About the Directed XpressStart 4X10
Remote start your engine with your car's remote
Remote start your engine with your car's remote
Directed's XpressStart 4X10 Series module lets you start your vehicle remotely by pressing the lock button on the key three times. The 4X10 incorporates a digital interface that communicates directly with your vehicle's computer to bypass the normal security safeguards, so you can take control from a distance. You can pre-warm your car in the winter and pre-cool it in summer so it'll be just right when you get in. Once you install this module, you'll be able to start your car from as far away as your key will lock and unlock your doors.
Important Note: Because of safety concerns, we strongly recommend professional installation for remote start systems in vehicles with manual transmissions.
Increase the range with an optional remote system
If you need to start your car from a greater distance, Directed offers four extended-range options:
- Viper 9656V RF Kit: 5-button 1-way remote with 1/2-mile range
- Viper 9211V RF Kit: 1-button 2-way remote with 1/2-mile range
- Viper 9856V RF Kit: 5-button 2-way LED remote with 1-mile range
- Viper 9756V RF Kit: 5-button 2-way LCD remote with 1-mile range
Each kit comes with a spare 1-way remote, a control center module, and harness. In most cases you'll be able to add features like Silent Lock/Unlock, Car Finder, and Timer Start, as well as the ability to pop open the trunk or run the defogger remotely (relay may be required). The 5-button remotes have four auxiliary channels, so you can control other available functions like rear interior lighting and sliding doors in some vehicles.
Even farther with a SmartStart smartphone interface
The 4X10 works with all SmartStart modules, allowing you to start your car through your smartphone when you're in range, or to use the SmartStart service plan to remote start from any place in the world where you have cell phone service.
IMPORTANT:
If you know how to use a multimeter and have experience working with your vehicle's electrical system, you should be able to install this remote start system yourself. If not, please consider having your system professionally installed by purchasing an InstallCard.
To ensure vehicle compatibility, please enter your vehicle information in OutfitMyCar. Your order will be reviewed by our Car Experts group, who will contact you if further information or recommended accessories are needed.
Crutchfield carries Vehicle Installation Harnesses for a wide variety of vehicles, which will allow for a much faster installation of this Directed XpressStart system.
Product highlights:
- remote start system
- uses factory key to start vehicle remotely
- remote start function is for fuel injected, diesel, and hybrid vehicles with automatic transmissions
- manual transmission mode works with select vehicles
- vehicle-specific harnesses simplify and speed installation
- some vehicles may require the MC501 high current relay pack in order to enable remote starting
- works with optional Viper systems to increase range
- Viper 9656V RF Kit 1-way remote system with 1/2 mile range
- Viper 9211V RF Kit 2-way remote system with 1/2 mile range
- Viper 9856V RF Kit 2-way LED remote system with 1 mile range
- Viper 9756V RF Kit 2-way LCD remote system with 1 mile range
- compatible with all SmartStart smartphone modules
- warranty: limited lifetime
- MFR # 4X10
What's in the box:
Directed XpressStart 4X10 owner's manual
- Directed 4x10 Digital Remote Start system
- HARK-D2P package (contains 26" harness with 16-pin black plug / 26" harness with 18-pin white plug / 2-way switch with 24" harness and 2-pin black plug; contains 28" harness with 12-pin white plug and in-line 5A and 10A ATO fuses; contains 26" harness and 7-pin white plug)
- MS-RSRC package (contains hood pin switch assembly / 58" bare wire / female quick slide / Warning sticker)
- Guide sheet
Customer reviews for Directed XpressStart 4X10
Loading...
Loading reviews...
Average review:
3.0 out of 5 starsThanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Directed XpressStart 4X10
Features & specs
Lines of Defense | ||
---|---|---|
Alarm | N | |
Pager Warning | No | |
Scan-resistant Remote Codes | No | |
Battery Backup | No | |
Trigger Methods | ||
Glass Break Sensor | No | |
Accessory Pins | No | |
Current Sensing | No | |
Operations | ||
Arming Method | N | |
Included Remotes | None | |
Number of Remote Buttons | N/A | |
Number of Remote Functions | 1 | |
Two-way Remote | No | |
Smartphone Integration | Optional 607VSM300 | |
Factory Security Integration | No | |
Number of Cars | 1 | |
Hood/Trunk Release | No | |
Remote Door Locks | Yes | |
Remote Start | Yes | |
Manual Transmission Compatible | Yes | |
Valet Switch | Yes | |
Manual Override | Yes | |
Delayed Operations | ||
Entrance | No | |
Exit/Last Door | No | |
Reset/Trigger | No | |
Rearm/Disarm | No | |
Number of Zones | 0 | |
Warranty | ||
Parts Warranty | Limited Lifetime | |
Labor Warranty | Limited Lifetime |
Product Research
Features
Overview: This XpressStart 4x10 Digital Remote Start System from Directed Electronics is an all-in-one system that covers over 95% of vehicles on the road today. Numerous T-harnesses that integrate into your vehicle's factory wiring are available to make installation much easier and quicker. In addition to your factory remote, the 4x10 can be controlled by optional long-range remotes, and SmartStart for your smartphone.
Programming: The 4x10 is a digital system and requires an internet connection to configure the module. The online configuration wizard allows you to select the remote control you desire, set and change features, enable and disable functions, change display icons, and set up the auxiliary channel.
Optional T-harnesses: The XpressStart 4x10 remote start module has multiple ports for optional T-harnesses that will integrate the system into your factory wiring. These optional harnesses are available for the following vehicle makes:
- THCHC1: Chrysler, Dodge/Ram, Jeep, Volkswagen
- THCHC2: Chrysler, Dodge/Ram, Jeep, Mitsubishi
- THCHC3: Chrysler, Dodge/Ram, Jeep
- THTLC12: Lexus, Toyota
- THFC1: Ford
- THGM610C: Buick, Cadillac, Chevrolet, GMC, Hummer, Saturn
- THNISS3C: Nissan, Infiniti
Note: To see which harness is compatible for your vehicle, please consult the Crutchfield Car Selector.
Optional Remote System: Optional RF remote systems can be added to the 4x10 to give you an extended range:
RF Kit | Remote Range | Type of Remote |
---|---|---|
Model 9211V | 1/2 mile | One 2-way 2-button LED remote + one 1-way 1 button remote |
Model 9656V | 1/2 mile | Two 1-way 5-button remotes |
Model 9756V | 1 mile | One 2-way 5-button LCD remote + one 1-way 5-button remote |
Model 9856V | 1 mile | One 2-way 5-button LED remote + one 1-way 5-button remote |
Optional SmartStart: With the optional VSM200 SmartStart module, or the VSM250 SmartStart module with GPS, you can start your vehicle with a smartphone or tablet. Both SmartStart models are compatible with Apple iOS devices (with iOS 4.3 or later) and Android (with SDK 1.6 or newer). Blackberry devices (with OS 4.6 to 6) are compatible with SmartStart, but not SmartStart with GPS.
Loading...
Loading accessories...
Customer Q&A
4 questions already asked
Loading...
Loading articles...