About the XpressKit CHALL
XpressKit modules work with your vehicle's anti-theft system to incorporate the convenience, security and luxury features of your Python alarm system.
An XpressKit interfaces with vehicles using an "immobilizer" key system, allowing you to route commands through your vehicle's data system, so your signal's more secure. You have fewer wires to connect and, best of all, your extra key stays with you, not in your car.
The CHALL allows you to use a Python alarm system for remote start, as well as control over the door lock and factory alarm settings, in select 2004-up Chrysler vehicles equipped with the new generation of "Tip Start" anti-theft systems, including the Charger, Challenger and Ram.
Important: If you know how to use a multimeter and have experience working with your vehicle's electrical system, you should be able to install this car security equipment. If you're unfamiliar with installing car security equipment, please speak to an Advisor before attempting this installation. Note: Before purchasing, please call us at 1-888-955-6000 to confirm that this product works with your vehicle.
Product highlights:
- remote start data interface and door lock & alarm control for Python alarm systems
- preloaded for use in late model Chrysler, Dodge and Jeep vehicles equipped with "Tip Start" anti-theft systems
- no key required works with your factory databus
- included 10-pin harness provides wires to connect to your factory system
- maintains factory alarm interface integrity
- door lock, sliding door, and door pin status control
- window roll-up
- trunk/hatch release
- warranty: 1 year
- MFR # CHALL
What's in the box:
XpressKit CHALL owner's manual
- Chrysler/Dodge/Jeep door-lock and override interface
- Wiring harness
- T-harness
- D2D cable
- Installation Guide
- Programming Addendum
Customer reviews for XpressKit CHALL
Loading...
Loading reviews...
Thanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the XpressKit CHALL
Product Research
Features
Overview: The Xpresskit CHALL is a door-lock and override interface for select 2004-2013 Chrysler, Dodge, and Jeep vehicles when adding an aftermarket remote car starter or alarm. The Xpresskit CHALL comes standard with the "TIP-START" style T-harness.
- T-Harness: CHALL is a data bus module that controls the door locks, factory security, transponder key-override (In-data) and sliding doors/power hatch. What makes this unit special is that it comes with a T-harness for fast and highly reliable installation.
- D2D Compatible: The module is full 2-way D2D compatible with most remote starters and only requires a single key to program it (no key required to operate).
- "Tip-Start": The CHALL will also cover the new generation of "Tip start" models such as the Charger, Challenger, and Ram.
- Upgradeable: Fully flashable and upgradeable, but comes with all software pre-loaded for quick-and-easy "out-of-the-box" installs.
Note: Click here for compatibility chart. An optional "MUX" style T-harness may be required (sold separately). As always, please consult the Crutchfield Car Selector for specific compatibility with your make, model, and year vehicle.
Loading...
Loading accessories...
Customer Q&A
Loading...
Loading articles...