Bluetooth Music System: The Peachtree Audio Deepblue is a
high performance Bluetooth music system which allows you to connect wirelessly
to your Bluetooth-enabled Apple iPod touch/iPhone/iPad, Android
smartphone/tablet, Blackberry, computer/laptop, or other device. The Peachtree
Audio Deepblue supports Bluetooth (v2.1+EDR) A2DP/AVRCP which means you can transfer stored music and music apps
from your Bluetooth-enabled device to the Deepblue music system. Bluetooth has a
range of approximately 33' open air (distance will vary
with walls and your device's capability).
Simple Pairing: Bluetooth is a point A to point B connection. That means no
router or proprietary network with complex setup is needed. You can pair your
Bluetooth-enabled device in less than five minutes with the Peachtree Audio
Deepblue. After the initial pairing, your device will
auto-pair to the Deepblue when you select its Bluetooth input.
Note: Due to the differences in Bluetooth technology, some
Bluetooth enabled devices may be incompatible, function improperly, or may
not support all features when used with the Peachtree Audio Deepblue music
3-Way Speaker Design: Getting rich and clear sound from such a compact
speaker required five custom designed drivers dedicated to bass, midrange, and
highs to form a true three-way speaker system. Two 3" inverted dome aluminum
mid-ranges and two 1" soft dome tweeters are placed in their own housing,
isolated from the 6.5" bass driver, so you can hear every note
and every word of your favorite track. Massive magnets and large voice coils are
used to provide control and to handle large amounts of power. Materials optimal
to the task were specified at each step of the design process.
- Dual 1" Tweeters: The two 1" tweeters are a soft-dome material
with a smooth extended frequency response that sounds more natural than
metal-dome tweeters. Large 3/4" voice coils allow them to handle the amount
of power needed for them to keep up with the output of the other drivers so
the highs don't get lost.
- Dual Midrange Drivers: The two 3" midrange drivers don't need to
move as much air as the system's 6.5" bass driver, but they still must act
as a perfect piston, plus have wide sound dispersion. The midrange drivers
use inverted aluminum cones which dissipate voice coil heat build-up
allowing them to operate at their ideal temperature.
- 6.5" Bass Driver: The 6.5" bass driver is a long excursion
design. Due to its high output, a paper cone was selected for its high
stiffness-to-mass ratio which prevents the cone from flexing and outperforms
metal and other exotic materials in this respect. You hear not only full
bass, but bass that is tight and accurate.
240W/5Ch Amplifier: The Peachtree Audio Deepblue music system has a powerful, built-in
240-watt x 5-channel amplifier which delivers clean power with sound quality, deep bass, and
volume output of a much larger traditional HiFi system.
Digital Signal Processing w/ Smart Volume: A sophisticated Digital Signal Processor (DSP) allowed Peachtree
squeeze out every last ounce of performance, giving the Deepblue fullness and
clarity. The Deepblue music system tracks the incoming
music signal for its continuous and peak signals to provide clear
distortion-free sound at any volume. The Digital Signal Processor adjusts
frequency response for full sound at low volume settings and will activate
compressors to lower dangerous peak signals when the music is being played at
loud volumes to prevent clipping. This ensures great sound and reliable
Bass Control: Out of the box, the Deepblue's
bass is set at a level that achieves the best balance of bass output for most
situations. You will find that bass output is greatly affected by walls and
surfaces within close proximity to the Deepblue music system,
especially if you place it in a corner which will boost bass. On the included
remote, you'll find Bass +/- buttons which allow you to adjust
Deepblue's bass for your room. Once set, Deepblue
remembers your last setting so all you have to do is turn it on and press play.
IR Remote: The included IR remote control allows you to operate
Power, Source, Volume, and Bass functions of the Deepblue music system. You can
also control basic playback functions (Play/Pause, Next/Previous Track) of your paired Bluetooth-enabled device.
Auxiliary Input: The Peachtree Audio Deepblue is fitted with a 3.5mm
auxiliary input and comes with a stereo minijack cable to connect your
non-Bluetooth audio devices with a headphone jack output. Even a traditional
audio component, like a CD player can be connected with a simple RCA-to-mini
adaptor (sold separately).
AC Power: The Peachtree Audio Deepblue operates off of
standard household current (100-240V~50/60Hz)
using the supplied 6' AC power cord. To save power, the unit will automatically
go into standby mode when the speaker system is idle for approximately 12 hours.
Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to
find elsewhere. That's because we have our own in-house Product Research
team. They verify what’s in the box, check the owner's manual, and record
dimensions, features and specs. We stay on top of new products and technologies
to help people make informed choices.