjust the amp to work best with your enclosure and vehicle. A phase switch gets your subs to work together with the rest of your car's audio system for maximum impact.

Power for your bass that'll fit almost anywhere

Giving you Rockford Fosgate performance in an incredibly small package, Rockford Fosgate's Prime R500-1D mono amp drives your subs with the clean power they need to fill your car with great bass. This Prime Series workhorse delivers up to 500 watts RMS so you will be feeling the bass. Use the low-pass filter and Rockford Fosgate's famous Punch bass boost to adjust the amp to work best with your enclosure and vehicle. A phase switch gets your subs to work together with the rest of your car's audio system for maximum impact.

Performance and value

Rockford Fosgate designed Prime amps to deliver Power Output Without Excessive Regulation (POWER), which means they'll respond quickly to the peak demands that you may throw at your system. The included wired remote lets you control the amp's volume level from the front seat. Your driver's seat will become your favorite place for listening once this compact Prime amp goes to work.

R500-1D control panel

Great amp for my 2 12" Rockford. Great sound. Was way better with a cap, could really tell the difference

Tyler, United States

What's in the Box:

  • Mono amplifier with two 25A ATC fuses installed
  • 2 Spare 25A ATC fuses
  • Punch Level Control module
  • 16.5' Punch Level Control cable terminated by a male 3.5mm connector on each end
  • Mounting bracket
  • Two 3mm x 10mm Punch Level Control mounting screws
  • Four 4mm x 20mm self-tapping screws
  • 4 Flat washers
  • Installation & Operation manual

Product Highlights:

  • mono subwoofer amplifier
  • 250 watts RMS x 1 at 4 ohms (500 watts RMS x 1 at 2 ohms)
  • CEA-2006 compliant
  • variable low-pass filter (50-250 Hz, 12 dB/octave)
  • variable bass boost (0-12 dB at 45 Hz)
  • phase switch
  • wired remote Punch Level Control included
  • Class-D amplifier design
  • frequency response: 20-250 Hz
  • MOSFET power and output stages
  • preamp inputs and outputs
  • 8-gauge power and ground leads recommended — wiring and hardware not included with amplifier
  • fuse rating: 25A x 2
  • 7-11/16"W x 2-7/16"H x 7-11/16"D
  • warranty: 1 year
  • Our 60-day money-back guarantee
Reviews

Rockford Fosgate Prime R500-1D Reviews

Average Customer Review:

2 Reviews

Great amp

Tyler from United States on 6/29/2013

Crutchfield Customer Review (What's this?)

Great amp for my 2 12" Rockford. Great sound. Was way better with a cap, could really tell the difference

Pros: Great price for quality

Cons: No built in fan

Rockford Fosgate Prime R500-1D

Dustyn from Mansfield tx on 5/2/2013

Very dependable!!

Pros:

Cons:

Details

Hands-on research

Product Research

Features
Controls
Connections

Features

Overview: The Rockford Fosgate Prime R500-1D mono, Class D amplifier is designed to power subwoofers. The Class D design and extruded aluminum heatsink allows the amplifier to run cool and efficient, and results in a small footprint.

CEA 2006 Compliant: The R500-1D's power ratings are measured according to standards provided by the Consumer Electronics Association (CEA). These standards allow you to accurately compare the rated power output of all CEA 2006-compliant amplifiers, even if they come from different brands. Manufacturers who adhere to the standards can display the CEA 2006 logo on their products and packaging. CEA2006 Specifications for this amplifier are:

  • 4 Ohms: 250 watts RMS x 1 at 4 ohms, 14.4 V, and 1% THD+N
  • 2 Ohms: 500 Watts x 1 at 2 ohms, 14.4 V, and 1% THD+N

LED Indicators: The amplifier is equipped with two side-mounted LED indicators:

  • Power LED: illuminates blue when the unit is turned on.
  • Protect LED: illuminates red if a short circuit or too low of an impedance is detected at the speaker connections. The amplifier will automatically shut down if this occurs.

Mounting: The amplifier can be mounted vertically or horizontally using the supplied mounting screws. The amplifier should never be mounted in an engine compartment as this will void the warranty.

Controls

Gain Control: The amplifier's gain control is preset to match the output of most source units. The gain control can be adjusted from 1 to 11 with an input sensitivity range of 150mV to 8V.

Punch Level Control: The R500-1D includes a wired Remote Punch Level Control, which is linked to the gain control of the amplifier. The module allows you to remotely control the output level of the amplifier from the dash or center console of your vehicle. The Remote Punch Level Control features a rotary dial, and comes with mounting hardware and a 16.5' connector cable.

Low Pass Filter: The amplifier is equipped with a 12dB/octave Butterworth low-pass filter. You can adjust the low-pass frequency between 50 Hz and 250 Hz.

Phase: The 2-way phase switch allows you to select the output phase of the amplifier between 0-degrees and 180-degrees to match the rest of your vehicle's speaker system.

Punch Bass: The Punch bass control on the amplifier is adjustable from 0 (min) to 12dB (max) at 45Hz (fixed).

Connections

Power Terminals: The power and ground terminals are nickel-plated screw terminals and will accommodate up to 4 AWG power/ground wire (up to 1/2" spade or ring-style connector).

Note: Based on the 50A fuse rating and the power output of the amplifier, an 8-gauge amplifier wiring kit is recommended.

Remote Turn-On Terminal: The remote turn-on terminal is a nickel-plated screw terminal that will accommodate up to an 8 AWG wire (up 3/8" spade or ring-style connector). This terminal is used to remotely turn-on and turn-off the amplifier when +12V DC is applied, when connected to your head unit's remote turn-on lead.

Speaker Terminals: The speaker terminals are heavy duty, nickel-plated screw-terminals what will accommodate up to 8 AWG speaker wire (up to 3/8" spade or ring-style connectors). There are two pairs of speaker terminals which are paralleled internally. This allows you to connect a single 4-ohm or a single 2-ohm subwoofer, or two 4-ohm subwoofers.

RCA Input Jacks: The industry standard RCA jacks provide an easy connection for signal level input. They are nickel-plated to resist signal degradation caused by corrosion.

RCA Output Jacks: A pair of RCA pass-thru jacks provides a convenient source for daisy-chaining an additional amplifier without running an extra set of RCA cable from the front of your vehicle to the rear amplifier location.

Fuses: The amplifier is equipped with two installed 25-amp ATC fuses. The amplifier also comes supplied with two spare 25-amp fuses.

Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.

Accessories
Library