About the XpressKit DLPKKICH3 Interface Module
XpressKit modules work with your vehicle's anti-theft system to incorporate the convenience, security, and luxury features of your Python alarm system.
An XpressKit interfaces with vehicles using an "immobilizer" key system, allowing you to route commands through your vehicle's data system, so your signal's more secure. You have fewer wires to connect and, best of all, your extra key stays with you, not in your car.
Use the DLPKKICH3 interface module to control the door lock and factory alarm settings on select 2004-up Chrysler, Dodge, and Jeep vehicles equipped with factory anti-theft systems.
Important: If you know how to use a multimeter and have experience working with your vehicle's electrical system, you should be able to install this car security equipment. If you're unfamiliar with installing car security equipment, please speak to an Advisor before attempting this installation. Note: Before purchasing, please call us at 1-888-955-6000 to confirm that this product works with your vehicle.
Product highlights:
- door lock & alarm control data interface for Python alarm systems
- preloaded for use in select 2004-up Chrysler, Dodge, Jeep, and VW vehicles equipped with factory anti-theft systems
- no key required works with your factory databus
- included harnesses provides wires to connect to your factory system
- factory alarm interface controls
- support the full array of comfort and convenience features found in 2004-up 3rd generation Chrysler, Dodge, Jeep, and VW vehicles
- 3-5/16"W x 13/16"H x 2-3/8"D
- warranty: 1 year
- MFR # DLPKKICH3
What's in the box:
XpressKit DLPKKICH3 Interface Module owner's manual
- Data bus door lock/ignition control module
- Wafer key
- 10-pin 18' harness
- 4-pin 26" harness
- 4-pin 20" harness
- RF antenna loop
- Mounting screw
- Installation Guide
Customer reviews for XpressKit DLPKKICH3 Interface Module
Loading...
Loading reviews...
Thanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the XpressKit DLPKKICH3 Interface Module
Product Research
Features
Overview: The Xpresskit DLPKKICH3 is a Chrysler 3rd Generation High Speed CAN Bus door lock and alarm control with integrated RF transponder bypass and electronic ignition switch interface module. The DLPKKICH3 is designed to support the full array of comfort and convenience features found in 2008-09 3rd generation Chrysler, Dodge and Jeep vehicles.
Compatibility: The DLPKKICH3 is a combo data bus door lock control module with integrated 3rd generation Chrysler Sentry key RF transponder bypass and a solder free ignition switch wafer interface. This High Speed CAN bus module interfaces with the 2008/2009 Chrysler, Dodge and Jeep vehicles that are equipped with the new style key and electronic ignition barrel.
Note: Some 2009 models may have the "new" ignition mode and may not be compatible with this product; a solution will be available shortly for these vehicles.
Installation: The DLPKKICH3 design utilizes a patent pending concept that simplifies installation and does not require the installer to solder wires inside the ignition barrel. Installation only takes approximately 30 minutes, maintains the integrity of the factory system, and does not void the vehicle's warranty.
Loading...
Loading accessories...
Customer Q&A
Loading...
Loading articles...