Chat
Contact us
Close contact box
Connect ID #
929 482 387 4
Connect ID #
929 482 387 4
Don't wait on hold. We'll call you back when it's your turn to talk with the next available .
Please enter your name  
Please enter your phone number  
Please enter a message  

Calls may be recorded for training and quality control purposes.

We are located in Virginia USA.

Thank you. We will be calling you .
We're sorry. We have encountered a problem.

PSB CW260 Bipole/dipole in-wall surround speaker

Item # 760CW260

Each CW260 has two wide-range 2" drivers firing away from each other at a 90-degree angle, positioned on a...

Each CW260 has two wide-range 2" drivers firing away from each other at a 90-degree angle, positioned on a...

Item # 760CW260

Shop all PSB In-wall Speakers

About the PSB CW260

You're surrounded!

Each CW260 has two wide-range 2" drivers firing away from each other at a 90-degree angle, positioned on a specially contoured mounting plate. This design provides an expansive soundfield, perfect for larger home theaters or for making smaller spaces sound bigger. PSB included a bipole/dipole switch to help optimize the sound for different speaker-mounting locations — dipole mode usually sounds best for side-wall placement, while bipole mode can work well for back-wall placement. A 6-1/2" mid/woofer handles midrange and bass sounds. Just play your favorite movie and you'll find yourself instantly immersed. And with their paintable grilles, these speakers blend right into your walls so when the dust of your favorite film skirmish settles, all you'll see is the good guys riding off into the sunset.
Driver configuration

Angled drivers help expand your home theater's soundfield.

You're surrounded!

The PSB recipe of sonic excellence carries into their in-wall/in-ceiling speaker series with these high-performance CW260 surrounds. You'll hear the guns blazing and the pounding hoofbeats of the rescuing cavalry because these speakers have got you covered.


Caught in the crossfire

Each CW260 has two wide-range 2" drivers firing away from each other at a 90-degree angle, positioned on a specially contoured mounting plate. This design provides an expansive soundfield, perfect for larger home theaters or for making smaller spaces sound bigger. PSB included a bipole/dipole switch to help optimize the sound for different speaker-mounting locations — dipole mode usually sounds best for side-wall placement, while bipole mode can work well for back-wall placement. A 6-1/2" mid/woofer handles midrange and bass sounds. Just play your favorite movie and you'll find yourself instantly immersed. And with their paintable grilles, these speakers blend right into your walls so when the dust of your favorite film skirmish settles, all you'll see is the good guys riding off into the sunset.

Back shot

Got wire?

Most speakers don't include any. Learn more about in-wall wiring at the Crutchfield Learning Center.
Shop our selection of in-wall speaker wire.

Product Highlights:

  • sold individually
  • switchable bipole/dipole speaker
  • frequency response 50-21,000 Hz (-6dB)
  • dual 2" midrange drivers
  • 6-1/2" fiberglass textured woofer
  • handles up to 100 watts
  • sensitivity 87 dB
  • 8-ohm impedance
  • bipole/dipole switch for use in side-wall and rear-wall locations
  • treble switch provides +/-2dB frequency adjustments
  • paintable white matte grille
  • cutout: 8-1/2" x 14-3/8"
  • mounting depth: 3-1/2"
  • 5 year warranty
  • MFR # CW260

What's in the box:

  • One CW260 in-wall surround speaker
  • White aluminum grille
  • Clear plastic paint mask (installed)
  • Cardboard cutout template
  • Self-adhesive "PSB Speakers" badge
  • Installation Guide (Eng / Fren / Span)
  • Warranty sheet (Eng / Fren)

Customer reviews for PSB CW260

Loading reviews...

Average review:

4.0 out of 5 stars
2 reviews

Thanks for submitting your review

Filter by rating

Customer photos

Customer provided image, click to load a larger version.
Customer provided image, click to load a larger version.

Sort reviews

Sort by:
Items per page:
View page:

Verified customer (What's this?)
Verified employee review (What's this?)

Reviewed on Samsung.com

This review was collected as part of a promotion

Pros:

Cons:

Crutchfield response
Customer provided image, click to load a larger version.
<< >>

More details on the PSB CW260

Stacey B.

Features & specs

Features
Quantity in Package Single
Tweeter Cone
Aimable Tweeter No
Woofer Composition Polypropylene
Woofer Surround Rubber
Connector Type Spring post
Bi-Amp Inputs No
Built-in Back-box No
Moisture Resistance
Indoor (Moisture-resistant) Yes
Outdoor (Partial Exposure) Yes
Outdoor (Full Exposure) No
Specs
Tweeter Size 2
Midrange Size ---
Woofer Size 6.5
Speaker Shape 8.5 x 14.375
Cutout Width ---
Cutout Height ---
Mounting Depth 3.4375
Power Range (Watts) 20-100
Sensitivity 87 dB
Impedance (Ohms) 8
Frequency Response 50-21kHz
Parts Warranty 5 Years
Labor Warranty 5 Years

Product Research

Features
Mounting Options
Specifications

Features

Overview: The CW260 from PSB Speakers is a high-performance wall-mount surround speaker. It is designed to be used as a surround speaker in a 5.1- or 7.1-channel system. It has dual switchable radiation patterns to provide a more diffuse soundfield than conventional speakers. The CustomSound CW Series of in-wall/in-ceiling speakers incorporate the same speaker arrays as found in PSB's highly acclaimed Platinum-series speakers for true audiophile performance.

Note: The CW260 is a single speaker.

Drivers: The CW260 speaker employs a 6-1/2" fiberglass-textured polypropylene woofer, which has a higher cone mass and enhanced motor strength for higher power handling. The rubber surround damps resonance and provides exceptional durability. The speaker has dual 2" wide-range cone drivers, cross-firing at 90 degrees to each other (one 45 degrees right and the other 45 degrees left). The drivers are mounted on a contoured mounting plate to obtain a smooth response, and to allow their energy to appropriately fire away from the listening area. The mounting plate can be removed and rotated 90 degrees if the speaker is mounted horizontally on the wall instead of vertically.

Soundfield Adjustment Switch: The CW260 has dual switchable radiation patterns. With the switch in the "Dipole" position, a distinct null is created straight out from the speaker. Sound will be very diffuse, and will reach the listener only after several bounces off of the room's walls. With the switch in the "Bipole" position, a very diffuse soundfield is created by sending the majority of the sound away from the listening position. The effect is not as great as in the "Dipole" position.

Treble Level Switch: Because in-wall speakers are surrounded by hard surfaces that reflect the sound output, it may be necessary to adjust the high frequencies. The speaker features a 2-way switch. The "Treble +" position boosts the high frequencies, and will tend to flatten the power response when used in the dipole setting. The "Treble -" position gives a more flat direct soundfield, and may better suit the bipole setting. It may be necessary to experiment with the switches to see which position best suits your personal taste.

Frames: The white ABS plastic frame extends approximately 3/4" beyond the grille on the finished side. The frame also extends about 5/8" beyond the rough opening cutout. The speaker requires a 8-1/2" x 14-3/8" wall cutout for mounting the speaker.

Grille: The speaker is equipped with a flush-mount aluminum grille for a clean and unobtrusive look. The grille has hundreds of precisely-sized perforations to make them acoustically transparent. The grille and frame are paintable to match any decor.

Mounting Options

Mounting Clamps: The CW260 has 6 toggle-style mounting clamps for installing the speaker in the wall. When a Phillips-head screwdriver is first applied to the mounting screws, the clamps "toggle" out from a rest position (out of the way for easy insertion), turning 90 degrees and into a position to clamp firmly against the wall.

Pre-construction Bracket: For new construction, the optional CK-66 pre-construction bracket is recommended (available from the manufacturer). The bracket is designed to be a "hole-saver" to indicate where the speaker should be installed before the drywall goes up. In addition, an optional BBX-88 Performance Enclosure (available from the manufacturer) defines the optimal enclosure volume for the CustomSound series speakers, and mounts between two studs behind drywall.

Specifications

Mounting Dimensions:

  • External Frame Dimensions: 9.498" W x 15.375" H
  • Hole Cutout: 8-1/2" W x 14-3/8" H
  • Depth Behind Mounting Surface: 3.4375"
  • Height Above Mounting Surface (incl. grilles): 0.5"

Performance Specs:

  • Frequency Response: 50Hz to 21kHz (-6dB)
  • Recommended Amplifier Power: 20 to 100 Watts
  • Sensitivity: 87dB
  • Impedance: 8 Ohms

Loading accessories...

Customer Q&A

Loading articles...

Compare the sound