Pure, powerful sound that connects you to the heart of your music

This high-performance integrated amplifier from Marantz does what great amps are supposed to do. It delivers your music to your speakers or headphones without adding or subtracting anything. The emotions the artists meant to convey come through as intended, with all the power and subtlety captured in the recordings.

Flexible connections

You get six unbalanced RCA inputs for hooking up your audio components, including a phono input for a turntable with a moving magnet or moving coil cartridge. High-quality WBT speaker binding posts ensure a solid connection for maximum power transfer to your speakers. This integrated amp makes a great choice for high-resolution music sources, like Super Audio CD and vinyl.

Marantz PM-15S2 back panel

You get plenty of inputs for your source components, including a fully discrete Constant Current Feedback phono stage that supports both moving coil and moving magnet cartridges.

Great sound runs in the family

For a perfect sonic match, check out Marantz's SA-15S2 CD/SACD player or TT-15S1 turntable.

Product Highlights:

  • 90 watts x 2 channels into 8 ohms (20-20,000 Hz) at 0.05% THD
  • 140 watts x 2 channels into 4 ohms (20-20,000 Hz) at 0.05% THD
  • Current Feedback amplification tracks music signals faster for more natural sound
  • frequency response: 5-100,000 Hz (±3dB)
  • signal-to-noise ratio: 89dB line, 86dB phono (MM), 75dB phono (MC)
  • 6 RCA audio inputs (including phono input for moving magnet and moving coil cartridges)
  • 1 RCA preamp output, 2 RCA record outputs
  • precision WBT binding-post speaker connectors
  • biamp/stereo switch lets you biamp your speakers using two PM-15S2's for even higher-fidelity sound
  • full-size headphone output
  • remote control
  • detachable power cable
  • black finish
  • 17-3/8"W x 4-7/8"H x 18-7/8"D
  • weight: 40.8 lbs.
  • warranty: 5 years
  • Our 60-day money-back guarantee

Everything you always wanted in a stereo receiver, except the radio

An integrated amplifier is essentially a receiver without a built-in AM/FM tuner. You get power to drive your speakers, audio controls, and inputs for music source components. Connect an iPod, a computer, a network music player, or any other device that can play Internet radio, and you may find you have no need for an AM/FM radio.

Hands-on research

What's in the box?

Download owner's manual

  • PM-15S2 Integrated amplifier
  • 70" Power cord
  • Wireless remote control (RC001PM)
  • 2 "AAA" batteries
  • User Guide (English/ French/ German/ Dutch/ Italian)
  • Warranty information (USA and Canada)

Features and Specs

Watts RMS per Channel (8-ohms) 90
Watts RMS per Channel (6-ohms) ---
Watts RMS per Channel (4-ohms) 140
Frequency Bandwidth 20-20k
THD 0.05%
Minimum Impedance 4 ohms
Signal to Noise Ratio 89
Number of Inputs 6
Phono Inputs Yes
Preamp Outputs Stereo
Width (inches) 17-3/8
Height (inches) 4-7/8
Depth (inches) 18-13/16
Weight (pounds) 40.8
Parts Warranty 5 Years
Labor Warranty 5 Years

Product Research



HDAM (High Definition Amplifier Module): Marantz uses HDAMs instead of standard op-amps, rendering a more dynamic sound and less susceptibility to radiated noise, heat, and vibration. For improved circuit stability and high-speed processing the PM-15S2's HDAM SA3s are mounted on the voltage-current conversion block.

Current Feedback Phono Equalizer: The phono equalizer in the PM-15S2 supports moving coil (MC) and moving magnet (MM) cartridges and maintains current feedback circuit at a constant level within the audible range; resulting in a smooth sound and less noise.

Input Buffer: An input buffer amplifier using the HDAM SA2 is mounted just after the CD input jacks to maximize CD and SACD sound quality.

Linear Control Volume: The volume control amplifier is a combination of the MAS6116 from MAS and the inverse NF-type current feedback amplifier. The amplifier section adopts a fully discrete design, combining the HDAM-SA3 and HDAM-SA2.

Power Transformer: A Toroidal power transformer is used in the PM-15S2 because it produces less vibration and magnetic leak than ordinary laminate design transformers. The transformer has a non-magnetic aluminum shielding case.

Floating Control Bus System: A Floating Control Bus System (FCBS) is a two way communication system that enables you to connect up to four PM-15S2s and control them simultaneously. This makes a number of applications possible, including bi-amplifying and multi-channel (surround sound, multi-channel SACD, etc) applications.

Bi-Amp Mode: You can connect the PM-15S2 in a bi-amp configuration and separately power the high frequency and low frequency drivers in a speaker. When two PM-15S2s are connected via the Floating Control Bus System (FCBS) in bi-amp mode, each works as a monaural integrated amplifier. The Operating Mode switch on the back panel should be set to Bi-Amp and the speaker must support bi-amp connections.

Display: The PM-15S2 has an LCD to display input source and volume level. Compared to other types of display panels, the LCD generates less drive noise and radiated noise, hence the effect on sound quality is minimal. The input source and volume level are displayed normally. The display and illumination can be turned off if desired.

P.Direct: The P.Direct feature uses just the PM-15S2's amplifier, bypassing the volume control and all other pre-amp features. There are dedicated P.Direct RCA inputs on the rear panel and the feature is turned on/off on the front panel, so the PM-15S2 can power one pair of speakers in two different systems, easily switching between them.

Remote Control: The RC001PM wireless remote will control the PM-15S2 and Marantz tuners, Super Audio CD players, CD players, and DVD players.


Front Panel:

  • Input Selector: rotary knob selects the input source for listening
  • Display: turns the display and illumination lamp on and off. When off, the display lights up for approximately 2 seconds when the Volume knob or other control is operated.
  • Tone: turns the bass and treble tone controls on and off
  • Speakers: turns the speaker outputs on and off
  • ATT: the attenuate button has three settings; -20 dB (factory setting), -40 dB, and -infinity (mute)
  • P.Direct In: on/off; use the PM-15S2 as an amplifier
  • Phono MC: switches the phono equalizer between moving coil and moving magnet settings
  • Bass: rotary knob; +/-10 dB @ 50 Hz
  • Treble: rotary knob; +/-10 dB @ 20 kHz
  • Power: on/off

Rear Panel:

  • Operating Mode Switch: set the operation of the amplifier to Stereo or Bi-Amp


Rear Panel:

  • Speakers: the Left and Right speaker outputs are binding posts; not 5-way posts, but will accept single banana plugs, pin connectors, spade lugs up to 0.525" wide, and bare wire up to 10 gauge
  • Line Inputs: stereo RCA input jacks for CD, Line 1, and Line 2
  • Recorder: stereo RCA input and output jacks for Recorder 1 and Recorder 2
  • Phono: stereo RCA jacks and phono ground screw; compatible with moving coil and moving magnet cartridges
  • Pre Out: stereo RCA outputs for feeding a powered subwoofer or another amplifier
  • P.Direct In: stereo RCA inputs for P.Direct mode
  • Floating Control Bus System: 3.5mm mini-jack input and output

Front Panel:

  • Headphone: standard 1/4" headphone jack



  • Power: 90 watts x 2 into an 8Ω load or 140 watts x 2 into a 4Ω load, 20 Hz - 20 kHz, both channels driven simultaneously
  • Total harmonic distortion: 0.05% (both channels driven from 20 Hz to 20k Hz into an 8Ω load)
  • Output band width: 5 Hz ~ 40 kHz (8Ω load, 0.05%)
  • Frequency response: 5 Hz ~ 100 kHz (CD, 1W, 8Ω load)
  • Damping factor: 100 (8Ω load, 20 Hz - 20 kHz)
  • Input sensitivity/Input impedance:
    • Phono (MC): 270μV/100Ω
    • Phono (MM): 2.7mV/47kΩ
    • CD/Line: 240mV/20kΩ
    • P.Direct: 1.7V/20kΩ
  • Output voltage/impedance: 1.7V/220Ω
  • Maximum allowed Phono input (1 kHz)
    • MC: 15mV
    • MM: 150mV
    • RIAA deviation: ±0.5dB (20 Hz ~ 20 kHz)
  • S/N (IHF-A, 1W, 8Ω load)
    • Phono (MC): 75 dB (0.5mV input)
    • Phono (MM): 86 dB (5mV input)
    • CD/Line: 89 dB (500mV input)
  • Tone control:
    • Bass: ±10 dB @ 50Hz
    • Treble: ±10 dB @ 20kHz
  • Power requirement: AC 120V 60Hz
  • Power consumption:
    • UL60065: 220W
    • EN60065 7th Ed: 220W
  • Weight: 40.8 lbs (18.5 kg)

Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.

Marantz PM-15S2 Reviews

Average Customer Review:

1 reviews
Review this product
Great Gear Giveaway

Submit a review and then enter to win a $350 rewards card


Review this product:

Thanks for taking the time to share your experiences about this product. Please be sure to focus your comments on the product itself. Read our Review Guidelines for more information.

Your email won't be visible. Please use the email address that is associated with your order.
(e.g., JohnD) Your review will be signed using the display name and location
(e.g., Charlottesville, VA)

Click on a star to rate the overall product on a scale of 1-5
1500 characters left
  Attach a YouTube Review
Crutchfield Video Review Guidelines
  • Only submit videos that you made or are authorized to use.
  • Do not submit videos that contain music, video or visuals that are copyrighted and belong to someone else.
  • Please see our Review Guidelines for more information.
500 characters left
500 characters left

Great Integrated Amp

Written By JerryP, Robinson, IL on Monday, October 29, 2012

Crutchfield Customer Review (What's this?)

This amp exceeded all of my expectations! It is beautiful to look at, quiet as a graveyard and flexible enough to handle all of the inputs I send it. I am using it with my Martin Logan Vista electrostatic hybrid speakers and could not be more pleased. These are very revealing speakers, but the Marantz has been up to the task. It replaces separate pre-amp/power amp combination that had always exhibited a slight buzz (probably a capacitor going bad in the pre-amp). The Marantz is dead quiet; and I mean DEAD quiet, even with the ear next to the speaker! It offers excellent sound as well with no hint of harshness or compression during louder passages. The internal MM/MC phono stage is excellent and again very quiet, even with the MC selected (I use a Denon DL-301II cartridge). I am very pleased!

Pros: Solid build. Extremely attractive design. Flexibility, including on-board MM/MC phono stage, switchable from the front panel. Pleasant display that can be turned off when not needed. Sufficient inputs, including 2 tape decks (THANKS!!), 2 line inputs and the MM/MC phono inputs. Can be used (I haven't tried) as a power amp or as a pre-amp, should the need arise. Substantial and solid. Nice speaker binding posts. Remote volume control works wonderfully in 0.5 dB increments (gradual).

Cons: No balanced inputs and no digital inputs (I don't require, but some may wish to have them). Otherwise I can't think of a thing!

Get everything you’ll need to enjoy your new Marantz PM-15S2

Connect your speakers to your new amp using superior grade wire for the best results.
Have your new equipment installed by qualified professionals.
Premium audio cables help deliver premium sound quality.
Protect your investment from power surges and interference.
Original Monster Cable

Original Monster Cable

With gold pin connectors (15-foot pair)

Item #: 119OMC1515


Add to Cart
AudioQuest Type 4

AudioQuest Type 4

Speaker cables with pre-attached banana connectors (10-foot pair)

Item #: 703T410BFS


Add to Cart
AudioQuest Golden Gate

AudioQuest Golden Gate

Stereo interconnect cable with RCA plugs (0.6 meter/2 feet)

Item #: 703GGRR06M


Add to Cart
Monster Cable Stereo Audio 200i

Monster Cable Stereo Audio 200i

Stereo interconnect cables with RCA plugs (2 meters/6.6 ft.)

Item #: 119MC2002M


Add to Cart
AudioQuest Big Sur

AudioQuest Big Sur

Stereo interconnect cable with RCA plugs (0.6 meter/2 feet)

Item #: 703BSRR06M


Add to Cart
AudioQuest Sydney

AudioQuest Sydney

Stereo interconnect cable with RCA plugs (0.6 meter/2 feet)

Item #: 703SDRR06M


Add to Cart
AudioQuest Columbia

AudioQuest Columbia

Stereo interconnect cables with RCA plugs (2-meter/6.6 feet)

Item #: 703CMB2MR


Add to Cart
AudioQuest Evergreen

AudioQuest Evergreen

Stereo interconnect cable with RCA plugs (0.6 meter/2 feet)

Item #: 703EGRR06M


Add to Cart
Panamax M5300-PM

Panamax M5300-PM

Power line conditioner and surge protector

Item #: 299M5300PM


Add to Cart
Furman Elite-15 PFi

Furman Elite-15 PFi

Power line conditioner and surge protector

Item #: 756ELT15PF


Add to Cart
Panamax M5400-PM

Panamax M5400-PM

Power line regulator and surge protector

Item #: 299M5400PM


Add to Cart
Furman Elite-20 PFi

Furman Elite-20 PFi

Power line conditioner and surge protector

Item #: 756ELT20PF

Add to Cart
Panamax MR4300

Panamax MR4300

Power line conditioner and surge protector

Item #: 299MR4300


Add to Cart
Panamax MR4000

Panamax MR4000

Power line conditioner and surge protector

Item #: 299MR4000


Add to Cart
Panamax MR5100

Panamax MR5100

Power line conditioner and surge protector

Item #: 299MR5100


Add to Cart
AudioQuest NRG-2

AudioQuest NRG-2

High-quality replacement AC power cable (6 ft.)

Item #: 703NRG26F


Add to Cart