Overview: The Klipsch LightSpeaker (L 5.2.0) is an add-on
wireless speaker for the Klipsch LightSpeaker System (714LS522,
sold separately). The wireless LightSpeaker is intended to install into a 5" or 6"
recessed ceiling light fixture, common in most homes and will replace a standard
light bulb (R-30 or R-40).
LightSpeaker: The LightSpeaker simply installs into almost any 5"
(R-30) or 6" (R-40) recessed ceiling light fixture and serves two system
purposes - it act as a wireless, self-powered loudspeaker and a dimmable LED
- Full-Range Sound Performance: The LightSpeaker's
full-range internal speaker uses a 20 watt high-performance, low-distortion
digital amplifier to deliver energy efficient sound. Furthermore, the
2.5-inch wide dispersion driver uses digital signal processing to optimize
high- and low-frequency output for a full spectrum of sound.
- Brilliant LED Light: The LightSpeaker comes with a fully dimmable
LED bulb that is rated for 25,000 to 40,000 hours of use and can last over
15 years (long lifespan saves changing 50 standard bulbs). It also reduces
daily lighting expenses by 80%, using 10 watts to produce light that's
bright enough to replace up to a 65-watt bulb. The LED light is fully
dimmable using the included remote and transmitter. Unlike incandescent
bulbs, LED light bulbs contain no mercury or halogen gases and produce
almost no heat.
Earth Friendly: The LightSpeaker
can pay for itself in 5 years through savings on installation, equipment,
and daily usage of the LED green lighting.
No Wiring/Easy Install: The LightSpeaker installs like a light bulb
and fits almost any fixture with a standard Edison socket; such as 5- and 6-inch
recessed can-lighting, hanging lights, as well as table and floor lamps. The
LightSpeaker is equipped with a unique mounting system (SimpleTabs). The three
SimpleTabs, on the back of the speaker can be rotated outward and when the
LightSpeaker is pressed into the housing, hold it centered and securely in
place. There is no wiring, no retrofitting, and no software. Plus, uninstalling
the LightSpeaker is just as simple, in case you move.
Mounting Requirements: The Klipsch LightSpeaker requires a light
fixture with an Edison socket and an opening of 4.75" in diameter with 6.5625"
||Recommend Max Speaker Spacing
|14' & higher
- Without Bezel: 5.125" (diameter) x 7.125" (depth)
- With 5" Bezel: 6.75" (diameter) x 7.125" (depth)
- With 6" Bezel: 7.5625" (diameter) x 7.125" (depth)
Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere.
That's because we have our own in-house Product Research team — they open the box,
verify contents, check the owner's manual, and record dimensions, features and specs.
We stay on top of new products and technologies to help people make informed choices.