Rockford Fosgate Prime R750-1D
Mono subwoofer amplifier 750 watts RMS x 1 at 1 ohm
Item #: 575R7501D
Your price: $269.99 Earn up to 270 Rewards points
Our experts help you pick the ideal gear for your needs.Meet our advisors
Free tech support for the life of your gear.Read about our one-on-one expert help
You may return items that are complete and like new for any reason within 60 days.See the details of our return policy
Earn one point for every dollar you spend and use those points to save on future purchases.Get full details on Crutchfield Rewards
Our customers have trusted us with their business, and they’ve helped us win awards for our service.Check out our most recent awards
The manufacturer’s warranty always applies.See more details
Item #: 575R7501D
Your price: $269.99 Earn up to 270 Rewards points
Rockford Fosgate packs more power per square inch into their Prime Class D amps than almost any other amplifier made, so you can put more music power in your vehicle's limited space. Your bass will hit loud and clear with one of these reliable and cool-running amps. The versatile R750-1D puts out 400 watts RMS to a 4-ohm sub, but will crank out 750 watts RMS when it's running a 1-ohm subwoofer setup.
Clean power, extensive controls
Rockford Fosgate designed this Prime amp to deliver Power Output Without Excessive Regulation (POWER), which means it'll respond quickly to the peak demands that you may throw at your system. Low-pass and subsonic filters, along with Rockford Fosgate's famous Punch bass boost, let you tune your subs for maximum performance, so your driver's seat will become your favorite place to pick up the beat. And, speaking of the driver's seat, you can hook up an optional wired remote knob to get fingertip control over this amp's bass impact.
You might think you don't need an amp because you have a 400-watt system in your car, or because your new stereo puts out 50 watts a channel. But those are peak wattage ratings, which may boil down to 15 or 20 watts per channel, using the more realistic RMS rating. An amp sends your speakers the power they need to deliver your music with clarity and impact, whether you're using factory speakers or high-performance components. And low-frequency reproduction requires lots of power, so an amp is an absolute must if you're adding a sub to your system.
This amp delivers the certificate says 880 rms at 1 ohm! Hooked it up to a rockford fosgate p3d2 12 and it sounds amazing. Crutchfield had super fast shipping and awesome service!
Pros: Plenty of power, looks clean, small so easy install, runs cool
Great little amp, I was impressed by the small footprint (This is my first D-class mono block amp). Only been using it for a few weeks now. Originally set the gain to roughly 10% and came back later to tune it. Set the gains to max clean output (roughly 30% turned). Using it with a Fosgate T0D212 @ 1ohm (700W RMS) in a ported box. Worlds better than my little 250W RMS amp/sub I had previously. Certificate in the box says my unit was rated at 870W. Its a great way to discover new rattles you never knew about, ha. I chose this one over the Power line 1000W after watching Steve Meade's Amp Test Tuesday youtube video; Half the price and still is a good bang-for-your-buck.
Pros: Great power, small footprint.
Cons: I wish it had the better inputs like the Power series; Im tired of these 45-degree angled-down connectors.
I was very surprised. I was very leery with this purchase. I have never been a fan of Fosgate before due to overheating and lack of response and muddy sound. This was the only amp that i could find that had the required rms power i needed for my 2 - 12" phoenix gold r3. (400rms - 800pk ea) that was of any sort of quality. everything else was too big or too small. I figured that it would be good to stay under the 800 rms by 50 watts (due to a bad habit of mine of burning voice coils to flaming balls). when it showed up, i was even more leery of the size of it........ very small footprint.... i thought to myself..... 'oh great.... another fosgate going overheat and burn out on me with nothing but problems.....' I went ahead an hooked it up, and WOW...... instantly i was very excited (still leery of overheating). I decided to take a drive around the island, about 285 miles give r take, and ran it full capacity, full rms, full volume. at first, i started smelling voice coils..... ugh oh.... turned the gain down a bit feeling a little disappointed. when i got back it ran the entire time, just nice and warm, not smoking hot like my others, and stuck it on a friends dyno.... 889 RMS WATTS @ 1 ohm ! Buhya! all in all i am very please with this amp. it responds very well between extreme high/low frequencies quickly, very clean sound, and Way more power than i was expecting. Highly recommended to anyone looking for easy on pocket, but still good and reliable. thank you fosgate...
Pros: Cool running, high power, good response, small package, 1 ohm stable, a true beautiful product. better than punch series.....
Cons: its very nice to see an amp put out More watts than advertised for once..... but would be good to know it was capable to do so before getting tuned in. not all of us have a dyno, and if i wouldnt have been a hobbyist, i would have quickly burned up some brand new subs.... but still... Thank You! It's all about the base!
Awesome amp recommended by my installer to power 2 12" kicker comp r @1 ohm and used with 3sixty fosgate line driver to put input voltage at 4 volt.Great setup.....
Pros: Small case , 1 ohm stable , bass nob included, cost
Great power for a great price.
Pros: Easy installation.
Cons: Nothing that I can think of.
Awesome amp, for the price and the name. Easily powers two 400 watt CompV subs. Controls on the amp allow for super easy sound adjustment. Bought it about two years ago and would buy again if I had to.
Pros: Small and compact but with huge power.
|RMS Power Output (Watts x Channels)||
250 x 1
|Peak Power Output (Watts x Channels)||N/A|
|Power at 2 Ohms (Watts x Channels)||500 x 1|
|Bridged Power (Watts x Channels)||N/A|
|Minimum Impedance Bridged||N/A|
|Minimum Impedance Unbridged||1|
|Best Frequency Response||20-250 Hz|
|THD at Rated RMS Power||1%|
|Signal to Noise Ratio||75 dB|
|Low-Pass Crossover Frequency||50-250 Hz|
|Low-Pass Slope (dB/octave)||12 dB/oct|
|High-Pass Crossover Frequency||N/A|
|High-Pass Slope (dB/octave)||N/A|
|Bass Boost||0-18 dB|
|Bass Boost Frequency||45 Hz|
|Speaker Level Inputs||No|
|Preamp Outputs||1 pair|
|Parts Warranty||1 Year|
|Labor Warranty||1 Year|
Overview: The Rockford Fosgate Prime R750-1D is a mono Class D amplifier. It is optimized to power subwoofers, and 1-ohm stable. The Class D design is very efficient with a cast aluminum heatsink to keep it in a small footprint. The amplifier has 85% average efficiency at 4-ohms or 2-ohms, and 80% at 1-ohm.
CEA 2006 Compliant: The R750-1D's power ratings are measured according to the strict standards dictated by the Consumer Electronics Association (CEA). These standards allow you to accurately compare the rated power output of all CEA 2006-compliant amplifiers, even different brands. Manufacturers who adhere to the standards can display the CEA 2006 logo on their products and packaging. The RMS power output is as follows (measured with a 14.4 volt input, <1% THD+N, 20 Hz-250 Hz):
LED Indicator: The amplifier is equipped with a top-mounted LED indicator which illuminates blue when the unit is turned on. The LED illuminates red when a protection circuit engages (short circuit or too low an impedance is detected at the speaker connections). The amplifier automatically turns off if this occurs.
Mounting: The amplifier can be mounted vertically, horizontally, or inverted using the supplied mounting screws; horizontal mounting (right side up) will provide the best cooling.
Controls: The R750-1D has the following top-mounted controls:
Remote Punch Level Control: The amplifier includes a wired Remote Punch Level Control, which is linked to the gain control of the amplifier. The module allows you to remotely control the output level of the amplifier from the dash or center console of your vehicle. The Remote Punch Level Control features a rotary dial, and comes with mounting hardware and a 16.5' connector cable.
Terminals: The amplifier features heavy duty, nickel-plated set-screw terminals. The set screws can be tightened or loosened with the supplied 3mm Allen wrench. The terminals include:
Fuses: The amplifier does not have on-board fuses. A 60A fuse should be placed on the power wire within 18" of the battery.
RCA Input Jack: The RCA input jacks are nickel-plated to resist signal degradation caused by corrosion.
RCA Pass-Thru Jacks: The nickel-plated RCA pass-thru jack provides a convenient source for daisy-chaining an additional amplifier without running an extra set of RCA cables from the front of the vehicle to the amplifier location.
To add to factory installed amp [ Kervin Dec 26, 2015 ]
To pair with the RF P2-2X12 speakers [ CHARLES Dec 17, 2015 ]
The Fosgate amp was suggested by the Crutchfield technical support representative as a reasonable mid price range amp that supported the duel 12" subwoofer speaker selection. [ Howard Dec 05, 2015 ]
Speaker Terminals: will accommodate up to 8-gauge wire. Two Positive (+) and Negative (-) terminals are provided for installation flexibility. Both terminals are wired in parallel internally. The right way to get to 2-ohms will depend on your subwoofer set-up. For information on selecting the best amp for your subs I would recommend reaching out to an Advisor by phone (1-800-324-9695) or online chat. They will be able to help determine the differences between the amp models and help you make the best choice for your system. [ Jeff Feb 17, 2014 ] Staff