Skip Navigation

Definitive DI 4.5R Rough-in Brackets

Pre-construction brackets for Definitive Technology DI 4.5R in-ceiling speakers

Item #: 73545RRIK

Low Stock

Outlet: Open Box

Was: $60.00

Outlet Savings: -$6.00

Add to Cart

Ask an expert

Our VA-based experts can help.

1.888.955.6000

ChatEmail

Add to Cart

Definitive DI 4.5R Rough-in Brackets

Overview

Our take on the Definitive DI 4.5R Rough-in Brackets

These pre-construction brackets are designed for Definitive Technology DI 4.5R in-ceiling speakers. Use the adjustable arms to attach the bracket to studs or joists before the drywall goes up.

What's in the Box:

  • 2 Metal in-wall mounting rings
  • 4 Metal mesh arms

Product Highlights:

Reviews

Definitive DI 4.5R Rough-in Brackets Reviews


Details

Hands-on research

What's in the box?

  • 2 Metal in-wall mounting rings
  • 4 Metal mesh arms

Product Research

Features

Overview: When planning speaker installations in new construction many installers find it useful to install rough-in brackets onto wall studs or ceiling joists so that the sheetrock contractor knows precisely where to cut the appropriate size holes. The DI Series rough-in brackets were custom designed from the ground up to be easy to install. The "arms" are metal mesh and can easily be attached to wood or metal studs using nails, dry-wall screws, or construction staples. The arms easily detach and can be positioned at various points around the bracket to accommodate unusual stud/joist locations. The center ring is heavy gauge steel that will not bend or break with rough handling and sloppy drywall cutting by subcontractors. The convenient wire tie loop is scored to allow easy snap off once the speaker is installed.

Compatibility: The DI 4.5R rough in bracket is compatible with Definitive Technology's 4.5" Disappearing In-Wall Loudspeaker (DI 4.5R).

Note: DI Rough-in Brackets are packaged two to a carton (2 mounting rings and 4 mounting arms). Mounting screws not supplied.

Metal Rings: The center rings are fabricated from heavy duty painted stamped steel. There are no sharp metal edges to cut an installer's hands and they are ultra rigid, so that when drywall is laid over and cut the brackets will not bend or break. The center ring requires a 4.5625" diameter cutout.

Mounting Arms:  The metal mesh mounting arms snap onto the center ring in a variety of positions to cover almost any installation. The wings can be attached with nails, staples or screws; and can be bent and easily trimmed with tin snips. They are also thin enough to make stud notching simple. The wire tie loop easily breaks away when the speaker is installed.

Dimensions:

  • Metal Ring: Diameter = 5.9375", Depth = 0.8125"
  • Mounting Arms: Width = 12.4375", Height = 1.9375", Depth = 0.5625"
  • Overall Dimension: Width = 39.375", Height = 5.9375", Depth = 0.8125"
  • Cutout: Diameter = 4.5625", Depth = 0.4375"

Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.

Q & A

Customer Q&A

Library