Klipsch® designed the R-2502-W as an unobtrusive in-wall speaker specifically for premium sound quality. They're ideal for home theater and music listening environments alike. Install a speaker on either side of your TV and use one below or above your TV as a center channel. Or use a pair as your "go-to" stereo speakers to enjoy your favorite tunes in any room where conventional speakers are hard to fit or inconvenient.

The R-2502-W pairs a 1" silk-dome tweeter with two 5-1/4" drivers. The tweeter is set within a conical horn for accurate in-room frequency response with high efficiency and low distortion. And the dual woofers offer full, impressive bass response.

An optional in-wall bracket is recommended for installing the R-2502-W in new construction.

Free installation guides from Crutchfield
When you buy in-wall or in-ceiling speakers from Crutchfield, you'll also receive copies of our in-depth speaker and wire installation guides, free of charge.

Got wire?
Most speakers don't include any. Learn more about in-wall wiring at the Crutchfield Learning Center.
Shop our selection of in-wall speaker wire.

Product Highlights:

  • 1" silk-dome tweeter
  • dual 5-1/4" woofers
  • frequency response 47-20,000 Hz (±3dB)
  • handles 60-110 watts RMS
  • sensitivity 91 dB
  • 8-ohm impedance
  • paintable grille
  • IR receiver knockout holes allow for infrared repeaters
  • cutout: 6-1/2"W x 16-7/16"H
  • mounting depth: 3-1/4"
  • limited lifetime warranty
Priced each

    Hands-on research

    What's in the box?

    Download owner's manual

    • Rectangular in-wall speaker
    • White metal mesh grille
    • Plastic paint mask
    • Cardboard template
    • Owner's Manual (Eng/Fren/Span/+ 5 other languages)

    Features and Specs

    Enclosure Type In-wall
    Video Shielded No
    Tweeter Horn-loaded dome
    Midrange Size N/A
    Woofer Size 5.25
    Woofer Composition Polypropylene
    Woofer Surround Rubber
    Power Range (Watts) 60-110
    Sensitivity 91 dB
    Impedance (Ohms) 8
    Frequency Response 47-20kHz
    Connector Type Spring post
    Bi-Amp Inputs No
    Parts Warranty Ltd. Lifetime
    Labor Warranty Ltd. Lifetime

    Product Research

    Features
    Mounting Options

    Features

    Two-Way Design: The Klipsch R-2502-W in-wall speaker employs dual 5.25" polypropylene woofer cones for accurate sound with dynamic detail, while a silk dome tweeter mated to a symmetrical pattern 90 x 90 conical horn generates flat in-room frequency response with high efficiency and low distortion. The speaker's precision voiced crossover networks further ensure that the high and low frequencies are faithfully reproduced.

    Basket/Frame: The R-2502-W has a sturdy ABS basket and frame. The frame can be painted to match any decor (a clear paint mask is supplied to protect the drivers from overspray). The aluminum mesh grille is also paintable.

    Spring-Post Terminals: The Klipsch R-2502-W in-wall speaker features two spring-post terminals which will accept bare speaker wire, pin-connectors, or banana plugs (single/dual). The spring-post speaker terminals are color-coded (red/black) for easy identification between positive and negative.

    Power Specifications Note: The manufacturer has specified the maximum power handling of this speaker as 60 watts RMS (240 W Peak). Klipsch has also published a recommended amplifier power specification as 110 watts. For the purpose of matching the speaker with the best amplifier, Crutchfield is listing the power specification as 110 watts.

    Mounting Options

    Installation: The speaker can be installed in new or existing construction. It can be mounted vertically or horizontally. It requires a cutout of 6.5" (w) x 16.4375" (h), with a mounting depth of 3.25". For new construction, purchase of the IK-502-W installation kit (714IK502W) is highly recommended. For existing construction, the speaker should be installed in drywall at least 3/8" thick. A cardboard template is included to assist you in making the cutout.

    IR Knockout: A 1/2" diameter knockout panel is provided in the lower left hand corner of the speaker frame for installing an IR sensor.

    Our Product Research Team

    At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team — they open the box, verify contents, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.

    Be the first to review this product
    Great Gear Giveaway

    Submit a review and then enter to win a $500 rewards card

    Review this product:

    Thanks for taking the time to share your experiences about this product. Please be sure to focus your comments on the product itself. Read our Review Guidelines for more information.

    Your email won't be visible. Please use the email address that is associated with your order.
    (e.g., JohnD) Your review will be signed using the display name and location
    (e.g., Charlottesville, VA)

    Click on a star to rate the overall product on a scale of 1-5
    1500 characters left
      Attach a YouTube Review
    Crutchfield Video Review Guidelines
    • Only submit videos that you made or are authorized to use.
    • Do not submit videos that contain music, video or visuals that are copyrighted and belong to someone else.
    • Please see our Review Guidelines for more information.
    500 characters left
    500 characters left

    Get everything you’ll need to enjoy your new Klipsch R-2502-W

    Set the volume level in your remote location without going back and forth from room to room.
    UL-listed speaker wire is designed to be run through walls and is building code compliant.
    Have your speakers installed by qualified professionals.
    Use wall plates to get the speaker wire into your wall so you can run it to the speakers.
    Install these before your drywall goes up to mark your speaker locations for your builder, so you won't need to cut holes later.
    A speaker selector lets you control which speakers are playing, and lets you safely drive multiple pairs with one receiver.
    Niles SVC100K

    Niles SVC100K

    Sliding stereo volume control with impedance magnification

    Item #: 190SVC100K

    $129.99
    Add to Cart
    Russound ALTX-WIRI-2D

    Russound ALTX-WIRI-2D

    Electronic volume control with IR sensor and impedance magnification

    Item #: 543ALTXW2D

    $159.00
    Add to Cart
    Niles VCS100K

    Niles VCS100K

    Stereo volume control with impedance magnification

    Item #: 190VCS100K

    (5)

    $99.99
    Add to Cart
    AudioQuest FLX-16/2 16-Gauge 2-Conductor In-Wall Speaker Cable

    AudioQuest FLX-16/2 16-Gauge 2-Conductor In-Wall Speaker Cable

    UL-approved for in-wall use; direct-burial rated (125 feet)

    Item #: 703162125

    (28)

    $99.99
    Add to Cart
    AudioQuest FLX-16/4 16-Gauge 4-Conductor In-Wall Speaker Cable

    AudioQuest FLX-16/4 16-Gauge 4-Conductor In-Wall Speaker Cable

    UL-approved for in-wall use; direct-burial rated (125 feet)

    Item #: 703164125

    (7)

    $159.99
    Add to Cart
    AudioQuest FLX-14/2 14-Gauge 2-Conductor In-Wall Speaker Cable

    AudioQuest FLX-14/2 14-Gauge 2-Conductor In-Wall Speaker Cable

    UL-approved for in-wall use; direct-burial rated (125 feet)

    Item #: 703142125

    (52)

    $129.99
    Add to Cart
    AudioQuest FLX-14/4 14-Gauge 4-Conductor In-Wall Speaker Cable

    AudioQuest FLX-14/4 14-Gauge 4-Conductor In-Wall Speaker Cable

    UL-approved for in-wall use; direct-burial rated (125 feet)

    Item #: 703144125

    (2)

    $219.99
    Add to Cart
    Russound HTP2

    Russound HTP2

    "7.2" home theater connection wall plate

    Item #: 543HTP2

    (4)

    $69.00
    Add to Cart
    Klipsch IK-502-W (each)

    Klipsch IK-502-W (each)

    In-wall rough-in bracket

    Item #: 714IK502W

    (1)

    $29.99
    Add to Cart
    Niles SS-4

    Niles SS-4

    4-pair speaker selector

    Item #: 190SS4

    (23)

    $129.99
    Add to Cart
    Niles SS-6

    Niles SS-6

    6-pair speaker selector

    Item #: 190SS6

    (8)

    $174.99
    Add to Cart
    Russound SS-4.2

    Russound SS-4.2

    4-pair speaker selector

    Item #: 543SS42

    (6)

    $119.00
    Add to Cart
    Russound SS-6.2

    Russound SS-6.2

    6-pair speaker selector

    Item #: 543SS62

    (1)

    $159.00
    Add to Cart
    Niles SSVC-2

    Niles SSVC-2

    2-pair speaker selector with volume control

    Item #: 190SSVC2

    (4)

    $249.99
    Add to Cart
    Niles SSVC-4

    Niles SSVC-4

    4-pair speaker selector with volume control

    Item #: 190SSVC4

    (7)

    $399.99
    Add to Cart
    Niles SSVC-6

    Niles SSVC-6

    6-pair speaker selector with volume control

    Item #: 190SSVC6

    (6)

    $474.99
    Add to Cart
    Russound SDB-2.1

    Russound SDB-2.1

    2-pair speaker and source selector with volume control

    Item #: 543SDB21

    (1)

    $199.00
    Add to Cart
    Russound SDB-4.1

    Russound SDB-4.1

    High-power 4-pair speaker selector with volume control

    Item #: 543SDB4VC

    (1)

    $399.99
    Add to Cart
    Russound SDB-6.1

    Russound SDB-6.1

    High-power 6-pair speaker selector with volume control

    Item #: 543SDB6VC

    $499.99
    Add to Cart
    Niles VCS HUB8

    Niles VCS HUB8

    8-speaker pair connecting block

    Item #: 190VCSHUB8

    (6)

    $79.99
    Add to Cart