1.888.955.6000
 
 
1-888-955-6000
crutchfield.com
Crutchfield

Kenwood KAC-8105D

Mono subwoofer amplifier — 500 watts RMS x 1 at 2 ohms (Factory Refurbished)

Zoom
  • Kenwood KAC-8105D

    Front

  • Kenwood KAC-8105D

Crutchfield OMC logo
We don't check this item for fit or compatibility.
Item #: 613KAC8105
 

Review Summary

DISCONTINUED
 
This item is no longer available to purchase.
 
Contact us for other options
 
Call   Email  
 
 
 
 
 

Our take on the Kenwood KAC-8105D

by Buck Pomerantz

My system has plenty of power. Who needs an amp?

You might think you don't need an amp because you have a 400-watt system in your car, or because your new stereo puts out 50 watts a channel. But those are peak wattage ratings, which may boil down to 15 or 20 watts per channel, using the more realistic RMS rating. An amp sends your speakers the power they need to deliver your music with clarity and impact, whether you're using factory speakers or high-performance components. And low-frequency reproduction requires lots of power, so an amp is an absolute must if you're adding a sub to your system.

Kenwood Performance Series car amplifiers offer long-term reliability and superior sound quality in a compact, no-nonsense package. The KAC-8105D mono sub amp punches out up to 500 watts RMS to your subwoofers. A rugged cast-aluminum heatsink keeps this amp running at optimal temperatures, even when you're pushing your system hard.

A built-in low-pass filter lets you adjust the output so you'll get the best sound possible from your subwoofer/box combo. You can dial in up to 18 dB of bass boost if you want to fatten up the sound. A switchable subsonic filter eliminates inaudible, ultra-low noise that could detract from your sub's performance.

An aluminum cover plate covers and protects the amp's controls and connections, giving your installation a professional look. Speaker-level inputs and signal sensing turn-on allow these amps to hook up to factory radios without preamp outputs.

See more info on this item

Highlights:

  • mono subwoofer amplifier
  • 300 watts RMS x 1 at 4 ohms (500 watts x 1 at 2 ohms)
  • CEA-2006 compliant
  • variable low-pass filter (50-200 Hz at 24 dB per octave)
  • bass boost (0-18 dB at 40 Hz )
  • subsonic filter (15/25 Hz, 18 dB/octave )
  • Class D design
  • speaker-level inputs with signal sensing turn-on
  • preamp inputs and outputs
  • fuse rating: 30A x 2
  • 8-gauge power and ground leads recommended — wiring and hardware not included with amplifier
  • 11"W x 2-3/8"H x 9-1/2"D
  • warranty: 90 days
  • Our 60-day money-back guarantee

Hands-on research from the Crutchfield Labs (what are the Labs?)

Features and Specs
Performance
RMS Power Output (Watts x Channels)
Loading...
300 x 1
Peak Power Output (Watts x Channels)
Loading...
1000 x 1
Power at 2 Ohms (Watts x Channels)
Loading...
500 x 1
Bridged Power (Watts x Channels)
Loading...
N/A
Minimum Impedance Bridged
Loading...
N/A
Minimum Impedance Unbridged
Loading...
2
Best Frequency Response
Loading...
10-200 Hz
THD at Rated RMS Power
Loading...
1%
Signal to Noise Ratio
Loading...
100 dB
Input Voltage
Loading...
14.4v
Features
Amplifier Class
Loading...
D
Low-Pass Crossover Frequency
Loading...
50-200 Hz
Low-Pass Slope (dB/octave)
Loading...
24 dB/oct
High-Pass Crossover Frequency
Loading...
N/A
High-Pass Slope (dB/octave)
Loading...
N/C
Bass Boost
Loading...
0-18 dB
Bass Boost Frequency
Loading...
40 Hz
Fan Cooled
Loading...
No
Fuse Rating
Loading...
60
Speaker Level Inputs
Loading...
Harness
Preamp Outputs
Loading...
1 pair
Width (inches)
Loading...
11
Height (inches)
Loading...
2-3/8
Depth (inches)
Loading...
9-1/2
Parts Warranty
Loading...
90 Days
Labor Warranty
Loading...
90 Days
Product Research
What's in the box?

Download owner's manual

  • Refurbished mono amplifier (with two 30-amp ATO fuses inserted into the chassis)
  • Speaker-level input harness
  • 4 Self-tapping screws
  • Hex-key
  • Instruction Manual (Eng/Fre/Spa)
  • Warranty Card

Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team — they open the box, verify contents, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.

Features
Controls
Connections

Features

Class D Amplifier Design: The KAC-8105D is a Class D mono-block amplifier, which uses digital switching to amplify audio signals. This design results in high efficiency and less heat.

MOSFET Switching Power Supply: The amplifier utilizes a MOSFET switching power supply providing thermal stability and efficient switching speeds guaranteeing performance and dependability.

Mono-Power Amp Design: The Kenwood KAC-8105D is designed with specific features to power your subwoofers with a frequency range between 10-200 Hz. The amplifier can handle impedance loads down to 2-ohm.

CEA 2006 Compliant: The KAC-8105D's power ratings are measured according to the strict standards dictated by the Consumer Electronics Association (CEA). These standards allow you to accurately compare the rated power output of all CEA 2006-compliant amplifiers, even if they come from different brands. Manufacturers who adhere to the standards can display the CEA 2006 logo on their products and packaging. CEA 2006 Compliant Ratings:

  • Mono-Channel (4-ohm): 300 watts x 1 channel RMS (20-200 Hz, 1% THD)
  • Mono-Channel (2-ohm): 500 watts x 1 channel RMS (100 Hz, 1% THD)

Note: This amplifier is not designed to power a full-range speaker.

Cast Aluminum Heat Sink: The Kenwood KAC-8105D utilizes a cast aluminum heat sink design to ensure that the amplifier stays at its optimal temperature.

Ventilation: There are two vents located on the back side of the amplifier to help dissipate heat and ensure cool, reliable operation. Make sure not to block these vents when you install the amplifier.

Protection circuitry: The amplifier features protection circuits that will turn the amp off in case of the following events:

  • Speaker output contacts ground
  • Speaker wire short-circuits
  • Unit malfunctions and DC is sent to speaker output

Aluminum Cover Plate: The amplifier's controls and connections are hidden under a removable extruded aluminum cover plate. The cover plate provides a professional looking installing while helping to protect the amplifier's connections and control settings. The cover is held in place by two hex head screws. An allen-wrench is supplied to remove the cover.

Blue/Red Illumination: The Kenwood Mono-Channel amplifier features a blue and red LED illumination when the amplifier is turned on. When the power is turned on to the amplifier, the Power indicator will light up red. This indicator will turn off with the amplifier and will turn off if the amplifier goes into protect mode. The amplifier also features a Blue LED lamp on the top of the amplifier which illuminates when the amplifier is on.

Signal-sensing Turn-On Circuitry: When the speaker-level input is used, it is not necessary to connect the power control wire (turn-on lead). The amplifier senses the signal from the speaker-level input and turns the amplifier power on automatically. Shortly after no signal is detected, the amplifier will automatically shut itself off.

Controls

Gain:To accommodate the varying range of signal levels coming from today's factory and aftermarket radios, the Kenwood KAC-8105D features an adjustable, independent gain control (0.2-5.0V). This means that no matter what kind of radio is connected to this amplifier, the appropriate gain control adjustment can be made to ensure loud, clear, distortion-free music.

Low-Pass Filter: The KAC-8105D has a built-in 24dB/octave low-pass filter that is continuously variable from 50Hz to 200Hz.

Bass Boost: The bass boost is adjustable from 0-18dB at 40Hz.

Infrasonic Filter: This amp features an 18dB/octave Infrasonic Filter. Ultra-low frequencies that cannot be reproduced by a subwoofer do not become sound but become unnecessary oscillations, which affect sound by causing distortion. These frequencies also waste amplifier power and can cause damage to speakers. Setting the Infrasonic filter switch to 15Hz or 25Hz cuts the frequencies below the respective frequency to improve the reproduction performance of the speakers by eliminating harmful distortion.

Connections

Power Connections: The power and ground connections are 0.5625" wide screw terminals that will accommodate up to 4-gauge wire. The remote turn-on terminal is 0.3125" wide and will accept up to 8-gauge wire. A Phillips-head or flat blade screw driver (not supplied) is required to tighten/loosen the terminals. Spade connectors are recommended for the power, ground, and remote wires.

Speaker Outputs: The Kenwood KAC-8105D is equipped with a single pair of speaker terminals. Both speaker terminals are 0.3125" wide screw terminals and will accommodate up to 8-gauge wire. A Phillips-head or flat blade screw driver (not supplied) is required to tighten/loosen the terminals. Spade connectors are recommended for the speaker wires.

Line Level Input: The mono-channel amplifier is equipped with a single pair of gold-plated RCA line level inputs.

Speaker Level Input: The KAC-8105D comes with a two channel speaker level input harness. Once you splice the speaker wires from the receiver to the harness, you have plug-in convenience to the amplifier. This feature makes it easier to add an amplifier to a factory radio or to a receiver with no preamp outputs. The maximum power output from the source receiver can be no more than 40 watts.

Line Level Output: The amplifier has a pair of gold-plated RCA line level outputs for feeding a full-range stereo signal to another amplifier. It is the same signal that is input through the line inputs. The amplifier's crossovers have no effect on the line level output signal.

Fuses: The KAC-8105D is equipped with two 30 amp ATO blade fuses.

 
Review this product
Great Gear Giveaway rewards card

Submit a review and then enter to win a $500 rewards card

Kenwood KAC-8105D Reviews

Average Customer Review:

21 people say:

Review this product:

Thanks for taking the time to share your experiences about this product. Please be sure to focus your comments on the product itself. Read our Review Guidelines for more information.

Your email won't be visible. Please use the email address that is associated with your order.
(e.g., JohnD) Your review will be signed using the display name and location
(e.g., Charlottesville, VA)

Click on a star to rate the overall product on a scale of 1-5
1500 characters left
Attach a YouTube Review
Crutchfield Video Review Guidelines
  • Only submit videos that you made or are authorized to use.
  • Do not submit videos that contain music, video or visuals that are copyrighted and belong to someone else.
  • Please see our Review Guidelines for more information.
500 characters left
500 characters left
Filter by rating:
5 out of 5

Great item

Written By Thad, Denver, CO on Friday, July 12, 2013
Crutchfield Customer Review (What's this?)
 
This amp has is a great value for powering a sub. It has great power for the price. Another feature that I am really happy about is the crossover below 200 hz. When I hooked this up to my sub outputs on my deck, I was really disappointed with how muddy things sounded. My sub output is 120 hz and lower. I switched the connection to one of the full range outputs from my deck, and let the amp crossover do its thing, and I get much better sound and punch than the 120 hz output. I am also only powering one 10" 4ohm sub, so I'm not even using this amp to capacity. Very happy with the purchase.
Pros:
Value, power, easy hookup, rca outputs for adding full range speakers.
Cons:
Can't think of any
Was this review helpful?    Yes | No
 
5 out of 5

KAC-8105D Refurbished

Written By JayGrif, Clementon, New Jersey on Tuesday, December 04, 2012
 
I bought this amp refurbished from CRUTCHFIELD to power an MTX JH 4510-XD enclosed sub woofer system.The controls are simple & straight forward, the amp has preouts for simplified future expansion, & the amp runs cool. The power consumption seems a little high as my lights are dimming noticeably on significant bass drops.(A Big 3 Wiring Upgrade should take care of that.) Overall the value of this amp can't be beat. It supplies good clean power, doesn't take up a lot of space,(foot print is about the size of a sheet loose leaf paper) and it looks good. My subs sound great with the gain set at about 60%. It's a great product for a moderately powered sub woofer set up.
Pros:
Great price. Simple controls & connections. Small footprint. Looks good. CRUTCHFIELD technical support & customer service.
Cons:
Seems a little power hungry.
2 out of 2 people found this helpful
Was this review helpful?    Yes | No
"Coolness Factor"
Build Quality
Ease of Use
Sound Quality
Value
 
5 out of 5

reliable & clean power!

Written By miguelito, Hawaii on Thursday, July 12, 2012
 
This is my 2nd KAC-8105D, my first one is about a year old and still going strong! So it wasn't hard to choose this one for our 2nd car. The setup is nothing too fancy just clean cut controls and bottom line reliability. Both amps were purchased factory refurbished and such a huge amount of cash was saved going this route. The footprint of this amp is minimal so you still have choice for optimal placement in the car. I have yet to come across any complaints or shortcomings with this solid amp. I highly recommend this amp for anybody that needs solid performance at a thrifty price!
Pros:
inexpensive power and solid reliability
Cons:
none to report
7 out of 7 people found this helpful
Was this review helpful?    Yes | No
 
5 out of 5

KAC-8105D Refurb

Written By Glenn, Tanner, AL on Saturday, June 09, 2012
Crutchfield Customer Review (What's this?)
 
The amp worked perfectly with straight forward connections and controls. My configuration uses the remote power on and a subwoofer signal from my Clarion radio. With my mounting the controls are easy to access for tweaking the levels. It is going to be hard to beat this amp at this price. Even with the 2 year extended warranty that I bought it was just over $100.
Pros:
My track record with this series of subwoofer amplifier is it is solid and reliable.
Cons:
None to note
3 out of 3 people found this helpful
Was this review helpful?    Yes | No
 
5 out of 5

.....ROCKIN' BASS!

Written By Mabel, Old Bridge, NJ on Saturday, June 09, 2012
 
My factory system has very good highs and mids, all that was missing was some serious bass. l bought this amp and hooked it up to a Sound Ordinance subwoofer. This amp has tons of power ..putting out loud clean bass. This amp rocks!
Pros:
Very cool looking design and tons of power!
Cons:
Absolutely none!!
3 out of 3 people found this helpful
Was this review helpful?    Yes | No
"Coolness Factor"
Build Quality
Ease of Use
Sound Quality
Value
 
5 out of 5

What a Bargain!

Written By KennyE, Stapleton, NE on Tuesday, June 05, 2012
 
Bought this amp for my daughter's Blazer, to run a single Polk Audio 1240D. It's rated for 500w/rms into 2 ohms, perfect match for the dual 4ohm voice coils on the Polk sub. Used 8 ga. power and ground wire, and RCA cables to her Kenwood head unit. Bought this as a factory re-furb for a GREAT PRICE! It did have a couple light scratches on the face, but they were weren't objectionable based on price. Great amp for the money!!!!!
Pros:
Small footprint, runs cool, lots of power! Awesome bargain! Looks nice.
Cons:
NONE!
3 out of 3 people found this helpful
Was this review helpful?    Yes | No
 
1 out of 5

Horrible amp

Written By Ef0401, Menifee ca on Wednesday, May 23, 2012
Crutchfield Customer Review (What's this?)
 
Horrible amp dont waste your money!
Pros:
Sounds ok when it stays on
Cons:
Only lasts about a minute before shuts off. Then you have to Turn radio on and off to restart it
Was this review helpful?    Yes | No
 
4 out of 5

Kenwood Amp

Written By BlackIrish, Denver, CO on Friday, May 18, 2012
Crutchfield Customer Review (What's this?)
 
Bought this amp as part of a package and its worth the money. Im powering two 12" Kenwood subs in a sealed enclosure and the whole thing hits so hard it makes my deck skip when I try and play a cd. Looks like its Ipod from here on out.
Pros:
Amp is easy to hook up straight forward and since its a Class D runs very cool.
Cons:
The cover plate for the connections does not allow for disconnects unless you remove plate again. Not a big deal since it cleans up that area nicely,
2 out of 3 people found this helpful
Was this review helpful?    Yes | No
 
5 out of 5

Great amp for being refurbished

Written By Nathan, Leesport, PA on Wednesday, May 09, 2012
 
Amp looks amazing, easy to setup, nice looking on the outside, powerful for kicking two rockfords i hooked to it
Pros:
Loud sound with minimal heat dissipation mounted vertical on back of box, sleek looking aluminum plate to cover wire terminals, switches and the adjustment knobs and make the amp look amazing
Cons:
Don't put the cover on the amp until you are sure you are done, it's a bit of fun to try and adjust the voltage for the preamp signal when theres not much light cause of cover
1 out of 1 people found this helpful
Was this review helpful?    Yes | No
"Coolness Factor"
Build Quality
Ease of Use
Sound Quality
Value
 
5 out of 5

awesome product

Written By jith, kuwait on Saturday, April 21, 2012
 
great amp for my polk audio db1212 2ohm.giving strong deep bass that shakes my montero.
Was this review helpful?    Yes | No
 
5 out of 5

Great Amp

Written By Jason, Tampa, FL on Sunday, March 11, 2012
 
I have had this amp for 2 years now and it is amazing. I have 2 12 inch Kenwood subs wired at 4 ohms and they hit extremely hard. I have never had any problems with this amp at all. It is a lot louder than it should be for the price and from experience, it is deffinately reliable.
Cons:
None
1 out of 1 people found this helpful
Was this review helpful?    Yes | No
 
5 out of 5

Clean Tight Bass

Written By islandreamer, Virginia Beach, VA. on Monday, November 14, 2011
 
Paired this with a Rockford Fosgate R1S410 sub on a custom built sealed box. Sounds solid and stays cool. This has so much extra power that I might add another sub so I can extract the 500 watts at 2 ohms.
Pros:
Mono setup. 300 watts at 4 ohms. Infrasonic filter. Vent holes. Blue and Red lighting.
Cons:
None so far.
2 out of 2 people found this helpful
Was this review helpful?    Yes | No
"Coolness Factor"
Build Quality
Ease of Use
Sound Quality
Value
 
4 out of 5

Kenwood KAC-8105D

Written By RockinTacoma, North Augusta , South Carolina on Thursday, June 02, 2011
Crutchfield Customer Review (What's this?)
 
This is a very nice amp for not alot of money. Very good bang for your buck. The only thing I would like to see different is the controls to be relocated to the top side of the amp. I have this amp mounted upside down in my 2006 Tacoma and have had no problems so far. I did this so I could get to the controls easier.
1 out of 2 people found this helpful
Was this review helpful?    Yes | No
 
5 out of 5

Kenwood Amp

Written By T-F-L-O, Indiana on Wednesday, May 25, 2011
Crutchfield Customer Review (What's this?)
 
I bought this a few weeks ago and it works great! It's listed at a very good price and you will not be disappointed with your purchase! Definitely recommend if you are looking for something affordable to buy.
1 out of 1 people found this helpful
Was this review helpful?    Yes | No
 
5 out of 5

2007 Lincoln Mark LT

Written By Marcus M., Douglasville, GA on Tuesday, May 24, 2011
 
I recently upgraded my factory system. I have a complete Kenwood system. This amp was the finishing touch to my project. Powerful amp! I still have it set at zero!! AWESOME!!
1 out of 1 people found this helpful
Was this review helpful?    Yes | No
 
5 out of 5

Great Amp

Written By John G, Madison, Wi on Wednesday, April 06, 2011
Crutchfield Customer Review (What's this?)
 
Bought this amp to go with my Rockford P3 and it has done a great job.
Handles it flawlessly and the lights look cool too.
2 out of 2 people found this helpful
Was this review helpful?    Yes | No
 
5 out of 5

GREAT AMP

Written By abe, arlington tx on Tuesday, March 01, 2011
 
Just got this amp hooked up to two infinity 10s and it rocks sounds great in
my 2010f150 plus the mb quarts help out too! but the price and someone who
knows ho to hook it up right this amp ROCKS!
2 out of 2 people found this helpful
Was this review helpful?    Yes | No
 
4 out of 5

Strong amp for the money

Written By Bobby, Pearland, TX on Wednesday, January 12, 2011
Crutchfield Customer Review (What's this?)
 
This amp is pushing a 12" Bazooka tube in my corvette. Plenty of power for 12" Bazooka's.
I have the gain turned about 1/4 of the way and still get good bass.
2 out of 3 people found this helpful
Was this review helpful?    Yes | No
 
5 out of 5

Simple, works as advertised.

Written By alex, Bozeman, MT on Monday, November 15, 2010
Crutchfield Customer Review (What's this?)
 
This is a relatively simple sub-woofer amp. It works exactly as advertised. I'm
using this to power a 12" JVC in a sealed box, and it sounds great. Amp runs
relatively cool pushing fairly loud @ 300w RMS/4Ohms. The unit looks much
sharper in person than it does in the photos.
2 out of 2 people found this helpful
Was this review helpful?    Yes | No
 
5 out of 5

sweet amp

Written By fortybelow7, Kansas City on Thursday, July 15, 2010
Crutchfield Customer Review (What's this?)
 
Sweet amp, got it hooked up to two 10" kenwoods. Barely got the bass turned up and it pumps out some power. I'd recommend it if you are looking for a decent amp but don't want to spend a ton of money.
3 out of 3 people found this helpful
Was this review helpful?    Yes | No
 
5 out of 5

Love it!!

Written By gtjinter, Downingtown ,PA on Sunday, July 11, 2010
 
I just bought this amp and I love it, just enough power to push my one 10" alpine type R. I normally listen to my music at a moderate level and it bumps!! I can hear my plate rattling from the outside of my car , Might need to buy some dynamat for that. Get the warranty because eventually you will start turning up the stereo louder and louder and it might get fried since it's not fan cooled!! For right now it's great even at low volume I cant see in my rear view or side mirrors because it shakes from the bass ..Highly recommended...
6 out of 6 people found this helpful
Was this review helpful?    Yes | No
 

Add accessories for the Kenwood KAC-8105D

You'll need an amp wiring kit to install your new amplifier, as wiring is not included. See all categories & accessories

T-Spec 8PK Installation Kit 8-gauge amplifier wiring kit — includes speaker wire
5 people say
Your Price: $59.99
Add to Cart
EFX 8-gauge Amplifier Wiring Kit Power and signal connections for your new amp
160 people say
Your Price: $49.99
Add to Cart
Rockford Fosgate RFK8 8-gauge amplifier power wiring kit
4 people say
Your Price: $64.99
Add to Cart
Rockford Fosgate RFK8i 8-gauge amplifier power and signal wiring kit
28 people say
Your Price: $74.99
Add to Cart
Kicker PK8 8-gauge amplifier power wiring kit
1 person says
Your Price: $79.99
Add to Cart
T-Spec 16-gauge Speaker Wire Black/white jacket — priced per foot
11 people say
Your Price: $0.69
Add to Cart
T-Spec 12-gauge Speaker Wire Black/white jacket — priced per foot
23 people say
Your Price: $1.99
Add to Cart
Stinger PRO Series 16-gauge Speaker Wire Black jacket — priced per foot
44 people say
Your Price: $0.39
Add to Cart
T-Spec 2-Channel RCA Patch Cables Available in 7 different lengths (17-foot)
20 people say
Your Price: $19.99
Add to Cart
50 people say
Your Price: $9.99
Add to Cart
EFX CFHG4 Fuse Holder In-line AGU fuse holder accepts 4- to 8-gauge wire
Your Price: $9.99
Add to Cart
Rockford Fosgate RFFAGU Fuse Holder Platinum-plated AGU fuse holder
Fits 4- or 8-gauge cable
23 people say
Your Price: $10.99
Add to Cart
T-Spec Capacitor 1.5-farad capacitor with red LCD meter
8 people say
Your Price: $79.99
Add to Cart
Metra Crimp Tool and Connectors Package contains crimp tool and over 150 pieces
15 people say
Your Price: $19.99
Add to Cart
S&G Wire Cutter/Stripper Tool Cuts and strips 12- to 22-gauge wire
13 people say
Your Price: $19.99
Add to Cart
S&G Tool Aid 87650 Door Trim and Panel Removal Tool
65 people say
Your Price: $9.99
Add to Cart
Pro.Fit Wire Worm Installation tool helps route wiring through tight spaces
27 people say
Your Price: $12.99
Add to Cart
Bojo Trim Panel Tools Set of 6 pry tools — helps remove interior and exterior trim and door panels
46 people say
Your Price: $24.99
Add to Cart
Skewdriver Pro SPK4042 Ratcheting straight and offset screwdriver set with 40 bits (Skewdriver Pro with ratchet handle, pictured)
7 people say
Your Price: $49.99
Add to Cart
Bojo Trim Panel Tools Set of 6 pry tools — helps remove interior and exterior trim and door panels
2 people say
Your Price: $29.99
Add to Cart
InstallCard: Amp or Equalizer Prepaid professional amplifier or EQ installation
17 people say
Your Price: $79.99
Add to Cart

Why choose SquareTrade?

The #1-Rated Protection Plan

Thousands of people have reviewed SquareTrade Protection Plans — and made us #1.

5-Day Service Guarantee & Free Shipping

We'll repair or replace your item in five business days or less after we've received it, or your plan is free. And, as always, we pay for all shipping.

Protection from Normal, Everyday Use

Repairing your average mechanical or electrical failure can cost as much as buying a new device. With SquareTrade, you're covered — including parts and labor.

1 Year Protection Plan
1 Year Protection Plan
Your Price: $13.99
Add to Cart
2 Year Protection Plan
2 Year Protection Plan
Your Price: $20.99
Add to Cart

For a more in-depth review and enhanced detailed information on the Kenwood KAC-8105D, please visit the Crutchfield website product page (/ISEO-rccbcspd/p_613KAC8105/Kenwood-KAC-8105D.html ).