Kenwood Performance Series car amplifiers offer long-term reliability and superior sound quality in a compact, no-nonsense package. The KAC-9105D mono sub punches out up to 900 watts RMS to your subwoofers. A rugged cast-aluminum heatsink combines with two cooling fans to keep this amp running at optimal temperatures, even when you're pushing your system hard. And this bass workhorse will handle a 1-ohm load without breaking a sweat, so go ahead and hook up multiple subs.

A built-in low-pass filter lets you adjust the output so you'll get the best sound possible from your subwoofer/box combo. You can dial in up to 18 dB of bass boost if you want to fatten up the sound. A switchable subsonic filter eliminates inaudible, ultra-low noise that could detract from your sub's performance.

An aluminum cover plate covers and protects the amp's controls and connections, giving your installation a professional look. Speaker-level inputs and signal sensing turn-on allow these amps to hook up to factory radios without preamp outputs.

Product Highlights:

  • mono subwoofer amplifier
  • 500 watts RMS x 1 at 4 ohms (900 watts x 1 at 2 ohms)
  • 1-ohm stable (output regulated to 900 watts)
  • CEA-2006 compliant
  • variable low-pass filter (50-200 Hz at 24 dB per octave)
  • bass boost (0-18 dB at 40 Hz )
  • subsonic filter (15/25 Hz, 18 dB/octave )
  • phase switch
  • Class D design
  • speaker-level inputs with signal sensing turn-on
  • preamp inputs and outputs
  • dual cooling fans
  • fuse rating: 30A x 3
  • 4-gauge power and ground leads recommended — wiring and hardware not included with amplifier
  • 13-3/4"W x 2-3/8"H x 9-3/4"D
  • warranty: 90 days
  • Our 60-day money-back guarantee

My system has plenty of power. Who needs an amp?

You might think you don't need an amp because you have a 400-watt system in your car, or because your new stereo puts out 50 watts a channel. But those are peak wattage ratings, which may boil down to 15 or 20 watts per channel, using the more realistic RMS rating. An amp sends your speakers the power they need to deliver your music with clarity and impact, whether you're using factory speakers or high-performance components. And low-frequency reproduction requires lots of power, so an amp is an absolute must if you're adding a sub to your system.

Hands-on research

What's in the box?

Download owner's manual

  • Refurbished mono amplifier (with three 30-amp ATO fuses inserted into the chassis)
  • Speaker-level input harness
  • 4 Self-tapping screws
  • Hex-key
  • Instruction Manual (Eng/Fre/Spa)
  • Warranty Card

Product Research

Features
Controls
Connections
Warranty Note

Features

Class D Amplifier Design: The KAC-9105D is a Class D mono-block amplifier, which uses digital switching to amplify audio signals. This design results in high efficiency and less heat.

MOSFET Switching Power Supply: The amplifier utilizes a MOSFET switching power supply providing thermal stability and efficient switching speeds guaranteeing performance and dependability.

Mono-Power Amp Design: The Kenwood KAC-9105D is designed with specific features to power your subwoofers with a frequency range between 10-200 Hz. The amplifier can handle impedance loads down to 1-ohm.

CEA 2006 Compliant: The KAC-9105D's power ratings are measured according to the strict standards dictated by the Consumer Electronics Association (CEA). These standards allow you to accurately compare the rated power output of all CEA 2006-compliant amplifiers, even if they come from different brands. Manufacturers who adhere to the standards can display the CEA 2006 logo on their products and packaging. Amplifier Power Ratings:

  • Mono-Channel (4-ohm): 500 watts x 1 channel RMS (20-200 Hz, 1% THD)
  • Mono-Channel (2-ohm): 900 watts x 1 channel RMS (100 Hz, 1% THD)
  • Mono-Channel (1-ohm): over 900 watts x 1 channel
  • Peak Power: 1800 watts x 1 channel

Note: This amplifier is not designed to power a full-range speaker.

Cast Aluminum Heat Sink: The Kenwood KAC-9105D utilizes a cast aluminum heat sink design to ensure that the amplifier stays at its optimal temperature.

Fan Cooled: There are two fans and two vents located on the back side of the amplifier to help dissipate heat and ensure cool, reliable operation. Make sure not to block these vents or fans when you install the amplifier.

Protection circuitry: The amplifier features protection circuits that will turn the amp off in case of the following events:

  • Speaker output contacts ground
  • Speaker wire short-circuits
  • Unit malfunctions and DC is sent to speaker output

Aluminum Cover Plate: The amplifier's controls and connections are hidden under a removable extruded aluminum cover plate. The cover plate provides a professional looking installing while helping to protect the amplifier's connections and control settings. The cover is held in place by two hex head screws. An allen-wrench is supplied to remove the cover.

Blue/Red Illumination: The Kenwood Mono-Channel amplifier features a blue and red LED illumination when the amplifier is turned on. When the power is turned on to the amplifier, the Power indicator will light up red. This indicator will turn off with the amplifier and will turn off if the amplifier goes into protect mode. The amplifier also features a Blue LED lamp on the top of the amplifier which illuminates when the amplifier is on.

Signal-sensing Turn-On Circuitry: When the speaker-level input is used, it is not necessary to connect the power control wire (turn-on lead). The amplifier senses the signal from the speaker-level input and turns the amplifier power on automatically. Shortly after no signal is detected, the amplifier will automatically shut itself off.

Controls

Gain: To accommodate the varying range of signal levels coming from today's factory and aftermarket radios, the Kenwood KAC-9105D features an adjustable, independent gain control (0.2-5.0V). This means that no matter what kind of radio is connected to this amplifier, the appropriate gain control adjustment can be made to ensure loud, clear, distortion-free music.

Low-Pass Filter: The KAC-9105D has a built-in 24dB/octave low-pass filter that is continuously variable from 50Hz to 200Hz.

Bass Boost: The bass boost is adjustable from 0-18dB at 40Hz.

Phase Switch: This amplifier is equipped with a 2-way phase switch. You can choose 0° (normal phase) or 180° (reverse phase), whichever position results in stronger performance for the subwoofer.

Infrasonic Filter: This amp features an 18dB/octave Infrasonic Filter. Ultra-low frequencies that cannot be reproduced by a subwoofer do not become sound but become unnecessary oscillations, which affect sound by causing distortion. These frequencies also waste amplifier power and can cause damage to speakers. Setting the Infrasonic filter switch to 15Hz or 25Hz cuts the frequencies below the respective frequency to improve the reproduction performance of the speakers by eliminating harmful distortion.

Connections

Power Connections: The power and ground connections are 0.5625" wide screw terminals that will accommodate up to 4-gauge wire. The remote turn-on terminal is 0.3125" wide and will accept up to 8-gauge wire. A Phillips-head or flat blade screw driver (not supplied) is required to tighten/loosen the terminals. Spade connectors are recommended for the power, ground, and remote wires.

Speaker Outputs: The Kenwood KAC-9105D is equipped with two pairs of gold-plated speaker terminals for an easy parallel subwoofer connection. All four speaker terminals are 0.3125" wide screw terminals and will accommodate up to 8-gauge wire. A Phillips-head or flat blade screw driver (not supplied) is required to tighten/loosen the terminals. Spade connectors are recommended for the speaker wires.

Line Level Input: The mono-channel amplifier is equipped with a single pair of gold-plated RCA line level inputs.

Speaker Level Input: The KAC-9105D comes with a two channel speaker level input harness. Once you splice the speaker wires from the receiver to the harness, you have plug-in convenience to the amplifier. This feature makes it easier to add an amplifier to a factory radio or to a receiver with no preamp outputs. The maximum power output from the source receiver can be no more than 40 watts.

Line Level Output: The amplifier has a pair of gold-plated RCA line level outputs for feeding a full-range stereo signal to another amplifier. It is the same signal that is input through the line inputs. The amplifier's crossovers have no effect on the line level output signal.

Fuses: The KAC-9105D is equipped with three 30 amp ATO blade fuses.

Warranty Note

Warranty Note: This refurbished Kenwood product carries a 90-day warranty when purchased from Crutchfield. Kenwood offers Crutchfield customers an extra 60 days extended warranty beyond the 30-day Kenwood Limited Warranty for Refurbished Product that comes in the box.

Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team — they open the box, verify contents, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.

Kenwood KAC-9105D Reviews

Average Customer Review:

41 reviews
Review this product
Great Gear Giveaway

Submit a review and then enter to win a $500 rewards card

(0)
(0)
(0)
(0)
(0)

Review this product:

Thanks for taking the time to share your experiences about this product. Please be sure to focus your comments on the product itself. Read our Review Guidelines for more information.

Your email won't be visible. Please use the email address that is associated with your order.
(e.g., JohnD) Your review will be signed using the display name and location
(e.g., Charlottesville, VA)

Click on a star to rate the overall product on a scale of 1-5
1500 characters left
  Attach a YouTube Review
Crutchfield Video Review Guidelines
  • Only submit videos that you made or are authorized to use.
  • Do not submit videos that contain music, video or visuals that are copyrighted and belong to someone else.
  • Please see our Review Guidelines for more information.
500 characters left
500 characters left

Great Product!

Written By Anonymous, Georgetown, KY on Wednesday, April 30, 2014

Crutchfield Customer Review (What's this?)

This product met and to an extent, exceeded my expectations. Other than some cosmetic blemishes the product installed easy and gets the job done. Cannot beat for the money.

Pros: Small and compact Easy install Powerful Cost effective

Cons: Only 30 day warranty Few cosmetic blemishes

kac-9105d

Written By jdzridez, yuba city ca. on Thursday, April 17, 2014

Crutchfield Customer Review (What's this?)

this amp has a real nice amount of power you will be surprised of how well it performs I hooked it to a 12" mtx 8000series sub wired at a 2ohm load in a ported box it pounds the heck out of it great power for the size and price

Pros: small chassis and price great power

Cons: wish it had a remote gain switch

Kenwood amp

Written By Korey, Meeker oklahoma on Friday, April 11, 2014

Crutchfield Customer Review (What's this?)

Amp preformed good but didn't last to long went out about a month after purchase.

Cons: Discontinued

Good amp

Written By Anonymous, Miami ,ok on Sunday, February 23, 2014

Got this amp originally to power 2 kicker cvt 10's that 400 watts piece , i ran them at 2 ohms and didnt beak a sweat , but those weren't big enough so i got 2 fosgate p3's dual 2 ohm voice coils and wired them to .5 ohm yes half an ohm and puts out great and still doesnt get hot , good amp !

great amp

Written By bassman, Sauk City WI on Saturday, January 18, 2014

Crutchfield Customer Review (What's this?)

I like this amp it powers my two 400 watt suns with no problem.

Pros: Produces more than enough power

Cons: I haven't had anything bad with them

Great deal

Written By Theron, Gardner, ks on Wednesday, December 25, 2013

Crutchfield Customer Review (What's this?)

This amp is a great deal. It powers my Kenwood KFC W3013's very well. I push them hard all the time and this amp never seems to get hot

Pros: Built it fan, gives outstanding power

Cons: None

easy to install

Written By joshua, edgewater, new jersey on Friday, August 02, 2013

Crutchfield Customer Review (What's this?)

Its so easy to install and small. I recommend this item to all future purchases

happy accidents

Written By 13o13, lexington, va on Saturday, June 29, 2013

after i destroyed my last amp, i picked this one up, and have not been disappointed. nice and easy install, not too massive for my lil trunk, and it seems to soak up heat well. nice clean sound with lots of lil extras that are nice. being able to turn sub-sonic frequencies on or off is pretty awesome too. i likes to keep mine on:)

Pros: smooth sound, lil to no electrical interference, rca jacks make installs even easier

Cons: the size is the only thing i can think of, and thats only bc its sittin in a tiny trunk

Great AMP

Written By Anonymous, USA, Earth on Sunday, June 09, 2013

Crutchfield Customer Review (What's this?)

Bought this in the "bass package" with Kenwood subs. It sits in the rear of my Suburban. Very deep and satisfying bass. Never misses a beat.

Pros: Deep, clear Bass

Cons: None

This amp is insane!

Written By Zach, Eau Claire, WI on Sunday, June 02, 2013

  • "Coolness Factor"
  • Build Quality
  • Ease of Use
  • Sound Quality
  • Value

After doing some amp research, I was very disappointed when I found this amp retailed for this much. I only have two 10" Kenwood's, so I can't let this amp show its full potential yet, bet even having it turned down, the output is amazing. It can hold the low notes for longer than I can stand it! I would highly recommend this amp, and even if you cant find it for a cheaper price, it's worth the price!

Pros: Design, power ouput

Cons: Just a few dollars too expensive.

Kenwood KAC-9105D

Written By JerryP, Massillon, Oh on Monday, April 29, 2013

Crutchfield Customer Review (What's this?)

Purchased this amp as part of a subwoofer kit. Crutchfield took the guess work out matching up all the components. The combo works great!

Pros: Kenwood quality and tons of power

Cons: None

Doing me Justice!

Written By Greg G, Raefrod, NC on Saturday, April 20, 2013

Crutchfield Customer Review (What's this?)

Outstanding product! My amp blew out last year so I had to replace it; it didn't really do the job so I tried the Kenwood amp. I have no complaints; it sounds great and delivers great power.

Pros: great power delivery and great looks

Cons: NONE

Great amp but randomly stopped working

Written By john the sub guy, rochester, new york on Tuesday, March 26, 2013

Truly was a great amp running at 1 ohm to my dual voice coil polk audio dxi's. But after a good year of abuse the amp showed its age and just died. Checked everything and the amp simply fried out. At 900 rms u heard my cavalier coming from a quarter mile away. The amp hit real hard and the bass was clean but had some distortion. but it just simply wasnt solid in the long run. I may explore my options with another brand of amplifiers. But for the money I think kenwood is a little overrated. Anyone can make powerful amps. I dont think kenwood is one of the best anymore!

Pros: Powerful. Punchy. Deep.

Cons: Unstable. Didnt break my windshield..

Lovin' this amp

Written By Marcus, Navasota Texas on Thursday, March 14, 2013

I bought this amp for 2 Kickers CVX sub woofers about a month ago and ever since I installed it.... I've been loving it. The power it has to push my subs is great. Thanks to crutchfield advisor Shane I have the best system on the block

Kenwood KAC-9105D

Written By nico, burns Oregon on Friday, March 01, 2013

Crutchfield Customer Review (What's this?)

it's really excellent I haven't seen anything like this before but is great

Pros: I like it it sounds really clear now

Cons: everything is really positive on a in the Rue quit on me it works pretty good I love I'm in love with it

2 Alpine type R with 9105D

Written By Derrick S, Mi on Sunday, November 11, 2012

Amp is weak it does have power but cuts out very quickly ... I purchased this amp with a 2 year warrenty and have had too send it back twice already and its getting bad again and the warrenty is not up yet .... if you got cheap weak speakers then by all means buy this amp but anything like my type Rs nope they pull way too much outta this thing !!!!! all in all Im disappointed !!!!!!!

Kenwood KAC-9105D

Written By Jake, Lakeville, MN on Friday, October 05, 2012

Love the power it puts out. Plus the sleek, attractive look to it. I'm running this amp at 2ohms to two 12" Kenwood KFC-w3009's(older subs) and I can make it bump with maintaining quality sharp bass kicks in my sealed box. Before i was running these same subs to the earliest model of this amp, the KAC-9102d, but the 9105d dosen't seem to be hitting the highs or lows as well as the 9102d,(any suggestions?) but the 9105d still delivers mid frequencies with a very powerful kick that everyone is looking for in their setup! But i also think that is because the 9102d had a HPF as well as a LPF. So it let the desired note frequency in and hit. nonetheless it is a great amp worth the money!

Pros: Nice sound. Very sleek and versatile. Worth the price. Has some very nice features in the amp. Mid frequencies have a huge kick which could shake the block. Very powerful!!

Cons: No high-pass frequency.

Great Product!!!

Written By Lucas, Minot, ND on Friday, September 28, 2012

  • "Coolness Factor"
  • Build Quality
  • Ease of Use
  • Sound Quality
  • Value

I bought this amp for my older brothers alpine type r sub, and it works great. Now i am getting a jl audio v2 sub.

Pros: Easy to set up

Cons: the mounting screws and brackets didnt work, i had to buy new mounting stuff.

Unknown Issues!

Written By AudioPro78, KC on Thursday, June 14, 2012

  • "Coolness Factor"
  • Build Quality
  • Ease of Use
  • Sound Quality
  • Value

This for my friend I helped install with. The problems That others seem to be having sounds like low Voltage and/or Low Amperage That may require people to look into the Alternators! I installed 2 of these amps in my friends 86' 5.0 Mustang, and they are working great after upgrading the alt. to 120 amps. People need to remember that you can only get so much out of an alt. and the rest will have to come from somewhere or the amp will protect itself. Most amps are rated at 13.8-14.4 volts. Most alt. only put out 50 amps, but the vehicle needs most of those amps to run correctly. These amplifiers work very well if installed, and tuned correctly! Well worth the money!

Pros: 1ohm stable! Light weight!

Cons: Fan(s) could be more efficient!

updated review

Written By Alex, Denver Co on Monday, May 21, 2012

Wanted to update my last post. and start by apologising for my spelling not my strong point. I bought a 50 farad cap and the head light dimming went away for sure. Amp still cuts off. although its not as fequent as before, it still happens. my cap stores between 14.4 and 13.9 volts. After playing several songs, the amp cuts off when the cap reads 12.4 or lower. Im not sure what that means my guess is the amp is sucking so much power it cant handle the load and goes into protection mode. Since i bought the cap it seems silly to only run a single amp so i ordered two more sums and an amp and im in the process of hooking up my other amp for the door speakers. 4 more hours and ill have everything together.

Pros: simple install good sound 90% of the time

Cons: cutting out during high loads

Decent

Written By Alex, Denver colorado on Monday, May 14, 2012

I've had this amp for just over year and a half running two fosgate p2 at 2 ohms defently gives them a work out. Noticed incredible difference when I switch to deck with 4v outputs. I have same problem as others tends to cut out after running deep bass after a few mins the hitter the day the faster. I don't agree about the terminal size as stated by someone else, I got full 0 gage wire in without much hassle. After reading reviews here going to buy a compassator soon to see if it fixes the problem. Over all good amp never cuts out on rock music but can't make it through Beamer Benz or bently. If compassator doesn't correct problem I'll be buying new amp soon!

Pros: Price power

Cons: Cuting out dimming lights

Kenwood KAC-9105D

Written By bygboi, little rock, ar. on Sunday, April 01, 2012

Crutchfield Customer Review (What's this?)

I love this amp. I hooked it to a single kicker L7, and the more volume I give it, the more power it gives me back. An excellent buy for the money.

Expecting to be peased...

Written By gman.4791, Hawaii on Sunday, April 01, 2012

Crutchfield Customer Review (What's this?)

I don't have it installes yet, doing it today. But my battle buddy has this exact amp and is running two Alpine SWR-1522D With no problem at all so I am expecting that one Alpine SWR-1223D Will bump very hard. Thank you for the very good over the phone customer service and once again thank you and God Bless America and our troops.

not happy with bass power output

Written By Carlos C, Lake Worth,FL on Sunday, March 11, 2012

  • "Coolness Factor"
  • Build Quality
  • Ease of Use
  • Sound Quality
  • Value

Had it hooked it to my 2012 Kicker L7 wired at 2ohms, running 0 to 4 gauge wiring. The bass would hit but after a min of bass hitting then bass note would get weak. Cheap price though on amp but wasn't happy with performance.

Pros: Cheap.

Cons: Performance Sucks.

The Deal

Written By RickW, San Diego, Ca on Saturday, February 04, 2012

Crutchfield Customer Review (What's this?)

For the price nothing beats it.

Pros: Power

Cons: No gains control wired remote would be nice

Great amp

Written By bassheadjoe, Monroe,MI on Tuesday, January 31, 2012

I bought 2 of these amps. Awesome power. Only thing. I read it is suppose to have 2 fans. And on both of mine and a friends they do not have 2 fans. It is only 1 fan. But, they are in my 03 focus trunk and never over heater. Great power and reliable. Daily user. recommend this amp to everyone.

Pros: Small, powerful, fan cooled, almost everything about it.

Cons: Will not fit a 0 gauge for the power wire.

Great Amp, Could have better power terminals

Written By MaxS, Brookfield, CT on Sunday, October 09, 2011

Crutchfield Customer Review (What's this?)

I got this amp with 2 12" kenwood subs, so far the amp is great and I love it, I used this setup to replace an old MTX sub/amp kit that I have and I am glad I finally increased the power. I haven't had any problems with the amp or subs yet and I don't anticipate that I would either. I think some people that have problems with the setup might not have it setup correctly or most likely need a capacitor that can supply those deep base notes because it works great for me.

Like I said the only thing I was disappointed with they kenwood needs/should change is to make the power/ground terminals much bigger, and maybe even redesign them like some of the other high output amps I have so that they can fit 4 gauge wire much easier.. I had to trim the wire down quite a bit and even then it was hard to get in, I will be looking to get a longer gold plated screw to fix it if I can find one.

Kenwood KAC-9105D

Written By MIke, Sussex, NJ on Wednesday, September 07, 2011

Amp was great, paired it with two kenwood subs and sounds great, being the first time installing subs, it took time to tune in, but once tuned they were flawless.

Great amp!

Written By TurnHeading360, Tampa, FL on Thursday, September 01, 2011

Crutchfield Customer Review (What's this?)

Well, there sure has been a lot of people complaining these amps are cutting out on them. Worked just fine for me!

Not worth the money

Written By Greg, Nottingham, PA on Monday, August 08, 2011

This amplifier is so flawed. After checking with multiple installers apparently kenwood amps are notorious for cutting out problems. I personally like to play my subs loud and this amp cant handle any deep or powerful notes. i had it wired to two 12 inch kenwoods wired to 2 ohms and it would fade out whenever a deep or powerful note would hit. It got terribly annoying and i upgraded to the kicker 11zx750.1 and i couldnt be happier. Running at 930 rms (30 rms more then the kenwood claims at 2 ohms) i am getting so much more power. I got enough more that I blew one of my subs with everything turned well below half power. I could max out my kac9105d and it would play nowhere near as loud and cut out. Go kicker, forget kenwood

refurbished

Written By danm, boston on Saturday, July 09, 2011

Crutchfield Customer Review (What's this?)

its like it brand new but for half the price..... worth buying factory refurbished

worth every dollar

Written By ERIK, Colorado on Friday, June 03, 2011

Crutchfield Customer Review (What's this?)

running this amp for the last few weeks now... provides more than enough power to 2 twelve inch subs. At first i was surprised because this amp is so light i thought it was a cheap pile... but it delivers powers and its lightweight , which means it will cool faster. Overall Kenwood is great choice again.

Kenwood KAC-9105D

Written By Audberto, Cayey, Puerto Rico on Friday, April 29, 2011

Crutchfield Customer Review (What's this?)

Outstanding performance

Worked fine for a month

Written By mtxjackhammers, NY on Sunday, February 13, 2011

The amp worked fine for a month, then it started cutting out until it just stopped working.
After waiting three weeks for kenwood to fix it, it worked for three months and now the
same thing happened. I would never recommend anyone to buy anything kenwood after
the frustration that this amp put me through.

Don't Underestimate!

Written By Dallin, Utah on Tuesday, January 11, 2011

I've read many reviews that haven't been very positive about this amp. I'll tell you what, this amp rocks. I've been pushing two JBL 10's (soon to be JL Audio w3's), and it can push out more power than my subs can handle. My subs can handle quite a bit too! My dad can hear me coming up the street! I shake the house, it's just awesome. The only bad thing, it dims my lights pretty noticeably, so if you are looking for pushing this amp to the limit or farther than I'm pushing it, then you will at least need a good capacitor. Overall, this is a very good amp for the money. Everyone loves my sound system, except for cops. hahah. Very good amp!

Kenwood KAC-9105D

Written By Alex, Michigan on Wednesday, December 08, 2010

Crutchfield Customer Review (What's this?)

This amp is well worth the money. It pounds my 2 12 inch kenwoods insanely! I
would defiantly recommend this to everyone. You can hear me comin with this
amp. Provides the perfect amount of power to the subs. It also arrived next
day in shipping.

Refurbished No Problems

Written By Adreaneb, Dallas, TX on Monday, December 06, 2010

Crutchfield Customer Review (What's this?)

buying refurbished is not bad at all considering the pricing... haven't had any problems
with amp at all easy to install...im currently running it at 4 ohms powering 2 10" polk
audio subs rms 275 amp currently powering about 235-240 to each sub...so it sound
pretty darn great...this is a good powering amp if you are into accurate bass as i
am...eventually i will use amp at capacity @ 2 ohms for 500 rms subs will update at that
time!!!

Great product

Written By J-Rod, Russellville, AR on Tuesday, September 07, 2010

Crutchfield Customer Review (What's this?)

excellent product. provides plenty of power to my subs, with plenty of room to spare.
great heat management. I've run it at high volumes for several hours with it being in an
enclosed location and its never gotten too hot. looks great (lights are a bit much) and
set up is a breeze.

Strong clean looking amp

Written By Matt, Austin, Tx on Wednesday, September 01, 2010

I got this amp hooked up to 2 10" alpine type-r's. Its a perfect match for them with 300
watts to spare. I hooked it up to 2 ohms and it makes these 10s flex! Stays cool thanks
to 2 built in fans. Also looks slick

Kenwood KAC-9105D

Written By nlghtcrawler, Roswell NM on Friday, May 07, 2010

Crutchfield Customer Review (What's this?)

Great amp worth every penny, it pounds my 2 12" Kicker CVR's HARD!!

Kenwood KAC-9105D

Written By Russell, Cape Breton, NS on Sunday, April 11, 2010

Awsome amp. pounds my 2 excelon 12's pretty good, but i need larger power and ground wires. ill give it a 5 stars when i stop popping fuses! lol

Get everything you’ll need to enjoy your new Kenwood KAC-9105D

You'll need an amp wiring kit to install your new amplifier, as wiring is not included.
Bring the music from your amp to your speakers.
Patch cables take the music from your stereo to the amplifier. Most amp wiring kits don't include them.
For multi-amp systems, you'll need a separate fuse holder.
Helps protect your car's charging system and improves power handling. Required power and ground wires not included with cap.
The right tools will make the installation easier.
Have your new amplifier put in by a qualified professional in your area.
Rockford Fosgate RFK4

Rockford Fosgate RFK4

4-gauge amplifier power wiring kit

Item #: 575RFK4

(10)

$114.99
Add to Cart
Rockford Fosgate RFK4X

Rockford Fosgate RFK4X

Complete 4-gauge amplifier wiring kit
Includes patch cable and speaker wire

Item #: 575RFK4X

(12)

$159.99
Add to Cart
EFX PA4BX Wiring Kit

EFX PA4BX Wiring Kit

4-gauge amplifier wiring kit — includes 2-channel patch cable

Item #: 142PA4BX

(5)

$79.99
Add to Cart
T-Spec 16-gauge Speaker Wire

T-Spec 16-gauge Speaker Wire

Black/white jacket — priced per foot

Item #: 120SW16WB1

(13)

T-Spec 12-gauge Speaker Wire

T-Spec 12-gauge Speaker Wire

Black/white jacket — priced per foot

Item #: 120SW12WB1

(30)

T-Spec 2-Channel RCA Patch Cables

T-Spec 2-Channel RCA Patch Cables

Available in 7 different lengths (17-foot)

Item #: 120RCA172

(27)

$19.99
Add to Cart
EFX 17-foot RCA Patch Cable

EFX 17-foot RCA Patch Cable

Item #: 142A17C

(55)

$7.99
After $2.00 Savings Add to Cart
EFX CFHG4 Fuse Holder

EFX CFHG4 Fuse Holder

In-line AGU fuse holder accepts 4- to 8-gauge wire

Item #: 142CFHG4

Rockford Fosgate RFFAGU Fuse Holder

Rockford Fosgate RFFAGU Fuse Holder

Platinum-plated AGU fuse holder
Fits 4- or 8-gauge cable

Item #: 575RFFAGU

(25)

$10.99
Add to Cart
T-Spec Capacitor

T-Spec Capacitor

1.5-farad capacitor with red LCD meter

Item #: 12015DDC

(11)

$79.99
Add to Cart
Metra Crimp Tool and Connectors

Metra Crimp Tool and Connectors

Package contains crimp tool and over 150 pieces

Item #: 120CRIMPKT

(15)

$19.99
Add to Cart
S&G Wire Cutter/Stripper Tool

S&G Wire Cutter/Stripper Tool

Cuts and strips 12- to 22-gauge wire

Item #: 18119100

(15)

$19.99
Add to Cart
S&G Tool Aid 87650

S&G Tool Aid 87650

Door Trim and Panel Removal Tool

Item #: 18187650

(69)

Pro.Fit Wire Worm

Pro.Fit Wire Worm

Installation tool helps route wiring through tight spaces

Item #: 042DM4533

(33)

$12.99
Add to Cart
Bojo Trim Panel Tools

Bojo Trim Panel Tools

Set of 6 pry tools — helps remove interior and exterior trim and door panels

Item #: 126CR6NGL

(52)

$24.99
Add to Cart
Skewdriver Pro SPK4042

Skewdriver Pro SPK4042

Ratcheting straight and offset screwdriver set with 40 bits (Skewdriver Pro with ratchet handle, pictured)

Item #: 180SPK4042

(8)

$49.99
Add to Cart
Bojo Trim Panel Tools

Bojo Trim Panel Tools

Set of 6 pry tools — helps remove interior and exterior trim and door panels

Item #: 126CR6LNGL

(2)

$29.99
Add to Cart
InstallCard: Amp or Equalizer

InstallCard: Amp or Equalizer

Prepaid professional amplifier or EQ installation

Item #: 597421003

(18)

$79.99
Add to Cart

Questions & Answers Ask the community. Share your knowledge.

2 questions already asked

If you purchased the product from Crutchfield, feel free to contact our Tech Support team. Our toll-free Tech Support number is printed on your invoice, and is also available under the "My Orders" tab in the "My Account" section of our website. If you did not purchase the unit from Crutchfield, then you may want to contact the manufacturer. You can also post your question in our forums: http://community.crutchfield.com. Or try our online support center: http://crutchfield.custhelp.com/app/answers/list/kw/. [ Jeff  Jan 07, 2014 ]  Staff