Making connections easier

Posi-Products connectors help make quick, easy, and reliable electrical connections with no crimping, soldering, or messy tape. Their Posi-Tap™ mini tap connectors allow you to tap into hot leads without cutting them. Just insert wire to be tapped into the large cap and hand tighten into the barrel. The conductor point pierces the tapped stranded wire without compromising its conductive integrity. Then, you insert one or more stripped wires through the small cap, and hand tighten for a multiple hookup using only one connector.

KEEP READING

Making connections easier

This package contains 6 mini tap connectors: two designed for 24- to 26-gauge, two for 20- to 22-gauge, and two for 18-gauge wire. Warranty: 60 days.

READ LESS

What's in the box:

Posi-Products™ Wire Connectors owner's manual

6 Posi-Tap connectors (2 each of 3 sizes)

MFR #644-6

Loading reviews...

Average review:

41 reviews

Thanks for submitting your review

Most reviews are processed and published within 5 business days. You will receive a confirmation email once your review has been published.

Filter by rating

filterStar

Customer photos

Customer provided image, click to load a larger version.

Verified customer

Verified employee review

Reviewed on Samsung.com

This review was collected as part of a promotion

Pros:

Cons:

Have questions for

Crutchfield response

Was this helpful?

<< >>

Researched by Crutchfield's Mark G.

Product Research

Features

Overview: This connector kit comes with six Posi-Tap tap connectors, two each of three sizes. Posi-Tap connectors allow you to tap into wires without cutting or stripping them. Each connector has a threaded cap on each end. Just insert wire to be tapped into the Tap end and hand tighten into the barrel. The conductor point pierces the tapped wire without compromising its conductive integrity. Insert the stripped wire through the hole in the Accessory end, then tighten. An internal conductor runs the length of the Posi-Tap, giving you a solid electrical connection. The Posi-Tap connectors are vibration proof, fully insulated, and reusable.

Note: If multiple wires are inserted into the accessory cap, the stripped wire ends should be twisted together.

Dimensions:

Small Posi-Tap Connectors: compatible with 24-26 gauge wire on the Tap end and 18-24 gauge wire on the Accessory end
- Length: 0.76"
- Diameter: 0.2"
- Width of Slot in Tap end: 0.042"
- Diameter of Hole in Accessory end: 0.05"

Medium Posi-Tap Connectors: compatible with 20-22 gauge wire on the Tap end and 18-24 gauge wire on the Accessory end
- Length: 0.875"
- Maximum Diameter: 0.28"
- Width of Slot in Tap end: 0.062"
- Diameter of Hole in Accessory end: 0.05"

Large Posi-Tap Connectors: compatible with 18 gauge wire on the Tap end and 18-24 gauge wire on the Accessory end
- Length: 1.0"
- Diameter: 0.28"
- Width of Slot in Tap end: 0.066"
- Diameter of Hole in Accessory end: 0.15"

Loading accessories...

1 question already asked

What size poly-tap is best for connecting a Axxess ASWC-1 to a car's harness (Mazda in this case)?

rex Feb 17, 2016

2 answers

I don't think it really matters. I ended up using most of them. It really will depend on how tight the area where you're tapping into is.

andrew Feb 22, 2016

Actually this package here includes an assortment of connectors with two designed for 24- to 26-gauge, two for 20- to 22-gauge, and two for 18-gauge wire and it would be your best option to use for installing the Axxess ASWC-1 adapter. While there's no set standard wire gauge for all vehicles, we've found they almost all use wires within 18-24 gauge sizes; so this should do the trick just fine for you. I hope that helps. My Bio: http://www.crutchfield.com/Support/Bio.aspx?bio=159

david Feb 19, 2016 (Staff)

Loading articles...