About the Peachtree220
With a fine component like the Peachtree220 stereo power amplifier, fancy words aren't really necessary. It's Peachtree. And it delivers 220 watts per channel of pure, controlled power from an attractive, low profile package that they're proud to put their highly-regarded name on. If you've spent any time listening to Peachtree products at all, you'll know that we've said enough for you to make a sound decision.
But hey, since you asked, we'll tell you more things you'll want to know. Instantly available clean power is the spark that ignites your music, and the '220 has plenty of it. You'll notice cleaner imaging and more extension on both ends of the audio spectrum as your speakers have the power they need to reproduce demanding frequencies and dynamic range.
The '220 takes both balanced XLR stereo inputs and unbalanced RCA stereo inputs. Two sets of high-quality 5-way binding posts will host speaker cables with banana plugs or spades, or just bare speaker wire.
This amplifier features a Class D design which delivers crisp treble and floor-shaking bass. It runs cooler than many other amps. And if you run 4 ohm speakers, the 220 will give you an even more impressive 400 watts per channel.
Product highlights:
- 220 watts per channel into 8 ohms; 400 watts per channel into 4 ohms
- balanced XLR and unbalanced RCA stereo inputs
- switchable voltage for international use
- frequency response: 20Hz-20kHz + .5dB
- detachable power cord
- 14-7/8"W x 4-15/16"H x 13-1/2"D
- weight: 16.34 lbs.
- warranty: 2 years parts and labor
- MFR # 220 Amp-BG
What's in the box:
- Stereo amplifier
- 5' AC power cord
- 2 Spare fuses
- Instruction Booklet
Featured video:
Customer reviews for Peachtree220
Loading...
Loading reviews...
Average review:
5.0 out of 5 starsThanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Peachtree220
Features & specs
General | ||
---|---|---|
Number of Channels | 2 | |
Power Output per Channel (8 ohms) | 220 | |
Power Output per Channel (6 ohms) | 0 | |
Power Output per Channel (4 ohms) | 400 | |
Frequency Bandwidth | 20-20k | |
THD | 0.5% | |
Minimum Impedance | 3 | |
Bridged Power per Channel | N/A | |
Speaker Outputs | 2 | |
THX Certification | No | |
Width (inches) | 14-7/8 | |
Height (inches) | 4-15/16 | |
Depth (inches) | 13-1/2 | |
Weight | 16.34 pounds | |
Parts Warranty | 2 Years | |
Labor Warranty | 2 Years | |
Inputs & Outputs | ||
Number of Inputs | 2 | |
Input Type | XLR, RCA | |
Removable Power Cord | IEC 3-prong | |
Level Controls | No | |
Speaker Connectors | 5-way post |
Product Research
Features
Class D Stereo Amp: The Peachtree220 features a Class D stereo amplifier for smooth sound and extended dynamics. The Peachtree220's Class D stereo amp is 90% energy efficient.
Amp Rating: The Class D stereo amp is rated at 220W x 2ch into 8-ohms, and 400W x 2ch into 4-ohms.
Colors: The Peachtree220 is available in three colors - Black, Cherry, and Rosewood.
Controls
Main Power Switch: The Peachtree220 is fitted with a main power switch on the rear-panel.
Standby Switch: Once you have turned the amplifier's main power switch to On, there is a Standby button on the front-panel to switch the amplifier On & Off.
RCA/XLR Selector: There is a push-button selector on the back-panel to switch between the amplifier's RCA and XLR inputs.
Voltage Selector: The rear-panel voltage selector lets you switch between 115V and 230V.
Connections
Balanced & Unbalanced Inputs: The Peachtree220 has both balanced and unbalanced inputs.
- Balanced XLR (Line In 1): Balanced XLR inputs are used to connect
high-end CD players and other high-end analog sources.
- Input Impedance of 100k
- Input Gain of 30dB
- Unbalanced RCA (Line In 2): The Peachtree220 is fitted with a
pair of unbalanced stereo RCA inputs to connect an analog audio source.
- Input Impedance of 50k
- Input Gain of 24dB
5-Way Binding Posts: The Class D stereo amplifier is fitted with two pair of 5-way binding posts terminals (Right +/-, Left +/-). The 5-way binding post terminals can accept bare wire, pin-connectors, spade-connectors, and banana plugs (single or dual). The binding post terminals are labeled Right/Left, and are color-coded for positive (red) & negative (black).
12-Volt Trigger: The 12-volt trigger input (3.5mm) enables automatic turn on and off from-or-to another source component with the same feature.
AC Input: The three-prong AC input on the rear-panel of the stereo amplifiers accepts the included 5' AC power cord (detachable).
Loading...
Loading accessories...
Customer Q&A
1 question already asked
Loading...
Loading articles...
For 33 years I have dreamed of owning a high end powerful amplifier. Turn up the volume and the sound is perfect. No distortion. Tremendous performance with Peachtree Nova Pre and and a pair of Definitive Technology Studio Monitor 65s and ProSub1000s. A truly invigororating experience!
Chatte from Birmingham AL