Kenwood Excelon X700-5
Crutchfield Customer Review (What's this?)
Our experts help you pick the ideal gear for your needs.Meet our advisors
Free tech support for the life of your gear.Read about our one-on-one expert help
You may return items that are complete and like new for any reason within 60 days.See the details of our return policy
Earn one point for every dollar you spend and use those points to save on future purchases.Get full details on Crutchfield Rewards
We offer vehicle-specific installation instructions, dash kits, wiring harnesses, and speaker accessories at deeply discounted prices with car stereo and speaker purchases. Available for most vehicles.Learn more
Our customers have trusted us with their business, and they’ve helped us win awards for our service.Check out our most recent awards
The manufacturer’s warranty always applies.See more details
Item #: 613X7005
$199.99 Earn up to 200 Rewards points
Distributes the power for your whole system
This sweet-looking Kenwood Excelon X700-5 5-channel amplifier can power your entire system, serving 40 watts RMS each to four full-range speakers while delivering up to 500 watts RMS to your sub. Got a nice set of components up front? You can switch the amp over to 3-channel mode, driving your components with 100 watts a side while still giving a sub a healthy 500 watts RMS of power.
Tuning where you need it
High-pass filters on the front and rear channels let you tailor the sound to fit your vehicle and speakers. You can adjust the low-pass filter and a bass boost on the subwoofer channel to get just the right bass for your vehicle, while optimizing your sub's performance.
The unique fin shape of the extruded aluminum heatsink helps pull heat away from the amp's interior, reducing distortion and extending the amp's life. An intelligent thermal management system continually monitors the temperature and turns on a cooling fan when necessary, saving your music from any interruptions due to overheating.
Average Customer Review(s):
I went to a local shop to have my brand new Polk audio speakers replaced because I hated them. The shop owner, although very willing to sell me his speakers(he doesn't sell Polk)said he thought he could help. He sold me this amp, hooked it up and tuned them right. i can't believe the difference. Tomorrow I'll be plugging in a sub to finish the system. I love the fact that I can run the entire system off one amp. The sound I get now is crisp and clean and Very loud. I can't wait to see what the sub sounds like.
Pros: Space saver, a lot of bang for your buck
Cons: None that I know of.
I was looking for a amplifier that would power all my system and this is a good one 5 channel for all your speakers and the sub as well cooling fan helps with the over heating so never shuts down. ..I recommend this amp
Pros: Very versatile in the way of the set up
Cons: Can't find one get sorry
Excelent performance, works pretty well, no complain move my kicker CVR flawlessly. I have two complains but are relatively minors don't alter my 5 stars review.
Pros: Great Compact Size Great Quality Cooling fan very good to avoid the unit to be extra hot
Cons: A little bit heavy for its size Screws size are too small you have to use Y connector to make the connection easier.
Without the amp the new speakers are so ordinary. This amp is more than enough. With the high and low pass filters you can get the correct sound for your ears.
Pros: The 5 channels allow for the sound to be customized.
So clean and powerful. I am running an active crossover, and the front mids off one set of channels and the tweeters off of the other set of channels. I cannot believe I waited so long to run a setup like this. I am also running a 12" sealed sub off the the sub channel at 2 ohms, until I get my custom fiberglass box made for my JL's, and it pounds the 12 so hard and smooth. I will be buying another eXcelon amp for more subs in my car without a doubt.
Pros: Price, looks, sound, quality.
Great amplifier for what I needed. Provides great power to my component speakers throughout the vehicle & the sub-woofer. Overall this is a great amp if you are wanting to enhance the sound quality of your vehicle.
Pros: Provides good power (watts) to you speakers & sub-woofer without having to buy two separate amplifiers i.e. (4 channel amp & mono for the sub)
A nice, slim, space saving amplifier. Mounted a vertical, under back window of a 2001 Ford Ranger, extra cab. Just got it mounted and wired in, so I have not really had time to play with it, and make any adjustments to the sound! Too much other garbage, dirt, dust etc...to worry about, for an under seat mount. Even without adjustments, it pumps plenty of sound through the new Pioner speakers also recently installed. No subwoofer yet, hope to have that complete in about an hours time tomorrow.
Pros: Slim space saving unit.
Cons: Nothing to speak of yet!
Simple setup and clean power throughout its range. I wish Kenwood still made home audio as well - I've never got rid of a Kenwood product because it failed, only because it was ten or twelve years old and out of date.
Pros: Nice sound, easy setup, resonable price.
Awesome Amp! Paired perfectly with my Kenwood deck.
Pros: Easy to hook up once you run the wires. Low profile unit fit perfectly under the passenger seat.
Great compact amp. Great amp for a pair of components and sub.
Got this amp to replace a jbl 5 channel amp that died on me. So far I like the amp. It has plenty of power to provide your entire system.
Pros: It is a small that does not take up a lot of space.
Cons: None so far.
I am extremely satisfied with this amplifier. It was very easy to install and operate. I am very happy that I can control my front speakers, rear speakers and subwoofer from one amplifier!
Pros: Ease of hook up and operation
bought this one for a clearance refurbished I guess for the price you can't go wrong good sounding easy to hook up
Pros: powers all my speakers in my carsounds great
Cons: no complaints wish they gave out deals like this more often
I bought a factory refurb...I'm super satisfied!!! Same great quality product without the price tag being so high. It pushes the system (2 sets of kicker components and 1 MTX thunderform 12). I was able to tuck it under my rear seat and it's outta sight and outta mind.
Pros: Plenty of power!
Great amp for the price, delivers plenty of sound. Paired with a 4 ohm JL 10" in my Durango can be tuned from the head unit I choose to have balanced highs, mid's, and low's or can be cranked up to make your neighbors talk about you when you come in from work each day..
Pros: Great powerful sound!
I was upgrading the equipment in my civic and came across this amp... I couldn't afford the alpine pdx series since I wanted an amp that powered everything... For the price I couldnt pass it up... Got it the next week and had it professionally installed.... Couple days later it made a Loud horrible thumping sound when I turned my head unit on, then I smelled something burning.... Saw smoke coming from it... Crutchfield was excellent an had another one 4 days later.... Never had a problem since..... Powers everything to the max.... I can't turn the volume passed 28 and it goes to 35!
Pros: Excellent amp for the price Plenty of power for the speaker set up Easy to fine tune Very small
Cons: Not any that I can think of
This amp is small and easy to mount. Pushing 2 pair of 6x9. In the doors and a pair of alpine e 10' inch in a down fire box. Very clean power and the gains are easy to understand. It pushes the tens to the limit and they hit hard, even in the downfire box
Pros: Easy to install and small enough to mount under seat
Cons: Nne right now
i wired this in conjunction with a Audio Control LC6i Line Output Converter in order to keep my factory radio. it is awesome!
Pros: 5 channels, built in cross overs, easy to set up.
Cons: no high inputs. you need a set of RCA cables for each channel (front, rear and subwoofer).
|RMS Power Output (Watts x Channels)||
40 x 4
300 x 1
|Peak Power Output (Watts x Channels)||104 x 4|
|Power at 2 Ohms (Watts x Channels)||50 x 4|
|Bridged Power (Watts x Channels)||100 x 2|
|Minimum Impedance Bridged||4|
|Minimum Impedance Unbridged||2|
|Best Frequency Response||5-50k Hz|
|THD at Rated RMS Power||1%|
|Signal to Noise Ratio||80 dB|
|Low-Pass Crossover Frequency||50-200 Hz|
|Low-Pass Slope (dB/octave)||24 dB/oct|
|High-Pass Crossover Frequency||50-200|
|High-Pass Slope (dB/octave)||12 dB/oct|
|Bass Boost||0-18 dB|
|Bass Boost Frequency||40 Hz|
|Speaker Level Inputs||No|
|Parts Warranty||90 Days|
|Labor Warranty||90 Days|
Multi-Channel Design: The X700-5 is basically three amps built into one chassis, two full-range 2-channel amps (A and B), typically powering the front and rear speakers, and one mono amp to power a subwoofer. Either of the full-range amps can also be bridged to one channel.
CEA-2006 Compliant: CEA-2006 is a system of testing and measurement methods for mobile audio amplifiers. This voluntary standard advocates a uniform method for determining an amplifier's RMS power output and signal-to-noise ratio. The criteria for measuring power uses a DC input voltage of 14.4 volts and the RMS power output is measured into a 4-ohm load, with 1% or less Total Harmonic Distortion plus noise (THD+N), and over a frequency range of 20 Hz to 20 kHz (when applicable). Signal-to-Noise ratio is measured in weighted absolute decibels (dBA) at a reference of 1 watt into 4 ohms. CEA-2006 allows consumers to compare car amplifiers and receivers on an equal basis. Using CEA-2006 criteria, the Kenwood X700-5 is rated at 40 watts RMS x 4 plus 300 watts RMS x 1 with an 80 dBA signal to noise ratio.
Specifications: The manual also lists these non CEA-2006 compliant specifications:
Cooling Fan: There is a cooling fan to help dissipate heat and ensure cool, reliable operation. Make sure not to block the vents or the fan when installing the amplifier.
Input Sensitivity: The X700-5 features independent gain controls for the front, rear, and subwoofer channels. The input sensitivity of each is adjustable from 200 mV to 5.0 volts.
High-Pass Filter: The front and rear amps have individual switches to set the built-in crossovers to high-pass or off (full-range). The crossover points are independently adjustable from 50-200 Hz. The high-pass crossover slope is 12 dB/octave.
Low-Pass Filter: The subwoofer channel's low-pass crossover is always engaged (it cannot be bypassed). The crossover point is adjustable from 50-200 Hz and the slope is 24 dB/octave.
Bass Boost: The subwoofer's bass boost circuit is centered at 40 Hz; boost is variable from 0 to +18 dB.
Aluminum Heat Sink: The aluminum heat sink increases the amplifier's heat dissipation efficiency, increasing the life of the amplifier.
Power And Ground Terminals: The amplifier features screw terminal power and ground terminals. They will accommodate spade connectors up to 0.55" wide.
Remote Turn-On Terminal: The remote turn-on is a screw terminal that will accommodate a spade connector up to 0.35" wide.
Speaker Terminals: The five pair of speaker terminals are screw terminals and will accommodate spade connectors up to 0.35" wide.
Signal Inputs: The amplifier features three pair of RCA input connections, A, B, and Sub.
Fuses: Two 40-amp ATO fuses are installed in the amplifier chassis.
Warranty Note: This refurbished Kenwood product carries a 90-day warranty when purchased from Crutchfield. Kenwood offers Crutchfield customers an extra 60 days extended warranty beyond the 30-day Kenwood Limited Warranty for Refurbished Product that comes in the box.
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.
friend recommended the brand and channel capability. [ JOSE Feb 22, 2016 ]
Looking for an ampiflier that can power up everything from one ampiflier. I am always a kennwood fan. As soon I saw this went on sale I went for the deal. Also this amp have a fan cooling system so I am hoping the amp will never overheat. I will be using this amp in 2003 jeep grand cherokee with a 12 inch sub and aftermarket speakers. This amp should be plenty of enough juice for me. [ Brian Feb 18, 2016 ]
I've been waiting to get a new 5 channel Kenwood x700-5 since my old tired Kenwood kac-744 finally quit on me after I let my 21 year old son borrow my 1993 jeep wrangler to go to work so I believe everything happens for a reason I deffenently got my moneys worth out of the old Kenwood that's why I bought another one! Thanks crutchfield for giving me this opportunity that is in my price range. [ Glenn Mar 30, 2016 ]
Yes it can. [ JAY Jun 19, 2015 ]
Yes u can [ DARYL Jun 19, 2015 ]
This is a hybrid amp. The full range channels are digital so cooling requirements are very low. The sub amp module is analog and high power. It also has a very low profile for such a powerful amp. I have this amp mounted behind the rear seat-back of my pickup. I had to mount it as close to the floor as possible but it fits just fine. I shaped a piece of plywood to bolt into existing factory holes on the back bulk-head. I then mounted the amp and four crossovers to the wood base and then bolted all that into the truck. I can easily disconnect the signal wires and then remove the whole assembly. I run it at high volumes all the time and have never had a problem. I'm using 2-way Helix speakers and JL sub. [ RODGER D Apr 22, 2015 ]
Charles, I bought this amp about 6 months ago to mount in my party bus. I had same problem of wanting it out of harms way ( especially in a party bus). I screwed mine right to the wall behind a seat above a heater and have not had one single problem. This amp has a fan in it and as far as I can tell it does not get close to hot the way I have it mounted. Also it is almost always cranked all the way up for hours. Hope this helps !!! [ JUSTIN ROBERT Apr 14, 2015 ]
Should be no problem. My brother mounted his amp there in his Ranger extra cab. I'll post a pic for you soon [ digital team Apr 14, 2015 ]
You can easily mount to the cab wall. I put mine under Tacoma drivers seat and it is angled up and cockeyed some. Venting is a non-issue as it sucks front to back. My goal was just for security, ease of access, and keeping things looking stock. Cables connected easily even with the odd mounting. It's small and thin so easy to put just about anywhere. [ Hugh Apr 14, 2015 ]
Front and rear are independent of the sub. The power output (in Watts) of the unit is shown as 4x40 (4ohm) and 1x300 (4ohm) for a single voice coil subwoofer or 4x50 (4ohm) and 1x500 (2ohm) for a dual voice coil subwoofer. I have a JL audio dual voice coil subwoofer so my amp runs 4 ohm to each of the front & rear speakers and 2 ohm to the sub. Sounds like that is what you are looking for. Take a look at the manual. It's on Kenwood's website here: It pays to take some extra time to make sure your components are all compatible before dropping the cash. [ Matthew Mar 30, 2015 ]
When using this amp for only 3 channels you could use the front and rear pair of RCA's and bridge the outputs to increase power to your front 2 channels and use the sub output for the sub. [ CLYDE Jun 23, 2014 ]
i would use the front rca jacks and the sub rca jacks. i have mine hooked up to 5 speakers and it is a great amp. [ WILLIAM Jun 23, 2014 ]
You will want three sets of RCAs. Left, right, sub. Left and right each include front and rear. [ Robert Jun 23, 2014 ]
No the amp does not have an input for any type of remote gain adjustment, like a bass boost knob or anything like that. It does have gain adjustments for all 3 pairs of channels, as well as a "bass boost" adjustment, but nothing remote. [ Trevor Oct 12, 2015 ]
I had one installed. This doesn't include that option. However the amp has good sound. [ John Robert Oct 11, 2015 ]
Sorry that I can't help you with your question, I'm using it without the level controller, don't have one to try it out. [ Daryl Oct 11, 2015 ]
No, there is no remote level control with the amp [ Corbin Oct 12, 2015 ]
Dont know [ Mike Oct 11, 2015 ]