Many cars today feature an immobilizer security system that won't allow the car to start without first sensing the presence of a chip imbedded in the key or key fob. The XpressKit DB-ALL module tells your vehicle through its databus that it's okay for an aftermarket remote start or security system to start the engine or unlock the doors without that chip.
The XpressKit DB-ALL module works with all Viper, Directed, and Python security systems, as well as most other brands.
Simplifies your security wiring
A single data-to-data harness connects your Viper (or other Directed) system to the DB-ALL, so you don't have to hard wire your security system to a lot of door locks, solenoid releases, and other sensors — you'll save a huge amount of installation time. The DB-ALL module usually connects to your vehicle via 2 to 6 hardwired data connections, but we do carry some vehicle-specific T-Harnesses that make that connection much easier (call for details). Your DB-ALL module will come pre-programmed for your specific vehicle, so you'll have total control over locking and unlocking doors, starting the engine, arming and disarming the factory alarm, and any other computerized function your vehicle can perform.
Even simpler installation for remote start-ready vehicles
Many vehicles are remote-start-ready. If you own one of these, you probably won't even need a separate remote start system — just use an XpressKit DB-ALL and a T-Harness (if available). To activate the remote start, you'll need to press "Lock" three times on your factory remote. For extended range, add a Viper SmartStart module to control your vehicle remotely by smartphone. If you're not sure if your vehicle qualifies, check the XpressKit site, or give one of our Advisors a call at 1-888-955-6000.
Important: If you know how to use a multimeter and have experience working with your vehicle's electrical system, you should be able to install this car security equipment. If you're unfamiliar with installing car security equipment, please speak to one of our Advisors before attempting this installation. Professional installation is highly recommended.
Note: You must identify your vehicle in Crutchfield's Car Selector to order a Viper DB-ALL module online. Or, if you prefer, call an Advisor at 1-888-955-6000 to make sure you get the bypass module programmed for your exact vehicle.