True-to-Nature Sound: The PSB Imagine mini bookshelf loudspeaker
produces a large soundstage and impressive bass along with the true-to-nature sound
for which PSB is known. The PSB Imagine mini has a wide frequency and dynamic range,
natural tonal balance, and precise spatial imaging needed to make both music and
movies lifelike and enjoyable.
2-Way Design: The PSB Imagine mini employs a 2-way speaker
design. It houses a single 1" ferrofluid-cooled titanium dome tweeter with
a neodymium magnet and one 4.5" clay/ceramic filled polypropylene woofer
with rubber surround. The result is startlingly big and commanding sound with
fine detail and emotion.
- 1" Titanium Dome Tweeter: The 1"
titanium dome, ferrofluid-cooled tweeters use a neodymium magnet
structure to help extend the frequency response at both ends for
effortless, airy top octaves and smooth, uncolored response.
- 4.5" Clay/Ceramic Filled Polypropylene Woofer: The
4.5" woofer cone is clay/ceramic filled polypropylene to optimize the
combination of stiffness, internal damping, and low mass. The woofer's
magnetically neutral polycarbonate basket contributes additional stiffness,
and the bullet-shaped phase-plug enhances linearity at higher frequencies.
Crossover Network: PSB engineers designed the crossover frequency
very low relative to the woofer size in order to provide the same sound no matter
where the speaker is placed. The crossover is a 2-way acoustical fourth order
Linkwitz-Riley type with a 24 dB/octave slope. The tweeter and woofer are crossed
over at 2,200 Hz.
Small Cabinet: The PSB Imagine mini bookshelf loudspeaker is
the smallest member of the imagine family. The cabinet measures just 5.6875"
(w) x 9.375" (h) x 8.25" (d), and weighs only 6.5 lbs.
Bass Reflex Enclosure: The PSB Imagine mini bookshelf
loudspeaker uses a bass reflex enclosure with a rear-firing port for higher
efficiency and deeper bass.
Detachable Grille: The PSB Imagine mini includes a detachable
Binding Posts: The binding post input terminals are located on
the bottom of the speaker cabinet. The binding posts will accept spade connectors,
pin connectors, and bare wire up to 8 gauge. Single banana plugs also fit, but because
the posts are on the bottom of the speaker, the banana plug extends below the bottom
surface and the speaker can't sit flat on a shelf. Single banana plugs may work with
some wall brackets and stands.
Color-Coded: The speaker's binding posts are color-coded
(red/black) for easy identification between positive and negative.
Rubber Base: The PSB Imagine mini features an integrated
rubber base to help secure the speaker in place to prevent slippage and vibration.
Optional Speaker Stands: The PSB PFS-27 speaker stand (760PFS27, sold
separately) is designed specifically for the Imagine mini bookshelf loudspeaker.
Optional Wall-Mount Brackets: There are two M6 threaded inserts on the
bottom of each speaker that can be used with PSB's PWB-1 wall-mount bracket
(760PWB1, sold separately).
Note: The speakers contain no integrated
mounting brackets or keyhole slots.
- On Axis @ 0°: 55-23,000 Hz (+/-3 dB)
- On Axis @ 0°: 65-20,000 Hz (+/-1.5 dB)
- Off Axis @ 30°: 65-10,000 Hz (+/-1.5 dB)
- Low Frequency Cutoff -10 dB: 50 Hz
- Anechoic Chamber: 85 dB
- Typical Listening Room: 87 dB
Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to
find elsewhere. That's because we have our own in-house Product Research
team. They verify what’s in the box, check the owner's manual, and record
dimensions, features and specs. We stay on top of new products and technologies
to help people make informed choices.