Overview: The Mirace OMD-C1 is
a dedicated three-way center channel that features Mirage's OMNIPOLAR technology
and Mirage's OMNIGUIDE design. The center speaker comes in a gloss black finish
with removable black cloth grille.
OMNIPOLAR Technology: This
sound in a perfectly spherical dispersion pattern, expanding the sweet spot to
encompass virtually the entire room.
OMNIGUIDE Design: The design
consists of a conically
shaped cylinder that is responsible for reflecting sound in a perfect 360 degree
pattern. This unique design guarantees the same tonal balance and dispersion
characteristics no matter how and where you mount the speakers.
- The speaker should be inverted
with grille facing downwards when it is mounted above 6 feet.
- The speaker should be mounted
normally with the grill facing up when it is mounted below 6 feet.
The OMD-C1 is designed for use as a Front or Rear center channel in Home Theater
surround sound applications.
Voice Matching: The center channel is
voice matched with the following family of Mirage speakers - Mirage's OMD-28 or
OMD-15 floor standing speakers, Mirages OMD-5 bookshelf/satellite speakers and
Mirage's OMD-R rear surround speakers.
Mirage OMND-S10 subwoofer is recommended for the OMD-Mirage family of
Video Shielded: The speaker is magnetically shielded so you can place
it on or next to your
television without distortion.
Drivers: The drivers used in
the OMD-C1 are as follows:
The speaker features two 5.5" poly titanium deposit hybrid woofers with
ribbed elliptical rubber surrounds.
- Midrange: The OMD-C1 also
features a 4" poly titanium deposit hybrid midrange driver which directs the
sound into the OMNIGUIDE module of the speaker cabinet.
- Tweeter: Floating above
the midrange is a precisely angled cast aluminum OMNIGUIDE module that
houses the speaker's proprietary 1" PTH tweeter.
Enclosure: The sealed cabinet is made of very solid inert medium density fiberboard (MDF) which creates a solid,
flex-free cabinet which eliminates music altering distortion. The enclosure is
curved and completely sealed.
Mounting Options: The speaker
can be wall mounted using the supplied
plastic wall bracket. The wall bracket is attached to the speaker using the
supplied 9mm bolt. The screws needed to hang the bracket from the wall are not
provided. The center channel also comes supplied with a table top stand that the
speaker rests in allowing you to set the OMD-C1 on top of your TV (if
applicable) or on a shelf.
Speaker Terminals: The OMD-C1
uses high quality gold-plated binding posts located on the rear of the speaker. The terminals will accept a wide range of
connector type including spade lugs, banana plugs or pin type connectors.
Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to
find elsewhere. That's because we have our own in-house Product Research
team. They verify what’s in the box, check the owner's manual, and record
dimensions, features and specs. We stay on top of new products and technologies
to help people make informed choices.