Why Choose Crutchfield?
Great gear and expert advice
Our experts help you pick the ideal gear for your needs.Meet our advisors
Free tech support for the life of your gear.Read about our one-on-one expert help
You may return items that are complete and like new for any reason within 60 days.See the details of our return policy
Earn one point for every dollar you spend and use those points to save on future purchases.Get full details on Crutchfield Rewards
Deep discounts on car installation gear
Trusted since 1974
Our customers have trusted us with their business, and they’ve helped us win awards for our service.Check out our most recent awards
The manufacturer’s warranty always applies.See more details
This indoor omni-directional antenna from Wi-Ex lets you upgrade the signal strength of your YX510 cellular phone signal booster system. The YX050 improves reception of 800MHz and 1900MHz signals. You can mount it on either a wall or the ceiling, wherever reception is best. Includes an attached nine-inch coaxial cable.
- for use with Wi-Ex zBoost YX510 cell phone signal booster system only
- dual-band 800MHz and 1900MHz indoor antenna
- includes attached 9" coaxial cable
- optional extension cable available through Wi-Ex
- warranty: 1 year
- Our 60-day money-back guarantee
Wi-Ex zBoost YX 050-PCS/CEL Reviews
What's in the box?
- Ceiling mount omni-directional indoor antenna with attached 9" RG-8x coax cable
- Attached plastic nut
- Yellow plastic cap
- Installation Instruction sheet
Overview: The Wi-Ex YX-050-PCS-CEL ceiling mount indoor, omni-directional antenna provides enhanced performance for the Wi-EX zBoost cell phone-PCS signal boosters and is compatible with YX500series and YX600 ProPack series.
Compatibility: The antenna will work with the following zBoost PCS-CEL-Dual Band signal boosters (673YX510 or 673YX545).
Placement: The YX050-PCS-CEL antenna provides enhanced signal strength in all directions (omi-directional) from the antenna. The antenna should be located near the center of the area where improved signal strength is desired.
Mounting: The antenna is mounted to a ceiling by drilling out a 3/4" diameter hole in the ceiling where the antenna is to be mounted. The antenna is then placed flush against the ceiling and the attached cable and threaded mount routed through the hole. The installed plastic nut must be removed first before routing the threaded mount through the hole. Once the cable and threaded mount are through the hole the plastic nut is screwed back on to tighten and secure the antenna into place.
Connection: The antenna may be connected directly to the Base Unit using the attached 9'' RG-8x coax cable or located near the Base unit using an optional RG-8x coax extension cable.