About the NAD PP375
Upgrade your NAD C375BEE or C356BEE integrated amp with the PP375 phono preamp module, then fire up your turntable to enjoy exceptional vinyl LP playback. This module adds connections for your turntable onto the amplifier's back panel. Two separate, switchable inputs accommodate both moving magnet and moving coil phono cartridges. You'll get outstanding sonic performance at a reasonable price.
Important note: The installation of this module should be handled by an NAD authorized dealer or an authorized NAD service center. This is not intended to be a user installed accessory.
Product highlights:
- separate selectable inputs for moving magnet and moving coil phono cartridges
- THD: <0.009%
- installation should be handled by an NAD authorized dealer or an authorized NAD service center; not intended to be a user installed accessory
- built-in low-frequency rumble filter reduces wasted amplifier power at frequencies below audible levels
- 3-5/16"W x 1-5/8"H x 2-5/16"D
- warranty: 1 year
- MFR # PP375
What's in the box:
- NAD PP 375 Phono Preamplifier Module
- Flat-flexible cable
- Mounting Instructions
Customer reviews for NAD PP375
Loading...
Loading reviews...
Average review:
4.5 out of 5 starsThanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the NAD PP375
Features & specs
Features | ||
---|---|---|
Cartridge Type | RCA | |
Subsonic Filter | No | |
Cartridge Loading | --- | |
Adjustable Resistance Load | No | |
Adjustable Capacitance Load | No | |
Vacuum Tube | No | |
Connections | ||
RCA Inputs | 1 pair | |
XLR Inputs | No | |
RCA Output | 0 | |
XLR Output | No | |
USB Output | No | |
3.5mm Output | --- | |
Optical Output | --- | |
Coaxial Output | --- | |
Specs | ||
Signal-to-noise Ratio (MM) | Not given | |
Signal-to-noise Ratio (MC) | Not given |
Product Research
Features
Overview: The NAD PP 375 Phono Preamplifier Module is an add-on accessory for the NAD C375BEE and C356BEE Stereo Integrated Amplifiers. From the factory, the C375BEE and C356BEE have no phono inputs. The PP 375 Phono Module requires installation to replace the dummy plate on the rear panel in order to create an input. Once installed, the module will accept both moving magnet or moving coil cartridges.
Installation: The PP 375 phono preamplifier module installs and mounts inside of the integrated amplifier. The installation should be performed by an NAD-authorized servicing dealer, and not the consumer.
Specifications Tables: The Specification table for PP 375 phono preamplifier module.
PP375 | Moving Coil (MC) | Moving Magnet (MM) | |
---|---|---|---|
Input Sensitivity | 1.6mV | 18mV | |
Input Overload | >4mV (20Hz-20kHz | >40mV (20Hz-20kHz) | |
RIAA Accuracy | +/- 0.25dB | ||
Total Harmonic Distortion | <0.03% (20Hz-20kHz) | ||
IHF A Signal to Noise | >76dB (110 Ohms load) | >77dB (IHF cartridge load) | |
Channel Separation | 1kHz | >80dB | >80dB |
10kHz | >70dB | >70dB |
Loading...
Loading accessories...
Customer Q&A
Loading...
Loading articles...
I bought this when I bought my Nad 375BEE to run my new Pro-ject Debut Carbon. Easy install and sounds great with my new gear. Highly recommend !!!!!
Brad C. from Yukon, Ok.