Overview: The Channel Master 3020 antenna
is a 50 element split boom design and receives FM, UHF, and VHF frequencies, both digital and analog. It
can be mounted on a roof, to the chimney, on a wall, or in an attic.
Mounting: The saddle brackets, crossarm
U-bolts are used to mount the antenna to the mast. The outer diameter of the mast
should be between 1-1/4 and 1-1/2 inches.
If using a rotor on the antenna mast, make sure a 95" turning radius around the
antenna is clear of obstruction.
Grounding: The antenna and mast should be
properly grounded. Grounding provides lightning protection for the antenna and
your TV set. Note: No grounding hardware is provided with the antenna.
Connections: The included transformer is
connected to the antenna tap-off points using the included wing nuts. The other
end of the transformer has a female F-type connector. The included waterproof
rubber weather boot should be installed over the cable connection to guard
against corrosion. Note: Coax cable is not provided, RG-6 is recommended.
all distances are approximate, actual performance depends on too many
variables to predict accurately
- UHF Channels (14-69):
- VHF Channels (2-13):
- FM Radio:
The average gain across the frequency band:
- VHF Lo:
- VHF Hi:
Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to
find elsewhere. That's because we have our own in-house Product Research
team. They verify what’s in the box, check the owner's manual, and record
dimensions, features and specs. We stay on top of new products and technologies
to help people make informed choices.