Skip Navigation

A heritage of transparent, high-accuracy sound continues

THIEL's long tradition of speaker designs that reproduce recorded sound as accurately as possible proudly continues with the stunning CS2.7. This three-way floor-standing tower's slender design, beautifully hand-crafted cabinet, and sonic performance make it a great choice for audiophile music systems and high-end home theaters alike.

A high-tech tweeter/midrange combo

The secret to the CS2.7's incredibly lifelike sound starts with its state-of-the-art coaxial driver. Inspired by THIEL's flagship CS3.7 tower, this driver array houses an anodized aluminum tweeter mounted inside a uniquely ribbed aluminum midrange cone. This ingenious design maintains the proper time alignment for the high and midrange frequencies, creating unparalleled accuracy and realism. Plus, this driver's large-diameter voice coil further braces the midrange against out-of-phase bending common in virtually all other loudspeaker drivers.

"THIEL has a long track record of producing some of the best speakers around, but this time it has taken a major step forward…the CS2.7 is one of the most neutral, detailed, and transparent speakers I've heard…. One hell of a speaker—and one your wife or partner is likely to be happy to live with."

— From Anthony H. Cordesman's review in The Absolute Sound, April, 2013

Richly detailed, musical bass

Bass comes courtesy of an aluminum woofer and passive radiator. A motor structure consisting of a short voice coil sitting inside a large magnet effortlessly drives the woofer. Unlike the voice coils found in most speakers that extend outside the magnet, the deliberately short voice coil always "sees" the optimum magnetic field as it travels back and forth. This eliminates distortion caused by variances in magnetic strength. The passive radiator increases the speaker's output. It all adds up to accurate, musical bass that perfectly complements the treble without being "boomy" or overbearing.

State-of-the-art crossover

The "unsung hero" of any speaker is the crossover —  it directs the right frequencies to the right drivers so you don't have a tweeter trying to reproduce bass and a woofer trying to reproduce highs. THIEL meticulously engineered their first-order crossover to achieve tonal neutrality. The advanced crossover ensures that musical information such as amplitude, phase, and time remain faithful to the original signal. And THIEL uses only top-notch components that don't mask fine detail. Their high-quality capacitors and pure copper air-core inductors are among the best in the industry.

A finely crafted cabinet

Low-level cabinet vibrations can diminish the purity of sound when you're playing music and movies. The new CS2.7 replaces the one-inch-thick MDF cabinet walls of previous CS2 series models with much more robust curved plywood. The increase in rigidity prevents the enclosure from vibrating in sympathy with the movement of the drivers, preserving even the most minute details. The front of the enclosure slopes back, placing the voice coils of all three drivers on the same plane. This allows all frequencies to reach your ears at the same time for the most complete and accurate sound reproduction. The cabinet exterior is then laminated in your choice of fine hardwood veneer, creating a luxurious and attractive loudspeaker with a furniture grade finish.

Product Highlights:

  • phase-correct 6dB per octave crossover
  • ultra-rigid, curved, premium-quality plywood cabinet resists vibration to preserve critical detail during playback
  • furniture-grade hardwood veneer finish
  • coaxially mounted aluminum dome tweeter and ribbed aluminum midrange driver unit delivers precise time alignment for high-accuracy sound
  • large neodymium ring magnet drives the midrange cone
  • five neodymium magnets drive the tweeter
  • 8" aluminum cone woofer with cast aluminum chassis
  • passive radiator design for extended bass response
  • short coil/long gap driver design eliminates distortion caused by variances in magnetic strength
  • recommended power: 100-400 watts
  • 4-ohm impedance - suited for high-current amplifiers
  • frequency response 35-20,000 Hz (±2.5dB)
  • sensitivity: 87 dB
  • 11"W x 41"H x 16-3/4"D
  • weight: 77 lbs.
  • warranty: 10 years
  • Our 60-day money-back guarantee

Floor-standing speakers — still standing tall

Sure, floor-standing tower speakers buck the industry trend toward smaller, visually inconspicuous speakers, but they're hard to beat if great sound is your primary goal. Tower speakers produce powerful sound with excellent bass, making them a great choice for serious music lovers and for folks who want high-impact home theater.

THIEL CS2.7 Reviews

Average Customer Review:

1 Review

Thiel CS2.7

Written by: Eric from Bucks County, PA on April 14, 2014

Crutchfield Customer Review (What's this?)

the speakers are great! Dealing with Thiel, not so much. It was a less than wonderful experience in getting information from Thiel about the shipping date for the speakers. Then when they arrived, one was cosmetically damaged and the grill was bent. Crutchfield was wonderful in helping me deal with this! Not sure I would again make such a major purchase without eyeballing the actual item I would be taking home. Back and forth with Thiel about the cosmetic damage (pictures etc.) did not make me feel like a valued customer.

Pros: Sound is great and improving as they break in.

Cons: Thiel was less than great about shipping date and resolving cosmetic damage issues.

Preliminary info from the manufacturer

Features and Specs

Enclosure Passive Radiator
Finish Wood veneer
Color Natural Cherry
Tweeter Dome
Tweeter Size (inches) ---
Midrange Size (inches) ---
Woofer Size (inches) 8
Woofer Composition Aluminum
Woofer Surround ---
Built-in Powered Sub No
Video-Shielded ---
Connector Type 5-way post
Bi-amp Inputs No
Parts Warranty 10 Years
Labor Warranty 10 Years
Power Range 0
Frequency Response 0 Hz
Sensitivity 0 dB
Impedance (Ohms) ---
Amplifier Power ---
Height (inches) 0
Width (inches) 0
Depth (inches) 0
Weight 0 lbs

Customer Q&A

1 question already asked

Thanks Matt. We'll get the specs updated once we have the info. In the meantime you can always reach out to an Advisor about any questions you may have. [ Jeff  Jan 27, 2014 ]  Staff