D'Appolito Array: The
PSB Alpha Series T1 floor-standing speakers utilize a D'Appolito array design
with dual 5.25" woofers paired with a 0.75" ferrofluid-cooled tweeter for
increased on- and off-axis response while yielding wide dispersion.
Dual 5.25" Woofer: Each PSB Alpha Series T1 loudspeaker
employs dual 5.25" injection molded metalized polypropylene woofers with rubber
0.75" Tweeter: Each Alpha Series T1 tower speaker is
equipped with a 0.75" aluminum dome, ferrofluid-cooled tweeter.
Waveguide: The T1's tweeters utilize an
acoustical waveguide to deliver, more even high frequency response, no
matter what part of the room you're in.
Crossover Network: The tweeter and woofers are
crossed over at 3,300 Hz.
Magnetically Shielded: The T1 is magnetically
shielded for safe placement adjacent to your television.
Wood Grain Vinyl Cabinet: The PSB Alpha Series T1
features a black wood grain vinyl cabinet that matches almost any decor.
Bass Reflex Design: The PSB T1 tower loudspeakers
utilize a bass reflex enclosure with a rear-firing port for greater
efficiency and bigger bass response.
Aluminum Grille: The speakers come with removable
aluminum (metal-mesh) black grilles.
Dual 5-way Binding Posts: The dual binding post
input terminals are located on the lower rear of the speaker cabinet.
The two sets of binding posts are shorted together by a gold-plated
jumper. With the jumper removed the PSB T1 tower speaker can be bi-wired
or bi-amplified. The dual 5-way binding posts will
accept bare wire (up to 12-gauge), pin connectors, spade connectors,
banana plugs, and dual banana plugs.
Color-Coded: The speaker's binding posts are
color-coded (red/black) for easy identification between positive and
Leveling Feet: The PSB T1 tower speakers includes two sets
of leveling feet - Rubber (for tile or hardwood) or Spiked (for carpet).
- Rubber Feet: The adjustable rubber feet are used on a hard
surface flooring and add approximately 0.375" to the height of the speaker.
- Spiked Feet: The adjustable spiked feet are used on carpeted
flooring and add approximately 0.75" to the height of the speaker.
- On Axis @ 0°: 55-21,000 Hz (+/-3dB)
- Off Axis @ 30°: 55-10,000 Hz (+/-3dB)
- Low Frequency Cutoff -10 dB: 45 Hz
- Anechoic Chamber: 89dB
- Typical Listening Room: 91 dB
Internal Volume: 1.9 cu ft
Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to
find elsewhere. That's because we have our own in-house Product Research
team. They verify what’s in the box, check the owner's manual, and record
dimensions, features and specs. We stay on top of new products and technologies
to help people make informed choices.