Overview: The MAXSA motion-activated outdoor light (model #
40241) helps you improve the safety and security of your family and your home by
providing you light when and where you need it most. It is perfect for power
outages or simply dark areas in and around your home. Its excellent for homes with young children or the elderly. The MAXSA
motion-activated outdoor light is fully weatherproof and battery powered
(requires no electricity).
4 LED Lights: The MAXSA motion-activated outdoor light is
equipped with four bright white LED bulbs to illuminate a up to 150'. The
brilliant LEDs will light your way, preventing you from falling down stairs or
tripping over objects. Its great for lighting up those dark areas in and outside your home.
Note: The LED bulbs will last approximately 30,000 hours.
Adjustable Angle: The MAXSA
motion-activated outdoor light (model # 40241) rotates in 2-directions, allowing
you to aim it where light is most needed.
Motion Sensor: The motion-activated outdoor light's front-panel
motion sensor turns the four LED lights on automatically when motion is
detected. The motion sensor has a detection area of approximately 25' within a
100° angle of the sensor. The LED lights will remain on as long as motion
continues to be detected. The lights will remain on for approximately 40 seconds
after the last detected movement. If a movement is detected while the lights are on, the light
duration will reset and remain on for another 40 seconds.
Note: The sensor is more sensitive to movement across
the detection area than movement directly towards or away from the sensor.
Light Sensor: The motion-activated outdoor light (model # 40241)
features an integrated light-sensor which activates the unit at dusk to conserve
Weatherproof: The MAXSA motion-activated outdoor light is fully
weatherproof and can be used either indoors or outdoors. It can be used outdoors
for steps, doors, walkways, porches, gates, sheds, garages, and decks. It can be used
indoors for hallways, stairways, closets, and bathrooms.
Mounting: The motion-activated outdoor light includes a
mounting bracket, self-adhesive mounting pad, and two mounting screws for simple installation. It can be
mounted on a wall or simply placed on the ground. Ideally the motion-activated
outdoor light should be mounted 6-8' above the detection area.
Note: The unit should not be located near light sources,
reflective surfaces, or heated devices. You should also install the
motion-activated outdoor light at least 25' away from the road, because
passing cars might activate the light.
Battery Powered: The MAXSA motion-activated outdoor
powered by four "D" batteries (sold separately). No wiring is needed.
Note: Batteries should last approximately 12 months depending on
Batteries Required: 4 "D" cell alkaline, Ni-MH, or
Wattage: Maximum 0.72 W, static < 0.3 mW
Voltage:6 V DC
Light Duration: approximately 40 seconds
Detection Angle: 100° (cone)
Maximum Detection Distance: 25'
Weatherproof Rating: IP44
Warranty: 90 day limited warranty