About the Klipsch R-2502-W II
Enjoy great sound throughout your home with Klipsch® R-2502-W II wall-mount speakers. Their high-tech design and solid construction deliver ear-pleasing results for movies or music. Use them as surround sound speakers in an all-Klipsch home theater, or install them in pairs for stereo listening with your multi-room audio system. Either way, you'll experience accurate Klipsch sound without the clutter of conventional speakers.
The R-2502-W II pairs a 1" silk dome tweeter with two 5-1/4" woofers. The tweeter is set within a shallow conical horn for accurate in-room frequency response with low distortion. The horn's uniform sound dispersion delivers highs consistently throughout the room, whether you mount the speaker vertically or horizontally. And the dual woofers offer punchy bass and mid frequencies for realistic movie dialog and music.
Slimmer chance of being seen
The R-2502-W II keeps a low profile with its SlimTrim™ grille. The visible frame size is reduced by 90% and grille depth is reduced by 80% over previous designs, for a nearly flush finish that blends in beautifully. The paintable, aluminum, magnetic grille attaches securely with ease to virtually eliminate resonant distortion.
An optional in-wall bracket is recommended for installing the R-2502-W II in new construction.
Got wire?
Most speakers don't include any. Learn more about in-wall wiring at the Crutchfield Learning Center.
Shop our selection of in-wall speaker wire.
Product highlights:
- 1" silk-dome tweeter
- dual 5-1/4" woofers
- frequency response 47-20,000 Hz (±3dB)
- handles up to 110 watts
- sensitivity 91 dB
- 8-ohm impedance
- paintable SlimTrim magnetic grille
- IR receiver knockout hole allows for infrared repeater
- cutout: 6-1/2"W x 16-7/16"H
- mounting depth: 3-1/4"
- warranty: lifetime
Priced each
- MFR # 1014128
What's in the box:
Klipsch R-2502-W II owner's manual
- Rectangular in-wall speaker
- White metal mesh grille
- Cardboard template
- Owner's Manual
Customer reviews for Klipsch R-2502-W II
Loading...
Loading reviews...
Average review:
5.0 out of 5 starsThanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Klipsch R-2502-W II
Features & specs
Features | ||
---|---|---|
Quantity in Package | Single | |
Tweeter | Horn-loaded dome | |
Aimable Tweeter | No | |
Woofer Composition | Polypropylene | |
Woofer Surround | Rubber | |
Connector Type | Spring posts | |
Bi-Amp Inputs | No | |
Built-in Back-box | No | |
Moisture Resistance | ||
Indoor (Moisture-resistant) | No | |
Outdoor (Partial Exposure) | No | |
Outdoor (Full Exposure) | No | |
Specs | ||
Tweeter Size | 1 | |
Midrange Size | N/A | |
Woofer Size | 5.25 | |
Speaker Shape | 6.5 x 16.4375 | |
Cutout Width | --- | |
Cutout Height | --- | |
Mounting Depth | 3.25 | |
Power Range (Watts) | 60 | |
Sensitivity | 91 dB | |
Impedance (Ohms) | 8 | |
Frequency Response | 47-20kHz | |
Parts Warranty | Ltd. Lifetime | |
Labor Warranty | Ltd. Lifetime |
Product Research
Features
High Efficiency: The high-efficiency design of the Klipsch in-wall speakers allows you to get much more output than most in-wall and in-ceiling speakers. Due to the long speaker wire runs that are common in whole-house audio systems, the power coming from the amplifier is significantly reduced by the time it reaches the speakers. The 91dB efficiency of this speaker means it will play much louder at low power than other less-efficient speakers.
Two-Way Design: The Klipsch R-2502-W II uses a high-quality 1" silk dome compression driver (tweeter) mated to a conical horn, combined with dual 5.25" polypropylene woofers in a 2-way design. The speaker's precision voiced crossover networks further ensure that the high and low frequencies are faithfully reproduced.
- Tweeter: A 1" silk dome tweeter mated to a pivoting conical horn generates pinpoint imaging and flat in-room frequency response. Klipsch horn-loaded technology increases acoustic output while significantly reducing distortion. The horn's 90° x 90° dispersion pattern allows the speaker to maintain the same high-frequency directivity whether the speaker is mounted vertically or horizontally (as a center). More direct sounds reach the main listening area with fewer reflections for more detailed sound, wider dynamics and better vocal clarity
- Dual Woofers: The R-2502-W II employs dual 5.25" polypropylene woofer cones for authoritative bass.
ABS Basket/Frame: The R-2502-W II has a sturdy ABS basket and frame. The frame can be painted to match any decor.
SlimTrim Magnetic Grille: With an all new grille, the visible frame size is reduced by 90% and grille depth is reduced by 80% over the previous design, for a more edge-to-edge consistent look that blends in with the wall more attractively. The new aluminum, paintable, magnetic grille attaches tightly and securely with ease to virtually eliminate resonant distortion.
Spring-Post Terminals: The Klipsch R-2502-W II in-wall speaker features two spring post terminals which will accept bare speaker wire (up to 12-AWG), pin-connectors or banana plugs (single/dual). The spring-post speaker terminals are color-coded (red/black) for easy identification between positive and negative.
Power Specifications Note: The manufacturer has specified the maximum power handling of this speaker as 60 watts RMS (240 W Peak). Klipsch has also published a recommended amplifier power specification as 110 watts.
Mounting Options
Dual Orientation: This in-wall speaker consistently delivers realistic sound whether it's installed vertically as a left or right channel speaker, or horizontally as a center channel speaker.
New Or Pre-Existing Installation: The speaker can be installed in new or existing construction. It requires a cutout of 6.5" (w) x 16.4375" (h), with a mounting depth of 3.25". For new construction, purchase of the IK-502-W installation kit (714IK502W) is highly recommended. For existing construction, the speaker should be installed in drywall at least 3/8" thick. A cardboard template is included to assist you in making the cutout.
IR Knockout: A 1/2" diameter knockout panel is provided in the lower left hand corner of the speaker frame for installing an IR sensor.
The Klipsch R-2502-W II replaces these items
Klipsch R-2502-W
- handles 60-110 watts RMS
- 1" silk-dome tweeter and dual 5-1/4" woofers
- frequency response 47-20,000 Hz
Loading...
Loading accessories...
Customer Q&A
2 questions already asked
Loading...
Loading articles...
Great speakers...set up for a surround sound system..paired them with Definitive Tech 5.5s as rear ....sounds great
dslnyc` from NYC