Chat
Contact us
Close contact box
Connect ID #
288 620 897 4
Connect ID #
288 620 897 4
Don't wait on hold. We'll call you back when it's your turn to talk with the next available .
Please enter your name  
Please enter your phone number  
Please enter a message  

Calls may be recorded for training and quality control purposes.

We are located in Virginia USA.

Thank you. We will be calling you .
We're sorry. We have encountered a problem.

Kenwood 1000-watt Dual 12" Bass Package Package includes KAC-9106D amp, two 12" subs, and Sound Ordnance enclosure

Item # 700309106S

This Kenwood bass package includes a 1000-watt mono amplifier, two 12" subwoofers, and a ported dual 12"...

This Kenwood bass package includes a 1000-watt mono amplifier, two 12" subwoofers, and a ported dual 12"...

5 questions - 8 answers

Item # 700309106S

Shop all Bass Packages

About the Kenwood 1000-watt Dual 12" Bass Package

Bob Bihlmayer

Add some bass to your ride

This Kenwood bass package includes a 1000-watt mono amplifier, two 12" subwoofers, and a ported dual 12" enclosure. Just add some wiring for a complete sub system that'll bring the thrill of powerful bass to your vehicle.

Add some bass to your ride

This Kenwood bass package includes a 1000-watt mono amplifier, two 12" subwoofers, and a ported dual 12" enclosure. Just add some wiring for a complete sub system that'll bring the thrill of powerful bass to your vehicle.

KAC-9106D mono sub amp

Kenwood's KAC-9106D mono amp punches out up to 1000 watts RMS to the two 12" subwoofers. Built-in low-pass and subsonic filters let you adjust the output so you'll get the best sound possible from these subs in the Sound Ordnance enclosure. And you can dial in up to 18 dB of bass boost if you want to fatten up the thump.

Two KFC-W3013PS 12" subwoofers

Each 4-ohm KFC-W3013PS Performance Series 12" sub handles up to 400 watts RMS, so two of them will work well with the KAC-9106D amplifier. The sub's diamond-array patterned cone resists flexing, for strong and clean bass notes. A tough rubber surround accommodates the extra-long cone excursion that pumps up the volume. And a dual vent cooling system makes sure the sub keeps running, even during long, loud jams.

Sound Ordnance dual 12" vented enclosure

Sound Ordnance's rugged Bass Bunker BB122-125V vented enclosure holds two 12" subwoofers, offering an internal volume of 1.36 cubic feet per chamber. This unloaded enclosure features high-grade, medium-density fiberboard construction, with sealed inner braces that help combat resonance by reducing vibrations.

READ LESS

Product highlights:

  • package includes KAC-9106D amp, two KFC-W3013PS 12" subs, and Sound Ordnance vented dual 12" enclosure
KAC-9106D mono subwoofer amplifier
  • 500 watts RMS x 1 at 4 ohms (1000 watts x 1 at 2 ohms)
  • variable low-pass filter (50-200 Hz, 24 dB/octave)
  • subsonic filter (20-50 Hz, 18 dB/octave)
  • variable bass boost (0-18 dB at 40 Hz)
  • preamp inputs and outputs
  • fuse rating: 40A x 3
  • 4-gauge power and ground leads recommended — wiring and hardware not included with amplifier
  • 13-3/16"W x 2-1/4"H x 7-5/8"D
  • warranty: 1 year
KFC-W3013PS 12" 4-ohm subwoofers (pair)
  • diamond-array polypropylene woofer cone with rubber surround
  • power range: 50-400 watts RMS
  • frequency response: 34-300 Hz
  • sensitivity: 85 dB
  • warranty: 1 year
BB122-125V vented enclosure
  • hatchback style enclosure for two 12" subwoofers
  • 5/8" MDF (medium-density fiberboard) with black carpet covering
  • dimensions: 32-3/4"W x 14-3/8"H x 14-3/8"D1 x 11-1/4"D2
  • warranty: 1 year
  • MFR # Kenwood Bass Package

What's in the box:

  • This subwoofer package contains four individually packaged items: a Kenwood KAC-9106D amplifier/ two Kenwood KFC-W3013PS subwoofers/ and a Sound Ordnance BB122-175V dual 12" subwoofer enclosure
  • The KAC-9106D Box includes:
  • Mono subwoofer amplifier
  • Three 40 amp ATO fuses (installed)
  • 2 Terminal covers (installed)
  • 7" Speaker-level input harness
  • 2.5mm Allen wrench
  • Four 5/8" Self-tapping screws
  • Instruction manual (English/ French/ Spanish)
  • Warranty information
  • Each KFC-W3013PS Box includes:
  • One 12" Single 4-ohm voice coil woofer
  • Plastic trim ring
  • Eight 1-1/4" Self-tapping screws
  • Adhesive backed foam gasket
  • Cardboard template
  • Instruction manual (English/ French/ Spanish/ Portuguese)
  • Warranty information
  • The BB122-175V Box includes:
  • Hatchback-style enclosure for two 12" subwoofers

Customer reviews for Kenwood 1000-watt Dual 12" Bass Package

Loading reviews...

Average review:

3.5 out of 5 stars
2 reviews

Thanks for submitting your review

Filter by rating

Customer photos

Customer provided image, click to load a larger version.
Customer provided image, click to load a larger version.

Sort reviews

Sort by:
Items per page:
View page:

Verified customer (What's this?)
Verified employee review (What's this?)

Reviewed on Samsung.com

This review was collected as part of a promotion

Pros:

Cons:

Crutchfield response
Customer provided image, click to load a larger version.
<< >>

More details on the Kenwood 1000-watt Dual 12" Bass Package

Pat M.

Product Research

KAC-9106D Amplifier
KFC-W3013PS Subwoofers
BB122-175V Enclosure

KAC-9106D Amplifier

CEA-2006 Compliant: CEA-2006 is a system of testing and measurement for mobile audio amplifiers. This voluntary standard advocates a uniform method for measuring an amplifier's RMS power output and signal-to-noise ratio. The criteria for measuring power uses a DC input voltage of 14.4 volts and the RMS power output is measured into a 4Ω load, with 1% or less Total Harmonic Distortion plus noise (THD+N), and over a frequency range of 20 Hz to 20 kHz (for full range amplifiers). Signal-to-Noise ratio is measured in weighted absolute decibels (dBA) at a reference of 1 watt into 4Ω. CEA-2006 standards allow consumers to compare car amplifiers and receivers under the same conditions (apples to apples). Using CEA-2006 criteria, the Kenwood KAC-9106D is rated at 500 watts RMS x 1 channel with a 76 dBA signal to noise ratio. The signal to noise ratio at the rated power output (not CEA-2006 conditions) is 100 dB.

2-Ohm Stable: The amplifier can also support a 2-ohm load; the 2-ohm power output is 1,000 watts RMS x 1 channel.

Cast Aluminum Heat Sink: The KAC-9106D utilizes a cast aluminum heat sink design to ensure the amplifier stays cool.

Protection circuitry: The amplifier features protection circuits that will turn the amp off in case of the following events:

  • speaker wire short-circuits
  • speaker output contacts ground
  • unit malfunctions and DC is sent to speaker output
  • the amp overheats

Power Indicator: When the amplifier is turned on the Power indicator (on top of the amp) lights up. This indicator turns off with the amplifier, and will turn off if the amplifier goes into protect mode.

Auto Turn-on: When using a speaker level input, the amp will turn on automatically when it senses the input signal.

Gain: To accommodate the varying range of signal levels from today's factory and aftermarket radios, the KAC-9106D features an adjustable gain control; 0.2-5.0 volts line level (RCA) and 4.0-12.0 volts speaker level.

Crossover: The built-in 24 dB/octave low-pass filter has a continuously variable crossover point; 50Hz to 200Hz. Because this is a subwoofer amp, the crossover is always engaged.

Infrasonic Filter: The 24 dB/octave Infrasonic Filter removes ultra-low frequencies that cannot be reproduced by most subwoofers. These frequencies do not become sound, but unnecessary oscillations which affect sound by causing distortion. These frequencies also waste amplifier power and can cause damage to speakers. The filter's crossover point is continuously variable from 20 Hz to 50 Hz.

Bass Boost: The bass boost is adjustable from 0-18dB at 40Hz.

Power Connections: The power and ground connections are 0.55" wide screw terminals. The remote turn-on screw terminal is 0.335" wide. A Phillips-head or flat blade screw driver (not supplied) is required to tighten/loosen the terminals. Spade connectors are recommended. The manual lists a minimum of 10 gauge wire for power and ground, but given the 120 amp fuse value and the current consumption specification of 65 amps, we recommend a 4 gauge wiring kit.

Speaker Outputs: There are two pair of 0.335" wide screw terminal speaker outputs; they are internally wired in parallel, making it easy to connect the two subwoofers. A Phillips-head or flat blade screw driver (not supplied) is required to tighten/loosen the terminals. Spade connectors are also recommended for the speaker wires.

Line Level Input: The line input is a pair of stereo RCA jacks.

Line Level Output: The amplifier has a pair of RCA line level outputs for feeding another amplifier; it is the same signal that is input through the RCA line inputs. The amplifier's crossover has no effect on the line level output signal.

Speaker Level Input: A wiring harness is included for the speaker level input.

Fuses: The amplifier uses three 40-amp ATO blade-type fuses.

Dimensions:

  • Width: 13.1875"
  • Height: 2.25"
  • Depth: 7.575"
KFC-W3013PS Subwoofers

Cone: The KFC-W3013PS uses a polypropylene cone and rubber surround for added durability.

Heat Transfer System: A dual ventilation system design helps keep the motor structure cool, improving power handling and longevity.

Long Stroke Design: The pole piece has been extended to provide a more linear magnetic field for woofer operation. This lowers distortion and provides the woofer with better low frequency response.

Double Stacked Magnet: The stacked magnet assembly is used to create a powerful linear motor with increased excursion capability for superior bass output.

Spring Terminals: The spring post terminals on one side of the woofer connect to your amplifier's wiring. The posts will accept pin connectors, single banana plugs, or bare wire up to 10 gauge.

BB122-175V Enclosure

Materials: The Sound Ordnance BB122-175V Bass Bunker is an unloaded, hatchback-style ported enclosure for two 12" subwoofers. It is constructed of 5/8" MDF (medium-density fiberboard), covered in black carpet.

Internal Box Volume: The enclosure has two separate chambers, each with 1.615 cubic feet of airspace.

Terminals: The BB122-175V is equipped with two pair of spring-post speaker terminals, one for each chamber, mounted in the rear panel. The spring terminals will accept bare wire up to 10 gauge, pin connectors, and single banana plugs, but are spaced too far apart for dual banana plugs. Inside the enclosure, each set of terminals has an attached 24" length of speaker wire for connecting the subwoofer.

Brackets: Brackets for securing the enclosure to your vehicle are recommended.

Dimensions:

  • Width: 32.75"
  • Height: 15.125"
  • Depth1: 15.875" (at the base)
  • Depth2: 12.875" (at the top)

Loading accessories...

Customer Q&A

5 questions already asked

Q
I want to know how much bass this will push out? How big the magnet in it is? I currently have 2 12 inch XXX subwoofer with a 1200 watt amp. I wanted to upgrade and I know kenwood is a good subwoofer. I wanted something with a lot more kick. Something that people will hear when I'm coming down the street. If this isn't that system I would like to know which one of your subwoofers would give me that.
brieann  Jan 13, 2015
4 answers
A
i just installed this yesterday and it has massive amounts of bass guaranteed to be heard coming down the street.
nathan t  Jan 19, 2015
A
You will definitely upset your neighbors off with this system :) I put this package in my Gensis coupe and it absolutely rocks ... I would definitely recommend this package
robert e  Jan 14, 2015
A
This subwoofer package is excellent as far as price and performance is concerned. I will add though that if you do not have a high performance alternator, you should think about buying a 3.0 farad capacitor to help with the dimming of headlights when the bass is really kicking. A ported box is more ideal for rap and hip hop, and non ported enclosures are more suited for rock , more punchy and responsive bass than the ported box. I currently have both in a single double ported box and a 3 farad cap and have had absolutely no issues with the package since I installed it. Very loud once you break the subs in and get the spiders flexible. Well worth the buy. Hope I could help with your question. Oh, and yes... People will hear you coming LOL
daniel j  Jan 14, 2015
A
I wouldent say they are something crazy that u can hear from a block away but they do have a lot of bass. If I were you I would spend some extra money buy kicker dual 15s ported enclosure and run 1500-2000 watt amp you would hear that way down the road. But like anything you get what you pay for be prepaired to spend
tim  Jan 14, 2015
Q
Does this package include all necessary wiring?
mike  Dec 10, 2014
1 answer
A
For details on fit or installation please contact an Advisor by phone (1-800-324-9695) or online chat. They will be able to pull up your vehicle and give you the details on if this will fit and what you will need for an installation in your vehicle.
kristina  Dec 11, 2014 (Staff)
Q
Will this system fit in the back of my 2001 Dodge Stratus?
dalton  Nov 06, 2014
1 answer
A
For details on fit or installation please contact an Advisor by phone (1-800-324-9695) or online chat. They will be able to pull up your vehicle and give you the details on if this will fit and what you will need for an installation in your vehicle.
kristina  Nov 07, 2014 (Staff)
Q
Will this system fit into the trunk of my 01 camaro t top? There is also a space in the trunk that is lower which is my ideal spot to put a system.
devin  Jul 31, 2014
1 answer
A
We have not received any answers from other customers on your question. I would recommend reaching out to an Advisor by phone (1-800-324-9695) or online chat. They should be able to help answer your question.
kristina  Aug 04, 2014 (Staff)
Q
will this be good for a 2012 honda accord ?
juan  May 04, 2014
1 answer
A
I forwarded your question to an Advisor and they responded with the following: The Kenwood 1000-watt Dual 12" Bass Package is an excellent system and should fit in the trunk of your Accord without issue! If you would like to discuss further you can contact an Advisor directly by phone (1-800-324-9695) or online chat.
kristina  May 05, 2014 (Staff)
SHOW MORESHOW LESS

Loading articles...

Compare the sound