About the Boyo VTC424R
The simpler way to back up
Boyo's VTC424R wireless rear-view camera system is an ideal back-up solution for larger vehicles. You'll gain a respectable view of what's behind you without the hassle of a major wired installation. Boyo uses a universal, practical design so that your new equipment isn't so noticeable. The camera itself is in a bar-style, weather-proof housing that you screw on over your license plate, and the included 4.3" monitor mounts in a convenient spot on your dash or windshield.
Easier installation
Installing a back-up camera system can be a hassle — running a wired video signal through your vehicle's interior and into the dash poses unique challenges. But Boyo takes some of the headache out of the process with this wireless solution. Mount your camera on your license plate and wire it for power, then connect power and ground to the monitor as well. Once they're wirelessly paired, you're ready for reverse.
What a camera
Boyo's wireless zinc metal camera sports an IP67 waterproof rating for life in the elements. A 130º wide-angle view will provide an expansive picture when you're in reverse, and the camera's 0.02 Lux illumination rating means you'll still get a clear picture from dusk until dawn.
Note: You'll have to wire power and ground connections to the monitor and camera. Boyo does not recommend the VTC424R wireless system for RVs or towing.
Product highlights:
- wireless system with bar-type license plate back-up camera and 4.3" monitor
- transmission distance up to 67'
- resistant to 2.4GHz wireless signal or other RF signals
Camera Specifications:
- CMOS image sensor with color video output
- 130° horizontal viewing angles
- zinc metal weather-proof camera housing designed to screw onto license plate
- parking lines and reverse image selectable at installation
- 20-30 frames per second
- illumination: 0.02 Lux
- wired DC 12V/24V power required
Monitor Specifications:
- resolution: 480 x 272
- 4.3" color TFT monitor
- adjustable fittings for dash or windshield mounting
- adjustable contrast and brightness
- wired DC 12V/24V power required (vehicle power point and hard wire options)
- warranty: 1 year
- MFR # VTC424R
What's in the box:
- Wireless LCD monitor
- Wireless bar-type rearview camera
- Antenna (pre-installed on monitor)
- Sun-shade (pre-installed on monitor)
- Self-adhesive mount (pre-installed on monitor)
- Suction-cup mount
- Two 9.5' power/ground harnesses
- 12-Volt/cigarette lighter power adapter (w/ attached 8' cable)
- 2 Hex-head screws
- Large hex-head key
- Small hex-head key
- User's Manual
- "Options of More Stable Signaling Channel Receiving" note
- Warranty Card
- Product Registration Card
Customer reviews for Boyo VTC424R
Loading...
Loading reviews...
Average review:
3.0 out of 5 starsThanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Boyo VTC424R
Features & specs
Features and Specs | ||
---|---|---|
Camera Type | Rear | |
Resolution | 345,600 | |
Parking Guidelines | Yes | |
Lux Rating | 0.02 lux (min) | |
Selectable Views | N | |
Reversed Image | Mirror | |
Horizontal Viewing Angle | 130 deg | |
Vertical Viewing Angle | 0 | |
Wireless | No | |
Plug type | N/A |
Product Research
Features
Wireless Backup Camera System: The BOYO Vision VTC424R Wireless Backup Camera System features an external LCD monitor with a built-in WiFi (2.4GHz) wireless receiver and a bar-type rear view camera with a built-in WiFi wireless transmitter. The wireless camera at the back of your vehicle will send its video signal to the wireless monitor in the front of the vehicle which turns on automatically. Images at the back of your vehicle will then be shown clearly on the monitor's screen. The wireless rear view camera system has a wireless range up to 65'. When your vehicle's reverse gear is engaged, the VTC424R system works automatically.
LCD Monitor: The VTC424R's wireless LCD monitor features a 4.3" color display (480 x 272) with adjustable brightness, color, and contrast controls. The 4.3" LCD monitor is equipped with a built-in wireless WiFi (2.4GHz) receiver & external antenna which allows it to receive a wireless video signal from the included wireless backup camera. A removable sun-shade snaps over the LCD monitor to prevent glaring for better visibility. The LCD monitor can swivel left or right, and angle up or down.
Bar-Type Camera: The VTC424R's wireless backup camera features a highly sensitive CMOS with approximately 345,600 effective pixels (720 horizontal x 480 vertical) for true color reproduction and clear picture quality. The camera features a wide-angle lens with a 130° viewing angle providing an excellent field of vision behind you in your vehicle and can be angled down. The backup camera is housed in a bar-type bracket that is made from zinc alloy and covered in a black matte finish with a scratch-resistant coating. The camera housing is also waterproof (IP67). The camera features a built-in WiFi (2.4GHz) wireless transmitter which transmits the camera's video signal to the supplied wireless mirror-monitor mounted inside the vehicle.
Parking Guidelines: The VTC424R provides parking guidelines on the LCD monitor to assist you when backing up into a parking space. There are two vertical lines which help you judge the left and right edges of the parking space and your vehicle. There are also three color-coded (green/yellow/red) horizontal lines that are used to distinguish how close you are getting to the end of the parking spot.
Mounting Options: The wireless LCD monitor offers two mounting options. There is a self-adhesive bracket which allows you to mount the monitor to your dashboard. There is also a suction-cup mount which allows you to mount the monitor to your windshield. The wireless bar-type backup camera attaches to your vehicle's existing license plate frame with the supplied hardware.
Wiring: The wireless LCD monitor can be powered by the supplied 12-volt/cigarette-lighter power adapter or hardwired to the vehicle's reverse light wire using the supplied wiring harness. The camera needs to be connected to the vehicle's reverse lights which causes the camera to come on only when the vehicle is in reverse gear. By connecting to your vehicle's reverse light wiring, the VTC424R system works automatically when you place your vehicle into reverse gear.
Loading...
Loading accessories...
Customer Q&A
3 questions already asked
Loading...
Loading articles...