Onkyo M-5000R

Stereo power amplifier

Outlet: Open Box

Item #: 580M5000R

Low Stock

2 Reviews | 1 question - 1 answer

Was:$2,499.99

Outlet Savings:-$250.00

Your price: $2,249.99 Earn up to 2,250 Rewards points

Add to Cart Free Shipping Lifetime Tech Support

+ Add to wishlist + Email me alerts for this product

Scratch & Dent: $2,124.99

View all associated offers

More than meets the eye

The Onkyo M-5000R power amp

The Onkyo M-5000R power amp: all that power and good looks too

If you've been looking at other power amps here you've probably noticed that our descriptions are pretty spare most of the time. That's because not much moves or needs controlling on a power amp. But I'm going to break with tradition a bit for the Onkyo M-5000R. It's got so many good things going for it that they deserve to be called out. Bear with me.

First of all, and probably least important to the performance, it's got a lovely set of power meters on the front panel that add to the unit's overall attractiveness, and foreshadows the fine build quality you'll discover as we dig a little deeper.

Power enough for nuance and thunder

An amplifier's power rating can only tell you so much. What's even more important is how well it controls the power it purports to deliver. The M-5000R doesn't disappoint. Two massive toroidal transformers feed four 27,000 microfarad storage capacitors to create a reservoir of clean, instantly available power for your demanding stereo sources. Sudden violin bowing attacks, slamming kick drums, fat synth bass lines, a stabbing horn riff — all are faithfully re-created with all their intended impact.

Errors will not be tolerated

The M-5000R is carefully crafted to minimize any errors that might detract from your musical enjoyment. Onkyo's acclaimed AWRAT technology (Advanced Wide Range Amplifier Technology) incorporates innovations like dynamic distortion reduction, closed ground-loop circuit design, and symmetrical twin-monaural construction to keep your music free from the most common sources of signal degradation.

Kick it up a notch

Need even more pristine power? Consider getting two M-5000Rs and running them each in mono mode. With a pro-grade XLR feed from your preamp to the Bridge-Tied Load  (BTL) input on each amp, you'll be sending 180 extra-clean watts on both channels. That extra dynamic range will let your music's passion and energy shine through every time.

Product Highlights:

  • AWRAT (Advanced Wide Range Amplifier Technology) stereo power amplifier
  • 80 watts per channel into 8 ohms (20-20 kHz at 0.05% THD)
  • 150 watts per channel into 4 ohms (20-20 kHz at 0.05% THD)
  • XLR mono "Bridge" input enables unit to be run in mono at 180 watts x 1 into 8 ohms
  • frequency response: 10-100,000 Hz/0dB, -1 dB (1W)
  • signal-to-noise ratio: 110 dB
  • RCA inputs for each channel; mono XLR input
  • quad push-pull amplification design with 3-stage inverted Darlington circuitry to reduce distortion
  • two massive toroidal power transformers and four 27,000-microfarad capacitors for stable, instantly available high current
  • closed ground-loop circuits keep individual circuit noise and ground potential interference to a minimum
  • totally symmetrical alignment of power devices for left and right channels reduces chance for stereophonic playback errors
  • 12V DC trigger input/output
  • gold-plated binding post speaker terminals
  • detachable power cord
  • 17-1/8"W x 7-7/16"H x 17-1/16"D
  • weight: 51.8 lbs.
  • warranty: 2 years
  • Our 60-day money-back guarantee

Hands-on research

What's in the box?

Download owner's manual

  • Stereo power amplifeir
  • 6' AC power cord
  • 6' Mono-minijack cable
  • Instruction Manual (En)
  • Instruction Manual (Fr/Sp)
  • Product Registration/Warranty Information

Product Research

Features

Stereo Power Amplifier: The Onkyo M-5000R Stereo Power Amplifier is rated at 80 watts (into 8-ohms, at 20-20k, with 0.05%, driving 2 channels) or 150 watts (into 4-ohms, at 20-20k, with 0.05%, driving 2 channels).

Quad Push-Pull Amplification Design (w/ 3-Stage Inverted Darlington Circuitry): The Onkyo M-5000R power amplifier employs an efficient quad push-pull amplification design. Quad push-pull amplification uses two extra transistors on each channel to separately amplify the positive & negative halves of the waveform. Meanwhile, 3-Stage Inverted Darlington Circuitry helps reduce distortion at the output stage. Together with the  push-pull amplifier design, the 3-stage inverted Darlington Circuitry shapes a clean, consistent signal to send to the outputs for ultra-low distortion & greater sound quality.

AWRAT (Advanced Wide Range Amp Technology): Onkyo's advanced AWRAT design for power amplification comprises the following technologies to ensure optimal audio performance..

  • DIDRC (Dynamic Intermodulation Distortion Reduction Circuitry): Since the advent of digital audio, signal-to-noise ratios have improved dramatically. However, the S/N ratio reflects static noise only, and takes no account of another type of noise that occurs as the byproduct of sound reproduction; dynamic noise. To reduce this type of noise, Onkyo has developed DIDRC technology. Despite being beyond the normal range of human hearing, frequencies above 100 kHz are susceptible to clock pulse and other forms of distortion from digital devices. Such distortion in the super-high-frequency range can generate "beat interference", which in turn affects the character of the original sound. By improving linearity and reducing distortion in the super-high frequency range, Onkyo's new DIDRC technology effectively reduces perceptible noise and delivers clearer, truer audio.
  • Low NFB (Negative-Feedback Design): Too much NFB makes a system susceptible to counter-electromotive force from the speakers, resulting in a drop in perceived sound quality. To avoid this, Onkyo focuses on improving the frequency response and reducing distortion, without relying so much on NFB.
  • Closed Ground-Loop Circuits: AWRAT amplifiers employ a sophisticated closed-circuit design in which each circuit has a separate link to the power supply. This helps to cancel individual circuit noise and keep the ground potential free of distortion.
  • HICC (High Instantaneous-Current Capability): HICC enables an AWRAT amplifier to immediately cancel the speakers' reflex energy and instantaneously send out the next signal. The same high current required to achieve this also supports the amplifier's ability to handle speaker impedance fluctuations.
  • Symmetrical Twin-Monaural Construction: Power devices for the left and right channels of an AWRAT amplifier is aligned symmetrically. Each channel has the same electrical and structural design, and signal pathways are uniform in length. This helps to minimize errors in stereophonic playback.

New Circuit Board Construction w/ Internal Struts to Reduce Vibration: Rather than being directly connected to the chassis base, the circuit boards inside the M-5000R are cushioned by internal struts and affixed to the front, side, and rear panels. This method of construction prevents vibrations from the chassis from adversely affecting the circuit boards

Separate Panel Construction: The M-5000R features separate aluminum panels for the top, sides, and front to reduce unwanted vibrations caused by internal resonance. Compared to a one-piece chassis design, this construction method offers greater rigidity and improved noise reduction.

Two Massive Toroidal Transformers w/ Sub Transformer: The M-5000R incorporates two massive toroidal transformers that reduce magnetic flux leakage, improve efficiency, and keep the power supply stable. Also on-board are a sub-transformer and four 27,000 microfarad capacitors that work to make the current significantly smoother.

Power Meter: The front-panel power meters show the output power level of each of the amplifier's two channels. The large power meters have been designed so that the indicator needles move up to the peak level quickly and then return more slowly. This make it easier to read transient power levels which last for only a fraction of a second.

Balanced XLR Input for Monural Amplification (in BTL mode): The M-5000R offers the audiophile possibilities of BTL (Bridge-Tied Load) through its pro-grade XLR input. You can use the BTL feature in conjunction with a compatible pre-amp and a second M-5000R power amp to double the power output for left and right channels.

Stereo RCA Inputs: The Onkyo M-5000R  is fitted with a set of gold-plated, machined brass stereo RCA inputs to connect to an external preamplifier (such as the Onkyo P-3000R, sold separately). You cannot connect the amp's stereo RCA inputs and balanced XLR input as the same time (this may damage the amplifier).

Binding Post Speaker Terminals: The Onkyo M-5000R power amplifier features four gold-plated binding-post speaker terminals to connect a pair of loudspeakers. The binding-post speaker terminals will accept bar wire (up to 10AWG), pin-connectors, spade-lugs, and banana plugs (single only). The power amplifier supports speakers from 4-ohm to 16-ohm.

12V Trigger Input/Output: The 12V trigger input/output jacks (3.5mm) enable the amplifier to turn-on and go into standby mode based on the standby status of the connected component, also featuring a 12V trigger jack.

Auto Standby: The power amplifier will automatically enter Standby mode if the amp receives not signal for approximately 3 hours.

Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team — they open the box, verify contents, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.

Onkyo M-5000R Reviews

Average Customer Review:

2 reviews
Review this product
Great Gear Giveaway

Submit a review and then enter to win a $500 rewards card

(0)
(0)
(0)
(0)
(0)

Review this product:

Thanks for taking the time to share your experiences about this product. Please be sure to focus your comments on the product itself. Read our Review Guidelines for more information.

Your email won't be visible. Please use the email address that is associated with your order.
(e.g., JohnD) Your review will be signed using the display name and location
(e.g., Charlottesville, VA)

Click on a star to rate the overall product on a scale of 1-5
1500 characters left
  Attach a YouTube Review
Crutchfield Video Review Guidelines
  • Only submit videos that you made or are authorized to use.
  • Do not submit videos that contain music, video or visuals that are copyrighted and belong to someone else.
  • Please see our Review Guidelines for more information.
500 characters left
500 characters left

This amp is the real deal

Written By Hank N, Nashville on Thursday, October 03, 2013

I finally bit the bullet and bought one of these amps to replace my Yamaha a-s500 (which is great). I just couldn't stop drooling over how it looks with those meters on the front! Also, the curiosity of how something top of the line that weighs 52 pounds would sound compared to my 400 dollar yamaha.

To be brief, it sounds great. I'm using my onkyo 9050's preouts fyi. I can't afford the p 3000 preamp that was made to go with this.... yet. The difference in sound is noticeable but not mind blowing. Everything is tighter and clearer. Cleaner. Especially lower end sound which has a tendency to sound loose on the yamaha by comparison. Even at mild volumes the sound is noticeably clearer. I hooked several speakers to this amp and my opinion of these speakers changed after listening through this setup (jbl studio 530s, Definitive studio monitor 55s, and Martin Logan Motion 12s). Overall the change in the sound of the 530's was most impressive. The imaging on these things is killer. Detailed too. But this is off topic....

The fit and finish of this amp is....amazing. It looks better than the pictures. The heavy duty speaker posts on the back are really nice too. I can't say its has 4 times better sound of the yamaha compared to the price, but it looks 10 times better! And, like most of high end gear, there is that diminishing returns thing you must think about. Oh yeah, I don't know what the other guy is talking about with the one star review....

Pros: Appearance, Sound, Quality,

Cons: None

Disappointing

Written By AnthonyN, Washington DC on Tuesday, December 25, 2012

I was so disappointed by this amp. My Onkyo M-282 appears much better than the M-5000R. The M-5000R seemed not to have enough power. 80 watts is the maximum before the sounds weakens in my opinion. The Onkyo M-282 is an incredible value and sound performance, warm, dynamic, musical, bass punchy and crisp. I was mislead by the reviews and weight of M-5000R.

Get everything you’ll need to enjoy your new Onkyo M-5000R

Don't let your speaker wire be a weak link in your system.
You'll need speaker wire to get the signal from your new receiver to your speakers. UL-listed wire is specifically designed for in-wall installation.
Better cables weed out noise for more pristine sound.
Use balanced audio cables for the best sound quality.
Protect your investment from power surges and interference.
Make the speaker hook-ups easy with connectors.
Have your new equipment installed by qualified professionals.
If you're using a home theater pre-amp, a better subwoofer cable will give your subwoofer the tools it needs to recreate the deep bass in your music and movies.
AudioQuest Type 4

AudioQuest Type 4

Speaker cables with pre-attached banana connectors (10-foot pair)

Item #: 703T410BFS

(22)

$248.99
Add to Cart
AudioQuest Type 4

AudioQuest Type 4

Single center speaker cable with pre-attached banana connectors (10 feet)

Item #: 703T410CTR

(8)

$124.49
Add to Cart
AudioQuest Rocket 88

AudioQuest Rocket 88

Speaker cables with pre-attached banana plugs (10-foot pair)

Item #: 703R88FR10

$898.99
Add to Cart
AudioQuest Rocket 33

AudioQuest Rocket 33

Bi-wire speaker cables with pre-attached banana plugs (15-foot pair)

Item #: 703R33BW15

(12)

$413.99
Add to Cart
Original Monster Cable

Original Monster Cable

With gold pin connectors (15-foot pair)

Item #: 119OMC1515

(39)

$39.99
Add to Cart
Monster Cable SuperFlat™ Mini

Monster Cable SuperFlat™ Mini

Decor-friendly speaker cable with gold pin connectors (50-foot spool)

Item #: 119SFLM50

(26)

$34.95
Add to Cart
AudioQuest X2 Speaker Cable

AudioQuest X2 Speaker Cable

14-gauge cable, connectors optional (30 feet, Gray)

Item #: 703X230G

(27)

$58.99
Add to Cart
AudioQuest G2 Speaker Cable

AudioQuest G2 Speaker Cable

16-gauge cable, connectors optional (30 feet, Gray)

Item #: 703G230G

(19)

$38.99
Add to Cart
Monster XPHP™ MKII

Monster XPHP™ MKII

Speaker cable with clear jacket (100 feet)

Item #: 119XPHP100

(10)

$99.95
Add to Cart
Monster XP®

Monster XP®

Speaker cable with clear jacket, connectors optional (100 feet)

Item #: 119XPMS1H

(52)

$64.95
Add to Cart
Monster XP® Navajo White MkII

Monster XP® Navajo White MkII

Speaker cable (50 feet)

Item #: 119XPNWS50

(2)

$39.95
Add to Cart
AudioQuest FLX-14/4 14-Gauge 4-Conductor In-Wall Speaker Cable

AudioQuest FLX-14/4 14-Gauge 4-Conductor In-Wall Speaker Cable

UL-approved for in-wall use; direct-burial rated (125 feet)

Item #: 703144125

(2)

$219.99
Add to Cart
AudioQuest FLX-16/2 16-Gauge 2-Conductor In-Wall Speaker Cable

AudioQuest FLX-16/2 16-Gauge 2-Conductor In-Wall Speaker Cable

UL-approved for in-wall use; direct-burial rated (125 feet)

Item #: 703162125

(28)

$99.99
Add to Cart
AudioQuest FLX-16/4 16-Gauge 4-Conductor In-Wall Speaker Cable

AudioQuest FLX-16/4 16-Gauge 4-Conductor In-Wall Speaker Cable

UL-approved for in-wall use; direct-burial rated (125 feet)

Item #: 703164125

(7)

$159.99
Add to Cart
AudioQuest Golden Gate

AudioQuest Golden Gate

Stereo interconnect cable with RCA plugs (0.6 meter/2 feet)

Item #: 703GGRR06M

(17)

$64.99
Add to Cart
AudioQuest Big Sur

AudioQuest Big Sur

Stereo interconnect cable with RCA plugs (0.6 meter/2 feet)

Item #: 703BSRR06M

(4)

$96.99
Add to Cart
AudioQuest Sydney

AudioQuest Sydney

Stereo interconnect cable with RCA plugs (0.6 meter/2 feet)

Item #: 703SDRR06M

(6)

$154.99
Add to Cart
AudioQuest Columbia

AudioQuest Columbia

Stereo interconnect cables with RCA plugs (1-meter/3.3 feet)

Item #: 703CMB1MR

(1)

$494.99
Add to Cart
Monster Cable Stereo Audio 200i

Monster Cable Stereo Audio 200i

Stereo interconnect cables with RCA plugs (1 meter/3.3 ft.)

Item #: 119MC2001M

(15)

$19.95
Add to Cart
AudioQuest Evergreen

AudioQuest Evergreen

Stereo interconnect cable with RCA plugs (0.6 meter/2 feet)

Item #: 703EGRR06M

(40)

$31.99
Add to Cart
Monster Cable Stereo Audio 400i

Monster Cable Stereo Audio 400i

Stereo interconnect cables with RCA plugs (1 meter/3.3 ft.)

Item #: 119MC4001M

(7)

$39.95
Add to Cart
AudioQuest Columbia

AudioQuest Columbia

Audio interconnect cables with XLR plugs (pair) (2-meter, 6.6 feet)

Item #: 703CMB2MX

$644.99
Add to Cart
Panamax M5300-PM

Panamax M5300-PM

Power line conditioner and surge protector

Item #: 299M5300PM

(15)

$539.99
Add to Cart
Panamax M5400-PM

Panamax M5400-PM

Power line regulator and surge protector

Item #: 299M5400PM

(6)

$739.99
Add to Cart
Furman Elite-15 PFi

Furman Elite-15 PFi

Power line conditioner and surge protector

Item #: 756ELT15PF

(11)

$699.00
Add to Cart
Panamax MX5102

Panamax MX5102

Home theater power management with surge protector and battery backup

Item #: 299MX5102

$649.99
Add to Cart
Panamax MB1000

Panamax MB1000

Uninterruptible power supply (UPS), voltage regulator, and surge protector

Item #: 299MB1000

$799.99
Add to Cart
Panamax MR4000

Panamax MR4000

Power line conditioner and surge protector

Item #: 299MR4000

(1)

$199.99
Add to Cart
Panamax MR4300

Panamax MR4300

Power line conditioner and surge protector

Item #: 299MR4300

(3)

$299.99
Add to Cart
Panamax MR5100

Panamax MR5100

Power line conditioner and surge protector

Item #: 299MR5100

(1)

$439.99
Add to Cart
Monster Twist-on Mini Banana Connectors

Monster Twist-on Mini Banana Connectors

2 pair, 16-gauge

Item #: 119MTTMH2

(12)

$11.95
Add to Cart
Monster Twist-on Banana Connectors

Monster Twist-on Banana Connectors

2 pair, 12-gauge

Item #: 119MTTRH2

(4)

$15.95
Add to Cart
Monster Cable Twist-on Angled Gold Pins

Monster Cable Twist-on Angled Gold Pins

4 pair, 12-gauge

Item #: 119AGPTRH2

(9)

$13.95
Add to Cart
Monster XP Mini Twist-on Pin Connectors

Monster XP Mini Twist-on Pin Connectors

4 pair, 16-gauge (4 pair)

Item #: 119GPTMH

(14)

$11.95
Add to Cart
Monster crimp-on mini bananas

Monster crimp-on mini bananas

1 pair, 16-gauge

Item #: 119MTMB

(5)

Monster crimp-on banana connectors

Monster crimp-on banana connectors

1 pair, 12-gauge

Item #: 119MTRB

(4)

Wiremold CableMate™ Cord Organizer (CMK90)

Wiremold CableMate™ Cord Organizer (CMK90)

Conceal computer or home entertainment cables

Item #: 717CMK90

$26.99
Add to Cart
Wiremold CordMate® Cord Organizer (CMK10)

Wiremold CordMate® Cord Organizer (CMK10)

Conceal audio/video cables along your walls

Item #: 717CMK10

$24.49
Add to Cart
Wiremold Flat Screen TV Cord Cover (CMK30)

Wiremold Flat Screen TV Cord Cover (CMK30)

Conceal your wall-mounted TV's audio/video cables

Item #: 717CMK30

(17)

$21.49
Add to Cart
Wiremold CornerMate™ Cord Organizer (CMK40)

Wiremold CornerMate™ Cord Organizer (CMK40)

Conceal audio/video cables in a corner

Item #: 717CMK40

(1)

$26.99
Add to Cart
Sanus NFA245

Sanus NFA245

5-shelf audio component rack (Mocha)

Item #: 051NFA245M

(20)

$299.99
After $30.00 Savings
Add to Cart
BDI Mirage 8222

BDI Mirage 8222

Audio/video cabinet

Item #: 6318222

$1,099.99
Add to Cart
Sanus CFR2136

Sanus CFR2136

70"-tall steel component rack with heavy-duty casters

Item #: 051CFR2136

(1)

$1,099.99
Add to Cart
Sanus CFR2127

Sanus CFR2127

55"-tall steel component rack with heavy-duty casters

Item #: 051CFR2127

(4)

$749.99
Add to Cart
Sanus CFR2115

Sanus CFR2115

34"-tall steel component rack with heavy-duty casters

Item #: 051CFR2115

(2)

$529.99
Add to Cart
Sanus CFR1620

Sanus CFR1620

Modular open-frame component rack

Item #: 051CFR1620

(2)

$229.99
Add to Cart
Sanus CFR1615

Sanus CFR1615

Modular open-frame component rack

Item #: 051CFR1615

(7)

$199.99
Add to Cart
Sanus CFR2144

Sanus CFR2144

85"-tall steel component rack with heavy-duty casters

Item #: 051CFR2144

(1)

$1,299.99
Add to Cart
Bell'O ATC402

Bell'O ATC402

Audio/video component cabinet, no-tools assembly

Item #: 494ATC402

(22)

$399.99
Add to Cart
Sanus Cadenza53

Sanus Cadenza53

53" component rack (Charcoal)

Item #: 051CZA53CC

$1,199.99
Add to Cart
Russound SDB-2.1

Russound SDB-2.1

2-pair speaker and source selector with volume control

Item #: 543SDB21

(1)

$199.00
Add to Cart
Russound AB-2.2

Russound AB-2.2

Tabletop A/B selector

Item #: 543AB22

(4)

$79.00
Add to Cart
AudioQuest NRG-2

AudioQuest NRG-2

High-quality replacement AC power cable (6 ft.)

Item #: 703NRG26F

(8)

$168.99
Add to Cart
Monster Cable® 400sw2

Monster Cable® 400sw2

Subwoofer cable (24 feet)

Item #: 119140712

$89.99
Add to Cart

Questions & Answers Ask the community. Share your knowledge.

1 question already asked

We only show one damping factor listed in our specs and it is 130 (1kHz, 8 ohm) [ Jeff  Dec 17, 2013 ]  Staff