1.888.955.6000
crutchfield.com
Crutchfield

Definitive Technology DI 6.5STR

In-ceiling stereo input speaker

Zoom
  • Definitive Technology DI 6.5STR

    Grille off

  • Definitive Technology DI 6.5STR

    Back

  • Definitive Technology DI 6.5STR

    Cutaway

  • Definitive Technology DI 6.5STR

    Paintable, low-profile grille

 

Our take on the Definitive Technology DI 6.5STR

by Tara W.
Definitive Technology

Definitive Technology's DI 6.5STR stereo speaker is an ideal solution in areas where you don't have room for a pair of speakers, like hallways, bathrooms, or kitchens. This speaker installs flush in your ceiling. With its paintable, low-profile grille and hidden flange, it's practically invisible.

The DI 6.5STR pairs two aimable 3/4" aluminum tweeters with a 6-1/2" driver for precise highs, full-bodied bass, and impressive dynamic range. The speaker features inputs for both left and right channels, so you'll hear both halves of stereo music.

Read more

An optional Definitive Technology DI 6.5R rough-in bracket is recommended for installing this speaker in new construction (brackets sold in pairs).

Got wire?
Most speakers don't include any. Learn more about in-wall wiring at the Crutchfield Learning Center.
Shop our selection of in-wall speaker wire.

Did you know?
Your new speakers will probably sound better after several weeks of use than they do right out of the box. That's because the material surrounding the woofers will loosen up, allowing the drivers to move more fully. Definitive Technology estimates a break-in period of 24 to 48 hours of playback before the speakers will deliver optimum sound quality. For more information and helpful tips, check out this article from Definitive's website about conditioning your speakers.

Highlights:

  • frequency response 26-30,000 Hz (±3dB)
  • two aimable 3/4" Pure Aluminum dome tweeters
  • 6-1/2" woofer
  • Disappearing™ In-ceiling speaker design, including hidden flange and low-profile grille
  • handles up to 125 watts per channel
  • sensitivity 90 dB
  • impedance: 4-8 ohms
  • paintable white matte grille
  • magnetic grille for easy installation
  • cutout dimensions: 7-1/4" diameter
  • mounting depth: 3-1/16"
  • warranty: 5 years
  • Our 60-day money-back guarantee

Priced each

Hands-on research from the Crutchfield Labs (what are the Labs?)

Features and Specs
Enclosure Type In-ceiling
Video Shielded No
Tweeter Dome
Midrange Size ---
Woofer Size 6.5
Woofer Composition Polymer
Woofer Surround Rubber
Power Range (Watts) 10-125
Sensitivity 90 dB
Impedance (Ohms) 8
Frequency Response 26-30kHz
Connector Type Spring clips
Bi-Amp Inputs Stereo input
Parts Warranty 5 Years
Labor Warranty 5 Years
Product Research
What's in the box?

Download owner's manual

  • 6.5" Round in-ceiling stereo speaker
  • White grille (paintable)
  • Four mounting screws (installed)
  • Cut-out template
  • Owner's Manual
  • Online Product Registration card

Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team — they open the box, verify contents, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.

Overview: The Definitive Technology Disappearing In-Wall loudspeaker (DI Series) offers high-quality sound from a speaker that is barely visible when installed in a wall or ceiling. The Definitive DI Series incorporates a BDSS driver, pivoting tweeters, and integrated flanges behind an unobtrusive grille to provide audiophile-grade sound quality with an almost invisible appearance. The DI 6.5STR is a mere 8-5/16" (21.04cm) in total visible diameter, which is about the same size as competing 5-1/4" in-wall/in-ceiling models.

Features
Mounting Options

Features

Disappearing In-Wall Design: The DI 6.5STR features Definitive Technology's Disappearing In-Wall Design. The mounting flange thickness of the in-wall/in-ceiling loudspeaker is no more than 2.5mm (0.099") and is completely covered by the grille that stands a mere 3.5mm (approx 0.125") from the wall surface. The grille is "micro-perf", that while presenting an opaque appearance, actually has more open area than typical perforated metal grilles allowing the sound to pass through with less interference and better fidelity. Behind the metal grille is an acoustically transparent proprietary cloth scrim that effectively blacks the dark "shadow" of the black speaker parts from showing through the grille.

Stereo Application: The DI 6.5STR is a "stereo" speaker, both left and right channels are fed into a single speaker. Dual angled tweeters disperse the sound in broad area to approximate the spaciousness of two speakers. The DI 6.5STR is the perfect solution in spaces where you want sound, but where using two speakers is not practical or economical-such as hallways, kitchens, bathrooms and offices.

Pivoting Aluminum Dome Tweeter with Waveguide: The DI Series in-wall/in-ceiling loudspeaker uses two Definitive Technology's proprietary ceramic-coated annealed aluminum 0.75" dome tweeters. The DI 6.5R tweeters are post mounted, and the tweeters' housing is specially smoothed and shaped to use it as an extremely effective low-diffraction waveguide. The aluminum dome tweeters features a pivoting design which allows you to focus the sound toward or away from your listening area depending on the application.

BDSS Drivers: The DI 6.5STR uses a 6.5" BDSS driver for wide-bandwidth accurate frequency response, broad dispersion, low distortion, and maximum detail retrieval. The 6.5" BDSS driver cone is supported by specially tuned soft rubber surrounds at both the outer and inner edges. The double surrounds allow the cone to have longer excursion without distortion. As bass output is a function of both a cone's diameter and excursion, the higher excursion BDSS system brings the benefit of higher bass output from smaller drivers. The DI 6.5STR's 6.5" BDSS driver has the bass output and dynamic range of a typical 8" driver.

Linkwitz-Riley Crossover Network: The Definitive Technology DI 6.5STR's second order (12dB/octave) Linkwitz-Riley crossover offers a smooth frequency and phase transition from driver to tweeter for natural midrange response and excellent off-axis performance. A Zobel network flattens the impedance curve of the speaker making it easier for today's digital amplifiers to drive the speakers. Custom tight-tolerance (+/- 5%) components are used throughout the crossover for superb unit-to-unit performance consistency. Superior metal film capacitors are used in the high-pass section and the Zobel network for extended high frequency response. Oversize inductors (coils) avoid saturation thereby maintaining the wide dynamic range capabilities of the driver.

Environmental EQ: The Environmental EQ switch (on top-frame of speaker) provides a 1dB broad bandwidth tweeter output lift or cut to compensate for highly absorptive or reflective acoustic environments.

AeroRing: The dimpled AeroRing is soft Sanoprene rubber and serves several important functions. First, it damps the basket/flange assembly nearest its thinnest part (the flange) to prevent resonance. Second it prevents the grille from rattling in the unlikely event that it makes contact with the speaker frame. It also provides a smooth transition for the waveform coming off the cone. Similar to the dimples on a golf ball that reduce turbulence to aid in longer flight, the dimples on the AeroRing promote smooth "laminar" air flow over the surface thereby reducing diffraction effects. The DI Series in-wall/in-ceiling loudspeakers sound clear, natural, and disperse their sound over a wide area.

PolyStone Basket: The driver basket, mounting flange, and mounting system of the DI 6.5STR is one piece of cast PolyStone; Definitive's exclusive formulation of polymers and minerals that combine the rigidity and strength of metal with the resonance damping properties of plastics. As a result of the one-piece mounting system, the DI 6.5STR offers increased strength, a compact size, and maximized cone area. Besides being more space efficient than multi-piece construction, it also contributes to the superior sound quality of the DI Series speakers.

Connections: The DI 6.5STR features a two pairs of heavy-duty, gold-plated, spring-loaded wire terminals that have oversized holes to accept up to 10 gauge wire.

Definitive's GaussGrip System: Definitive's GaussGrip system securely holds the grille of the in-wall/in-ceiling loudspeaker in place with powerful magnets. Simply lay the grille over the speaker and its secure. Taking off the grille is just as easy and fast; no special tools that can chip the grille paint are required. All you need to remove the grille is your fingers.

Paintable Grille The DI Series in-wall/in-ceiling loudspeaker's white "micro-perf" cloth grille can be spray painted to match the color of your wall or ceiling without any loss of sound quality. Simply remove the grille from the speaker and place it on a drop cloth, newspaper, or plastic sheet and spray paint it with canned spray paint that closely matches the desired finish/color; or with indoor latex paint using an airbrush or spray gun (available at home improvement stores). The paint must be diluted to a 6:1 ratio of latex paint to water. Do not remove the backing cloth (scrim). Apply the paint in a series of thin coats sprayed at 45-60 degrees from the grille surface, allowing each coat to fully cure before applying additional coats. To ensure that the paint distribution is evenly applied, each coat should be applied from 4 different directions (N,S,E, & W) to ensure an even coverage on the grille.

Note: The grille must be spray painted detached from the speaker. Do not paint the grille with a brush or roller.

Mounting Options

Mounting: The DI 6.5STR can be mounted in-ceiling using the integrated rotating clamps and four mounting screws, or using an optional pre-construction bracket (73565RRIK, sold separately). A cutout template is supplied to help you cut a 7-1/4" diameter hole. You will need to allow at least 1/2" of space around the cutout and have at least 3-1/16" of clearance for mounting depth (using 1/2" thick mounting surface). You should allow at least 7/8" from the edge of the cutout to nearest obstruction inside the mounting surface.

Optional Pre-Construction (Rough-In) Brackets: The optional DI Series pre-construction rough-in brackets provide a simple way to mount these in-wall/in-ceiling loudspeaker during pre-construction or remodeling of your home. The center rings are fabricated from heavy duty painted stamped steel. There are no sharp metal edges to cut an installer's hands and they are ultra rigid, so that when drywall is laid over and cut the brackets will not bend or break. The two 12" wings are painted perforated metal that snap onto the center ring in a variety of positions to cover almost any installation. The wings can be attached with nails, staples or screws; and can be bent and easily trimmed with tin snips. They are also thin enough to make stud notching simple. The wire tie loop easily breaks away when the speaker is installed. DI Rough-in Brackets are packaged two to a carton.

 
Review this product
Great Gear Giveaway rewards card

Submit a review and then enter to win a $500 rewards card

Definitive Technology DI 6.5STR Reviews

Average Customer Review:

1 people say:

Review this product:

Thanks for taking the time to share your experiences about this product. Please be sure to focus your comments on the product itself. Read our Review Guidelines for more information.

Your email won't be visible. Please use the email address that is associated with your order.
(e.g., JohnD) Your review will be signed using the display name and location
(e.g., Charlottesville, VA)

Click on a star to rate the overall product on a scale of 1-5
1500 characters left
Attach a YouTube Review
Crutchfield Video Review Guidelines
  • Only submit videos that you made or are authorized to use.
  • Do not submit videos that contain music, video or visuals that are copyrighted and belong to someone else.
  • Please see our Review Guidelines for more information.
500 characters left
500 characters left
Filter by rating:
5 out of 5

Awesome

Written By John N, Austin, Texas on Saturday, March 26, 2011
 
We installed three of these: one in the kitchen, one in the dining room, and one in the "library". While we installed two of the DI6.5R (non-stereo) speakers in the living room, we opted for these two-channel individual speakers for these other smaller rooms. We are happy with this decision. The sound quality is crystal clear with sufficient bass, and we reduced cost and installation effort. Would definitely make the same decision again now that we have heard the results.
9 out of 10 people found this helpful
Was this review helpful?    Yes | No
 

Add accessories for the Definitive Technology DI 6.5STR

UL-listed speaker wire is designed to be run through walls and is building code compliant. Most speakers don't include speaker wire. See all categories & accessories

AudioQuest FLX-14/2 14-Gauge 2-Conductor In-Wall Speaker Cable UL-approved for in-wall use; direct-burial rated (125 feet)
51 people say
Your Price: $129.99
Add to Cart
AudioQuest FLX-14/4 14-Gauge 4-Conductor In-Wall Speaker Cable UL-approved for in-wall use; direct-burial rated (125 feet)
2 people say
Your Price: $219.99
Add to Cart
AudioQuest FLX-16/2 16-Gauge 2-Conductor In-Wall Speaker Cable UL-approved for in-wall use; direct-burial rated (125 feet)
28 people say
Your Price: $99.99
Add to Cart
AudioQuest FLX-16/4 16-Gauge 4-Conductor In-Wall Speaker Cable UL-approved for in-wall use; direct-burial rated (125 feet)
7 people say
Your Price: $159.99
Add to Cart
Definitive Technology DI 6.5R-6.5STR Rough-in Brackets Pre-construction brackets for Definitive Technology DI 6.5R and 6.5STR in-ceiling speakers
2 people say
Your Price: $60.00
Add to Cart
Russound Flexbox For in-ceiling speakers
Your Price: $199.99
Add to Cart
Niles SS-4 4-pair speaker selector
22 people say
Your Price: $129.99
Add to Cart
Niles SS-6 6-pair speaker selector
8 people say
Your Price: $174.99
Add to Cart
Russound SS-4.2 4-pair speaker selector
6 people say
Your Price: $119.00
Add to Cart
Russound SS-6.2 6-pair speaker selector
1 person says
Your Price: $159.00
Add to Cart
Niles SSVC-2 2-pair speaker selector with volume control
4 people say
Your Price: $249.99
Add to Cart
Niles SSVC-4 4-pair speaker selector with volume control
7 people say
Your Price: $399.99
Add to Cart
Niles SSVC-6 6-pair speaker selector with volume control
6 people say
Your Price: $474.99
Add to Cart
Russound SDB-2.1 2-pair speaker and source selector with volume control
1 person says
Your Price: $199.00
Add to Cart
Russound SDB-4.1 High-power 4-pair speaker selector with volume control
1 person says
Your Price: $399.99
Add to Cart
Russound SDB-6.1 High-power 6-pair speaker selector with volume control
Your Price: $499.99
Add to Cart
Niles VCS HUB8 8-speaker pair connecting block
6 people say
Your Price: $79.99
Add to Cart
Niles SVC100K Sliding stereo volume control with impedance magnification
Your Price: $129.99
Add to Cart
Russound ALTX-WIRI-2D Electronic volume control with IR sensor and impedance magnification
Your Price: $159.00
Add to Cart
Niles VCS100K Stereo volume control with impedance magnification
4 people say
Your Price: $99.99
Add to Cart

Why choose SquareTrade?

The #1-Rated Protection Plan

Thousands of people have reviewed SquareTrade Protection Plans — and made us #1.

5-Day Service Guarantee & Free Shipping

We'll repair or replace your item in five business days or less after we've received it, or your plan is free. And, as always, we pay for all shipping.

Protection from Normal, Everyday Use

Repairing your average mechanical or electrical failure can cost as much as buying a new device. With SquareTrade, you're covered — including parts and labor.

For a more in-depth review and enhanced detailed information on the Definitive Technology DI 6.5STR, please visit the Crutchfield website product page (/ISEO-rccbcspd/p_735DI65STR/Definitive-Technology-DI-6-5STR.html ).